Relais module High Low Trigger #352
Comments
|
it's switchmode1 not just switchmode (for the first switch)
also note that switchmodeN is for switches and buttonmodeN is for the buttons.
Buttons are the built-in buttons on the sonoffs, and switches were designed for
added switches.
|
|
What am I doing wrong?
|
|
what does your module configuration look like? (/md via the web interface, configuration -> module) |
|
Thanks for the tip! |
Jason2866
added a commit
that referenced
this issue
Aug 15, 2023
* Improvements to thermostat debug output (#19279) * add: update DEBUG_THERMOSTAT to only control the virtual switch Also, debug output is still generated but end user can control this debug level 3 * add: debug output of main controller parameters when thermostat enabled Also, add units for debug outputs added to make them more intelligible * Update xdrv_39_thermostat.ino * add: debug message when sensor is detected as not alive fix: display thermostat number in debug messages * add: log message prefix string for thermostat * Update xdrv_39_thermostat.ino fix: typos in comments add: debug messages * add: debug prefix for thermostat * add: debug prefix added to output lines * fix: comment typos and small grammatical changes for clarity * add: debug prefix 'THE' added to debug output * add section safeboot_flags in platform_tasmota32.ini (#19281) This will make it easier to ignore a bunch of libraries in order to speed up builds without polluting the ENV sections too much. Usage: [env:my_safeboot_env] lib_ignore = ${safeboot_flags.lib_ignore} * use common safeboot flags (#19282) * use common safeboot flags (#19282) (#352) Co-authored-by: Christian Baars <baars@klinikum-brandenburg.de> * use env var lib_ignore * fix IRAM_ATTR specified both in function declaration and definition (#19286) * Improvements to PID controller driver (#19285) * add: update DEBUG_THERMOSTAT to only control the virtual switch Also, debug output is still generated but end user can control this debug level 3 * add: debug output of main controller parameters when thermostat enabled Also, add units for debug outputs added to make them more intelligible * Update xdrv_39_thermostat.ino * add: debug message when sensor is detected as not alive fix: display thermostat number in debug messages * add: log message prefix string for thermostat * Update xdrv_39_thermostat.ino fix: typos in comments add: debug messages * add: debug prefix for thermostat * add: debug prefix added to output lines * fix: comment typos and small grammatical changes for clarity * add: debug prefix 'THE' added to debug output * add: display PID status and key info on web output * fix: remove extraneous comments that included unused code fragments * add: local sensor handling improvements add: define a local sensor name add: define the local sensor measurement parameter add: limit sensor not seen error message to every 60 seconds to avoid flooding the logs add: include interval since which sensor data was last updated fix: properly update the maximum interval time so missing sensor data is properly alerted * Update xdrv_49_pid.ino * Typo architceture → architecture (#19288) * avoid unnecessary compiling of specific libraries in lib32_div for most builds (#19293) * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * ESP32: pass flashmode at build time to macro definition (#19299) * pass flashmode at build time to macro definition * fix 8266 builds * fix: properly detect device is offline after maximum misses reached (#19298) * fix c6 env * Update changelogs * [DS18x20] Enhance use of aliases (#19026) * [DS18x20] Enhance use of aliases `defineDS18x20_USE_ID_AS_NAME`: Always show part of the address, even for one sensor `#define DS18x20_USE_ID_ALIAS`: The command `DS18Alias` can now be use with alphanumeric aliases, which replace the sensor name * [DS18x20] change to calloc() * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix OneWire for IDF5.1 and C2/C6 (#19303) * fix OneWire for IDF5.1 and C2/C6 * Use Onewire in arduino30 builds * use SOC specific defines for C2,C3 and C6 * Removes software based no load threshold. (#19302) Lowers ADE7953 builtin no load detection threshold to be able to measure 5 watt power levels. * Update changelogs * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * Creates a place to put the customer boards (#19309) * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * Add commands to allow setting of timeprop parameters (#19310) * add: commands to set timeprop settings * Update my_user_config.h * fix: properly generated json response to commands * Sync dev with release v13.1 * Update platformio_tasmota32.ini (#19313) --------- Co-authored-by: Paul Blacknell <blacknell@users.noreply.github.com> Co-authored-by: Christian Baars <baars@klinikum-brandenburg.de> Co-authored-by: Дилян Палаузов <dpa-github@aegee.org> Co-authored-by: Theo Arends <11044339+arendst@users.noreply.github.com> Co-authored-by: SteWers <42718143+SteWers@users.noreply.github.com> Co-authored-by: Christian Baars <Baars@gmx.de> Co-authored-by: paulusbrand <75862178+paulusbrand@users.noreply.github.com> Co-authored-by: Martin <79449686+marsman7@users.noreply.github.com>
Jason2866
added a commit
that referenced
this issue
Aug 16, 2023
* Improvements to thermostat debug output (#19279) * add: update DEBUG_THERMOSTAT to only control the virtual switch Also, debug output is still generated but end user can control this debug level 3 * add: debug output of main controller parameters when thermostat enabled Also, add units for debug outputs added to make them more intelligible * Update xdrv_39_thermostat.ino * add: debug message when sensor is detected as not alive fix: display thermostat number in debug messages * add: log message prefix string for thermostat * Update xdrv_39_thermostat.ino fix: typos in comments add: debug messages * add: debug prefix for thermostat * add: debug prefix added to output lines * fix: comment typos and small grammatical changes for clarity * add: debug prefix 'THE' added to debug output * add section safeboot_flags in platform_tasmota32.ini (#19281) This will make it easier to ignore a bunch of libraries in order to speed up builds without polluting the ENV sections too much. Usage: [env:my_safeboot_env] lib_ignore = ${safeboot_flags.lib_ignore} * use common safeboot flags (#19282) * fix IRAM_ATTR specified both in function declaration and definition (#19286) * Improvements to PID controller driver (#19285) * add: update DEBUG_THERMOSTAT to only control the virtual switch Also, debug output is still generated but end user can control this debug level 3 * add: debug output of main controller parameters when thermostat enabled Also, add units for debug outputs added to make them more intelligible * Update xdrv_39_thermostat.ino * add: debug message when sensor is detected as not alive fix: display thermostat number in debug messages * add: log message prefix string for thermostat * Update xdrv_39_thermostat.ino fix: typos in comments add: debug messages * add: debug prefix for thermostat * add: debug prefix added to output lines * fix: comment typos and small grammatical changes for clarity * add: debug prefix 'THE' added to debug output * add: display PID status and key info on web output * fix: remove extraneous comments that included unused code fragments * add: local sensor handling improvements add: define a local sensor name add: define the local sensor measurement parameter add: limit sensor not seen error message to every 60 seconds to avoid flooding the logs add: include interval since which sensor data was last updated fix: properly update the maximum interval time so missing sensor data is properly alerted * Update xdrv_49_pid.ino * Typo architceture → architecture (#19288) * avoid unnecessary compiling of specific libraries in lib32_div for most builds (#19293) * ESP32: pass flashmode at build time to macro definition (#19299) * pass flashmode at build time to macro definition * fix 8266 builds * fix: properly detect device is offline after maximum misses reached (#19298) * Update changelogs * [DS18x20] Enhance use of aliases (#19026) * [DS18x20] Enhance use of aliases `defineDS18x20_USE_ID_AS_NAME`: Always show part of the address, even for one sensor `#define DS18x20_USE_ID_ALIAS`: The command `DS18Alias` can now be use with alphanumeric aliases, which replace the sensor name * [DS18x20] change to calloc() * fix OneWire for IDF5.1 and C2/C6 (#19303) * fix OneWire for IDF5.1 and C2/C6 * Use Onewire in arduino30 builds * use SOC specific defines for C2,C3 and C6 * Removes software based no load threshold. (#19302) Lowers ADE7953 builtin no load detection threshold to be able to measure 5 watt power levels. * Update changelogs * Creates a place to put the customer boards (#19309) * Add commands to allow setting of timeprop parameters (#19310) * add: commands to set timeprop settings * Update my_user_config.h * fix: properly generated json response to commands * Sync dev with release v13.1 * Update platformio_tasmota32.ini (#19313) * add: shutdown command for PID controller (#19318) * C6 and C2 support (#363) * Initial C6 support * add C6 in tasmota_globals.h * fix copy&paste errors * Use updated platform (build 1481) * use common safeboot flags (#19282) (#352) Co-authored-by: Christian Baars <baars@klinikum-brandenburg.de> * use env var lib_ignore * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * fix c6 env * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * fix ESP32 Arduino 3.0 compile (needs work check) * Disable NeoPixel for C2 (no RMT support) * forgotten to remove * fix compiler warning * prep 5.1, TasUpdater * prep 5.1 SensirionRXFrame * prep 5.1, SensiriomI2CCommunication.cpp * prep5.1, last batch Sensirion * prep5.1, silence compiler warning * Silence C++ deprecated warning * Align with branch C6-support (#359) * prep5.1, fix berry_wire * revert deprecated compiler flag --------- Co-authored-by: Staars <baars@klinikum-brandenburg.de> Co-authored-by: Christian Baars <Baars@gmx.de> * add i2c #defines * enable more libs for ESP32 * refactor for esp-nimble-cpp * add esp-nimble-cpp, needed for C2,C6 * fix dual use of IRAM_ATTR for i2sDmaISR * silence compiler warning with cast * prep5.1, new DAC API in Berry * more libs enabled * NimBLE changes * fix wrong build flag for MI * add NimBLE ignores * add MI to env * use latest framework with changed NimBLE * add libesp32_div to C2/C6 * fix env konfig for NimBLE * new esp-cpp-nimble for all --------- Co-authored-by: Christian Baars <baars@klinikum-brandenburg.de> Co-authored-by: Christian Baars <Baars@gmx.de> --------- Co-authored-by: Paul Blacknell <blacknell@users.noreply.github.com> Co-authored-by: Christian Baars <baars@klinikum-brandenburg.de> Co-authored-by: Дилян Палаузов <dpa-github@aegee.org> Co-authored-by: Theo Arends <11044339+arendst@users.noreply.github.com> Co-authored-by: SteWers <42718143+SteWers@users.noreply.github.com> Co-authored-by: paulusbrand <75862178+paulusbrand@users.noreply.github.com> Co-authored-by: Martin <79449686+marsman7@users.noreply.github.com> Co-authored-by: Christian Baars <Baars@gmx.de>
Jason2866
added a commit
that referenced
this issue
Aug 18, 2023
* Initial C6 support * add C6 in tasmota_globals.h * fix copy&paste errors * Use updated platform (build 1481) * use common safeboot flags (#19282) (#352) Co-authored-by: Christian Baars <baars@klinikum-brandenburg.de> * use env var lib_ignore * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * fix c6 env * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * fix ESP32 Arduino 3.0 compile (needs work check) * Disable NeoPixel for C2 (no RMT support) * forgotten to remove * fix compiler warning * prep 5.1, TasUpdater * prep 5.1 SensirionRXFrame * prep 5.1, SensiriomI2CCommunication.cpp * prep5.1, last batch Sensirion * prep5.1, silence compiler warning * Silence C++ deprecated warning * Align with branch C6-support (#359) * prep5.1, fix berry_wire * revert deprecated compiler flag --------- Co-authored-by: Staars <baars@klinikum-brandenburg.de> Co-authored-by: Christian Baars <Baars@gmx.de> * add i2c #defines * enable more libs for ESP32 * refactor for esp-nimble-cpp * add esp-nimble-cpp, needed for C2,C6 * fix dual use of IRAM_ATTR for i2sDmaISR * silence compiler warning with cast * prep5.1, new DAC API in Berry * more libs enabled * NimBLE changes * fix wrong build flag for MI * add NimBLE ignores * add MI to env * use latest framework with changed NimBLE * add libesp32_div to C2/C6 * fix env konfig for NimBLE * new esp-cpp-nimble for all * prep5.1, silence compiler warning around IRAM_ATR * prep5.1, i2s pre-work * add c2 to lib esp-nimble-cpp * prep5.1, intermediate refactoring * prep5.1, intermediate refactoring * fix chirp for IDF>5 * prep5.1, fix compilation error * Update platformio_tasmota_core3_env.ini * prep5.1, SPI fixes for C2/C6 * prep5.1, fix universal display * enable uDisplay * c3cdc display * add odroid env * rm obsolote option * rm BLE from c3cdc * fix SD Card (changed sdkconfig) * cdc env, lvgl to all builds * add cdc safeboot * use framework build 1504 * prep5.1., intermediate restart * forgot to save * prep5.1, we love static cast * latest framework build 1510 * fix xsns_74_lmt01 * ditch NeoPixel-I2S for 5.1 * prep5.1, begin RMT C6 * Ethernet Test * forgot to upload * invert timing in led-encoder * build 1511 / IDF 5.1.0.230818 * compile NeopixelBus for C6 * re - uncomment * re - uncomment the next * enable Neopixel * One more Neopixel try * what a stupid typo * refac Pio Arduino 3.0 setup * updates ini's * disable by default core 32 Arduino 3.0 * disable uDisplay for S3 * Update tasmota_configurations_ESP32.h --------- Co-authored-by: Christian Baars <baars@klinikum-brandenburg.de> Co-authored-by: Christian Baars <Baars@gmx.de>
Jason2866
added a commit
that referenced
this issue
Aug 19, 2023
* Initial C6 support * add C6 in tasmota_globals.h * fix copy&paste errors * Use updated platform (build 1481) * use common safeboot flags (#19282) (#352) Co-authored-by: Christian Baars <baars@klinikum-brandenburg.de> * use env var lib_ignore * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * fix c6 env * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * fix ESP32 Arduino 3.0 compile (needs work check) * Disable NeoPixel for C2 (no RMT support) * forgotten to remove * fix compiler warning * prep 5.1, TasUpdater * prep 5.1 SensirionRXFrame * prep 5.1, SensiriomI2CCommunication.cpp * prep5.1, last batch Sensirion * prep5.1, silence compiler warning * Silence C++ deprecated warning * Align with branch C6-support (#359) * prep5.1, fix berry_wire * revert deprecated compiler flag --------- Co-authored-by: Staars <baars@klinikum-brandenburg.de> Co-authored-by: Christian Baars <Baars@gmx.de> * add i2c #defines * enable more libs for ESP32 * refactor for esp-nimble-cpp * add esp-nimble-cpp, needed for C2,C6 * fix dual use of IRAM_ATTR for i2sDmaISR * silence compiler warning with cast * prep5.1, new DAC API in Berry * more libs enabled * NimBLE changes * fix wrong build flag for MI * add NimBLE ignores * add MI to env * use latest framework with changed NimBLE * add libesp32_div to C2/C6 * fix env konfig for NimBLE * new esp-cpp-nimble for all * prep5.1, silence compiler warning around IRAM_ATR * prep5.1, i2s pre-work * add c2 to lib esp-nimble-cpp * prep5.1, intermediate refactoring * prep5.1, intermediate refactoring * fix chirp for IDF>5 * prep5.1, fix compilation error * Update platformio_tasmota_core3_env.ini * prep5.1, SPI fixes for C2/C6 * prep5.1, fix universal display * enable uDisplay * c3cdc display * add odroid env * rm obsolote option * rm BLE from c3cdc * fix SD Card (changed sdkconfig) * cdc env, lvgl to all builds * add cdc safeboot * use framework build 1504 * prep5.1., intermediate restart * forgot to save * prep5.1, we love static cast * latest framework build 1510 * fix xsns_74_lmt01 * ditch NeoPixel-I2S for 5.1 * prep5.1, begin RMT C6 * Ethernet Test * forgot to upload * invert timing in led-encoder * build 1511 / IDF 5.1.0.230818 * compile NeopixelBus for C6 * re - uncomment * re - uncomment the next * enable Neopixel * One more Neopixel try * what a stupid typo * refac Pio Arduino 3.0 setup * updates ini's * disable by default core 32 Arduino 3.0 * disable uDisplay for S3 * Update tasmota_configurations_ESP32.h * fix s3 compile * we need a new RMT LED driver for 5.1 for all SOC's * Todo: port udl for S3 * turn on NeoPixel again, as it does not crash anymore * first partly working version * Arduino 3.0 pio config to ignore * gitignore for override Arduino 3.0 * Delete platformio_tasmota_core3_env.ini --------- Co-authored-by: Christian Baars <baars@klinikum-brandenburg.de> Co-authored-by: Christian Baars <Baars@gmx.de>
Jason2866
added a commit
that referenced
this issue
Aug 19, 2023
* Initial C6 support * add C6 in tasmota_globals.h * fix copy&paste errors * Use updated platform (build 1481) * use common safeboot flags (#19282) (#352) Co-authored-by: Christian Baars <baars@klinikum-brandenburg.de> * use env var lib_ignore * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * fix c6 env * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * fix ESP32 Arduino 3.0 compile (needs work check) * Disable NeoPixel for C2 (no RMT support) * forgotten to remove * fix compiler warning * prep 5.1, TasUpdater * prep 5.1 SensirionRXFrame * prep 5.1, SensiriomI2CCommunication.cpp * prep5.1, last batch Sensirion * prep5.1, silence compiler warning * Silence C++ deprecated warning * Align with branch C6-support (#359) * prep5.1, fix berry_wire * revert deprecated compiler flag --------- Co-authored-by: Staars <baars@klinikum-brandenburg.de> Co-authored-by: Christian Baars <Baars@gmx.de> * add i2c #defines * enable more libs for ESP32 * refactor for esp-nimble-cpp * add esp-nimble-cpp, needed for C2,C6 * fix dual use of IRAM_ATTR for i2sDmaISR * silence compiler warning with cast * prep5.1, new DAC API in Berry * more libs enabled * NimBLE changes * fix wrong build flag for MI * add NimBLE ignores * add MI to env * use latest framework with changed NimBLE * add libesp32_div to C2/C6 * fix env konfig for NimBLE * new esp-cpp-nimble for all * prep5.1, silence compiler warning around IRAM_ATR * prep5.1, i2s pre-work * add c2 to lib esp-nimble-cpp * prep5.1, intermediate refactoring * prep5.1, intermediate refactoring * fix chirp for IDF>5 * prep5.1, fix compilation error * Update platformio_tasmota_core3_env.ini * prep5.1, SPI fixes for C2/C6 * prep5.1, fix universal display * enable uDisplay * c3cdc display * add odroid env * rm obsolote option * rm BLE from c3cdc * fix SD Card (changed sdkconfig) * cdc env, lvgl to all builds * add cdc safeboot * use framework build 1504 * prep5.1., intermediate restart * forgot to save * prep5.1, we love static cast * latest framework build 1510 * fix xsns_74_lmt01 * ditch NeoPixel-I2S for 5.1 * prep5.1, begin RMT C6 * Ethernet Test * forgot to upload * invert timing in led-encoder * build 1511 / IDF 5.1.0.230818 * compile NeopixelBus for C6 * re - uncomment * re - uncomment the next * enable Neopixel * One more Neopixel try * what a stupid typo * refac Pio Arduino 3.0 setup * updates ini's * disable by default core 32 Arduino 3.0 * disable uDisplay for S3 * Update tasmota_configurations_ESP32.h * fix s3 compile * we need a new RMT LED driver for 5.1 for all SOC's * Todo: port udl for S3 * turn on NeoPixel again, as it does not crash anymore * first partly working version * Arduino 3.0 pio config to ignore * gitignore for override Arduino 3.0 * Delete platformio_tasmota_core3_env.ini * Create platformio_tasmota_core3_env.ini * Delete platformio_tasmota_core3_env.ini * use more than pixel * deactivate Addlog storm * add platformio_tasmota_core3_env.ini to gitignore --------- Co-authored-by: Christian Baars <baars@klinikum-brandenburg.de> Co-authored-by: Christian Baars <Baars@gmx.de>
This was referenced Aug 19, 2023
arendst
pushed a commit
that referenced
this issue
Aug 19, 2023
* Initial C6 support * add C6 in tasmota_globals.h * fix copy&paste errors * Use updated platform (build 1481) * use common safeboot flags (#19282) (#352) * use env var lib_ignore * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * fix c6 env * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * fix ESP32 Arduino 3.0 compile (needs work check) * Disable NeoPixel for C2 (no RMT support) * forgotten to remove * fix compiler warning * prep 5.1, TasUpdater * prep 5.1 SensirionRXFrame * prep 5.1, SensiriomI2CCommunication.cpp * prep5.1, last batch Sensirion * prep5.1, silence compiler warning * Silence C++ deprecated warning * Align with branch C6-support (#359) * prep5.1, fix berry_wire * revert deprecated compiler flag --------- * add i2c #defines * enable more libs for ESP32 * refactor for esp-nimble-cpp * add esp-nimble-cpp, needed for C2,C6 * fix dual use of IRAM_ATTR for i2sDmaISR * silence compiler warning with cast * prep5.1, new DAC API in Berry * more libs enabled * NimBLE changes * fix wrong build flag for MI * add NimBLE ignores * add MI to env * use latest framework with changed NimBLE * add libesp32_div to C2/C6 * fix env konfig for NimBLE * new esp-cpp-nimble for all * prep5.1, silence compiler warning around IRAM_ATR * prep5.1, i2s pre-work * add c2 to lib esp-nimble-cpp * prep5.1, intermediate refactoring * prep5.1, intermediate refactoring * fix chirp for IDF>5 * prep5.1, fix compilation error * Update platformio_tasmota_core3_env.ini * prep5.1, SPI fixes for C2/C6 * prep5.1, fix universal display * enable uDisplay * c3cdc display * add odroid env * rm obsolote option * rm BLE from c3cdc * fix SD Card (changed sdkconfig) * cdc env, lvgl to all builds * add cdc safeboot * use framework build 1504 * prep5.1., intermediate restart * forgot to save * prep5.1, we love static cast * latest framework build 1510 * fix xsns_74_lmt01 * ditch NeoPixel-I2S for 5.1 * prep5.1, begin RMT C6 * Ethernet Test * forgot to upload * invert timing in led-encoder * build 1511 / IDF 5.1.0.230818 * compile NeopixelBus for C6 * re - uncomment * re - uncomment the next * enable Neopixel * One more Neopixel try * what a stupid typo * refac Pio Arduino 3.0 setup * updates ini's * disable by default core 32 Arduino 3.0 * disable uDisplay for S3 * Update tasmota_configurations_ESP32.h * latest C6/C2 wip (#19344) * Initial C6 support * add C6 in tasmota_globals.h * fix copy&paste errors * Use updated platform (build 1481) * use common safeboot flags (#19282) (#352) * use env var lib_ignore * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * fix c6 env * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * fix ESP32 Arduino 3.0 compile (needs work check) * Disable NeoPixel for C2 (no RMT support) * forgotten to remove * fix compiler warning * prep 5.1, TasUpdater * prep 5.1 SensirionRXFrame * prep 5.1, SensiriomI2CCommunication.cpp * prep5.1, last batch Sensirion * prep5.1, silence compiler warning * Silence C++ deprecated warning * Align with branch C6-support (#359) * prep5.1, fix berry_wire * revert deprecated compiler flag --------- * add i2c #defines * enable more libs for ESP32 * refactor for esp-nimble-cpp * add esp-nimble-cpp, needed for C2,C6 * fix dual use of IRAM_ATTR for i2sDmaISR * silence compiler warning with cast * prep5.1, new DAC API in Berry * more libs enabled * NimBLE changes * fix wrong build flag for MI * add NimBLE ignores * add MI to env * use latest framework with changed NimBLE * add libesp32_div to C2/C6 * fix env konfig for NimBLE * new esp-cpp-nimble for all * prep5.1, silence compiler warning around IRAM_ATR * prep5.1, i2s pre-work * add c2 to lib esp-nimble-cpp * prep5.1, intermediate refactoring * prep5.1, intermediate refactoring * fix chirp for IDF>5 * prep5.1, fix compilation error * Update platformio_tasmota_core3_env.ini * prep5.1, SPI fixes for C2/C6 * prep5.1, fix universal display * enable uDisplay * c3cdc display * add odroid env * rm obsolote option * rm BLE from c3cdc * fix SD Card (changed sdkconfig) * cdc env, lvgl to all builds * add cdc safeboot * use framework build 1504 * prep5.1., intermediate restart * forgot to save * prep5.1, we love static cast * latest framework build 1510 * fix xsns_74_lmt01 * ditch NeoPixel-I2S for 5.1 * prep5.1, begin RMT C6 * Ethernet Test * forgot to upload * invert timing in led-encoder * build 1511 / IDF 5.1.0.230818 * compile NeopixelBus for C6 * re - uncomment * re - uncomment the next * enable Neopixel * One more Neopixel try * what a stupid typo * refac Pio Arduino 3.0 setup * updates ini's * disable by default core 32 Arduino 3.0 * disable uDisplay for S3 * Update tasmota_configurations_ESP32.h --------- * fix s3 compile * fix s3 compile * we need a new RMT LED driver for 5.1 for all SOC's * Todo: port udl for S3 * turn on NeoPixel again, as it does not crash anymore * first partly working version * Arduino 3.0 pio config to ignore * gitignore for override Arduino 3.0 * Delete platformio_tasmota_core3_env.ini * Create platformio_tasmota_core3_env.ini * Delete platformio_tasmota_core3_env.ini * Delete platformio_tasmota_core3_env.ini * override ignore for Arduino 3.0 (#19349) * Initial C6 support * add C6 in tasmota_globals.h * fix copy&paste errors * Use updated platform (build 1481) * use common safeboot flags (#19282) (#352) * use env var lib_ignore * safeboot lib_ignore env * revert wrong change * rm eink lib from standard used libs * add c2-board 4M, maximum_size probably a bit off * diffuse idea for 2MB with OTA and FS * C2 and C6 additions * C2 and C6 additions for commands.ino * C2 and C6 additions for crash recorder * C2 to support_esp * some preps for C2 * add c2 to tasmota.h * fix some typos and compile bugs * fix 2 compiler warnings for Arduino 3.0 * fix another warning * add correct pins to template * pins for C2, maximum_size updated * unclutter env:tasmota32c2-safeboot * fix c6 env * more pins for the C2, but not all * pin 9 and 10 for c2/c6 * add || * prep pins for c6 * make c6 compile, needs testing * fix copy-paste-error * more correct pin support C6 * pin14 C6 * wrong warning for C6 * 10 and 11 are flash pins on the C6 * boolean voodoo * fix EVERYTHING * fix Onewire for Arduino 3.0 * enable OneWire * finale fix for all platforms: OneWire.h * better compatibility * final fix onewire * refactor Platformio Arduino 3.0 setup * overlooked needed `;` * refactor as requested * fix NeoPixelBus compilation for C2 and C6 * fix Arduino30 for old working NeoPixel boards * Try to switch of RMT LED when not SOC supported * use latest IDF 5.1 * framework includes now "libsodium" * prep NeoPixel RMT rewrite * NeoPixel for C6 * fix Arduino 2.x * really fix compile ?? * fix compiler warning TSL2591 * fix compiler warning TSL2591 _2 * fix compile warning TSL2561 * fix warning sensirion part 1 * fix ESP32 Arduino 3.0 compile (needs work check) * Disable NeoPixel for C2 (no RMT support) * forgotten to remove * fix compiler warning * prep 5.1, TasUpdater * prep 5.1 SensirionRXFrame * prep 5.1, SensiriomI2CCommunication.cpp * prep5.1, last batch Sensirion * prep5.1, silence compiler warning * Silence C++ deprecated warning * Align with branch C6-support (#359) * prep5.1, fix berry_wire * revert deprecated compiler flag --------- * add i2c #defines * enable more libs for ESP32 * refactor for esp-nimble-cpp * add esp-nimble-cpp, needed for C2,C6 * fix dual use of IRAM_ATTR for i2sDmaISR * silence compiler warning with cast * prep5.1, new DAC API in Berry * more libs enabled * NimBLE changes * fix wrong build flag for MI * add NimBLE ignores * add MI to env * use latest framework with changed NimBLE * add libesp32_div to C2/C6 * fix env konfig for NimBLE * new esp-cpp-nimble for all * prep5.1, silence compiler warning around IRAM_ATR * prep5.1, i2s pre-work * add c2 to lib esp-nimble-cpp * prep5.1, intermediate refactoring * prep5.1, intermediate refactoring * fix chirp for IDF>5 * prep5.1, fix compilation error * Update platformio_tasmota_core3_env.ini * prep5.1, SPI fixes for C2/C6 * prep5.1, fix universal display * enable uDisplay * c3cdc display * add odroid env * rm obsolote option * rm BLE from c3cdc * fix SD Card (changed sdkconfig) * cdc env, lvgl to all builds * add cdc safeboot * use framework build 1504 * prep5.1., intermediate restart * forgot to save * prep5.1, we love static cast * latest framework build 1510 * fix xsns_74_lmt01 * ditch NeoPixel-I2S for 5.1 * prep5.1, begin RMT C6 * Ethernet Test * forgot to upload * invert timing in led-encoder * build 1511 / IDF 5.1.0.230818 * compile NeopixelBus for C6 * re - uncomment * re - uncomment the next * enable Neopixel * One more Neopixel try * what a stupid typo * refac Pio Arduino 3.0 setup * updates ini's * disable by default core 32 Arduino 3.0 * disable uDisplay for S3 * Update tasmota_configurations_ESP32.h * fix s3 compile * we need a new RMT LED driver for 5.1 for all SOC's * Todo: port udl for S3 * turn on NeoPixel again, as it does not crash anymore * first partly working version * Arduino 3.0 pio config to ignore * gitignore for override Arduino 3.0 * Delete platformio_tasmota_core3_env.ini --------- * use more than pixel * deactivate Addlog storm --------- * Fix esp8266 Neopixel compile --------- * silly bug --------- Co-authored-by: Christian Baars <baars@klinikum-brandenburg.de> Co-authored-by: Christian Baars <Baars@gmx.de>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I have expand some sonoff basic modules with relay modules.
I noticed that when the toggle on the sonoff is Off the relais module using 0.6 Watt Power. When the toggle is On the module use 0.05 Watt.
I think it has to do with high and low level trigger.
I've looked and I saw the command SwitchMode, but this comand on te sonoff console displays:
MQTT: stat/sonoff/RESULT = {"Command":"Unknown"}
Does anyone know how I can turn the operation of the relay module so that when the toggle is Off the relay is at rest. I can just use the NC instead of NO to switch.
The text was updated successfully, but these errors were encountered: