feat(client-ec2): DescribeInstanceStatus now returns health informati…

…on on EBS volumes attached to Nitro instances

clients/client-ec2/src/commands/CopyImageCommand.ts

@@ -28,25 +28,16 @@ export interface CopyImageCommandInput extends CopyImageRequest {}
 export interface CopyImageCommandOutput extends CopyImageResult, __MetadataBearer {}
 
 /**
- * <p>Initiates the copy of an AMI. You can copy an AMI from one Region to another, or from a
- *       Region to an Outpost. You can't copy an AMI from an Outpost to a Region, from one Outpost
- *       to another, or within the same Outpost. To copy an AMI to another partition, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_CreateStoreImageTask.html">CreateStoreImageTask</a>.</p>
- *          <p>To copy an AMI from one Region to another, specify the source Region using the
- *      		<b>SourceRegion</b> parameter, and specify the
- *      		destination Region using its endpoint. Copies of encrypted backing snapshots for
- *      		the AMI are encrypted. Copies of unencrypted backing snapshots remain unencrypted,
- *      		unless you set <code>Encrypted</code> during the copy operation. You cannot
- *      		create an unencrypted copy of an encrypted backing snapshot.</p>
- *          <p>To copy an AMI from a Region to an Outpost, specify the source Region using the
- *    		<b>SourceRegion</b> parameter, and specify the
- *    		ARN of the destination Outpost using <b>DestinationOutpostArn</b>.
- *    		Backing snapshots copied to an Outpost are encrypted by default using the default
- *    		encryption key for the Region, or a different key that you specify in the request using
- *    		<b>KmsKeyId</b>. Outposts do not support unencrypted
- *    	  snapshots. For more information, <a href="https://docs.aws.amazon.com/ebs/latest/userguide/snapshots-outposts.html#ami">
- *    			Amazon EBS local snapshots on Outposts</a> in the <i>Amazon EBS User Guide</i>.</p>
- *          <p>For more information about the prerequisites and limits when copying an AMI, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/CopyingAMIs.html">Copy an AMI</a> in the
- *         <i>Amazon EC2 User Guide</i>.</p>
+ * <p>Initiates an AMI copy operation. You can copy an AMI from one Region to another, or from a
+ *       Region to an Outpost. You can't copy an AMI from an Outpost to a Region, from one Outpost to
+ *       another, or within the same Outpost. To copy an AMI to another partition, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_CreateStoreImageTask.html">CreateStoreImageTask</a>.</p>
+ *          <p>When you copy an AMI from one Region to another, the destination Region is the
+ *      	current Region.</p>
+ *          <p>When you copy an AMI from a Region to an Outpost, specify the ARN of the Outpost as
+ *    	  the destination. Backing snapshots copied to an Outpost are encrypted by default using
+ *    	  the default encryption key for the Region or the key that you specify. Outposts do not
+ *    	  support unencrypted snapshots.</p>
+ *          <p>For information about the prerequisites  when copying an AMI, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/CopyingAMIs.html">Copy an AMI</a> in the <i>Amazon EC2 User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

clients/client-ec2/src/commands/DeleteSecurityGroupCommand.ts

@@ -30,7 +30,7 @@ export interface DeleteSecurityGroupCommandOutput extends __MetadataBearer {}
 /**
  * <p>Deletes a security group.</p>
  *          <p>If you attempt to delete a security group that is associated with an instance or network interface or is
- * 			  referenced by another security group, the operation fails with
+ * 			  referenced by another security group in the same VPC, the operation fails with
  * 				<code>DependencyViolation</code>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.

clients/client-ec2/src/commands/DescribeInstanceStatusCommand.ts

@@ -127,6 +127,16 @@ export interface DescribeInstanceStatusCommandOutput extends DescribeInstanceSta
  * //         ],
  * //         Status: "ok" || "impaired" || "insufficient-data" || "not-applicable" || "initializing",
  * //       },
+ * //       AttachedEbsStatus: { // EbsStatusSummary
+ * //         Details: [ // EbsStatusDetailsList
+ * //           { // EbsStatusDetails
+ * //             ImpairedSince: new Date("TIMESTAMP"),
+ * //             Name: "reachability",
+ * //             Status: "passed" || "failed" || "insufficient-data" || "initializing",
+ * //           },
+ * //         ],
+ * //         Status: "ok" || "impaired" || "insufficient-data" || "not-applicable" || "initializing",
+ * //       },
  * //     },
  * //   ],
  * //   NextToken: "STRING_VALUE",

clients/client-ec2/src/commands/DescribeStaleSecurityGroupsCommand.ts

@@ -29,7 +29,7 @@ export interface DescribeStaleSecurityGroupsCommandOutput extends DescribeStaleS
 
 /**
  * <p>Describes the stale security group rules for security groups in a specified VPC.
- *           Rules are stale when they reference a deleted security group in the same VPC or peered VPC. Rules can also be stale if they reference a security group in a peer VPC for which the VPC peering connection has
+ *           Rules are stale when they reference a deleted security group in a peered VPC. Rules can also be stale if they reference a security group in a peer VPC for which the VPC peering connection has
  *           been deleted.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.

clients/client-ec2/src/commands/DisableSnapshotBlockPublicAccessCommand.ts

@@ -36,9 +36,15 @@ export interface DisableSnapshotBlockPublicAccessCommandOutput
  * <p>Disables the <i>block public access for snapshots</i> setting at
  *       the account level for the specified Amazon Web Services Region. After you disable block public
  *       access for snapshots in a Region, users can publicly share snapshots in that Region.</p>
- *          <p>If block public access is enabled in <code>block-all-sharing</code> mode, and
- *       you disable block public access, all snapshots that were previously publicly shared
- *       are no longer treated as private and they become publicly accessible again.</p>
+ *          <important>
+ *             <p>Enabling block public access for snapshots in <i>block-all-sharing</i>
+ *         mode does not change the permissions for snapshots that are already publicly shared.
+ *         Instead, it prevents these snapshots from be publicly visible and publicly accessible.
+ *         Therefore, the attributes for these snapshots still indicate that they are publicly
+ *         shared, even though they are not publicly available.</p>
+ *             <p>If you disable block public access , these snapshots will become publicly available
+ *         again.</p>
+ *          </important>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/ebs/latest/userguide/block-public-access-snapshots.html">
  *         Block public access for snapshots</a> in the <i>Amazon EBS User Guide</i> .</p>
  *          <p></p>

clients/client-ec2/src/commands/EnableSnapshotBlockPublicAccessCommand.ts

@@ -39,10 +39,15 @@ export interface EnableSnapshotBlockPublicAccessCommandOutput
  *       for snapshots in that Region. Snapshots that are already publicly shared are either
  *       treated as private or they remain publicly shared, depending on the
  *       <b>State</b> that you specify.</p>
- *          <p>If block public access is enabled in <code>block-all-sharing</code> mode, and
- *       you change the mode to <code>block-new-sharing</code>, all snapshots that were
- *       previously publicly shared are no longer treated as private and they become publicly
- *       accessible again.</p>
+ *          <important>
+ *             <p>Enabling block public access for snapshots in <i>block all sharing</i>
+ *         mode does not change the permissions for snapshots that are already publicly shared.
+ *         Instead, it prevents these snapshots from be publicly visible and publicly accessible.
+ *         Therefore, the attributes for these snapshots still indicate that they are publicly
+ *         shared, even though they are not publicly available.</p>
+ *             <p>If you later disable block public access or change the mode to <i>block new
+ *         sharing</i>, these snapshots will become publicly available again.</p>
+ *          </important>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/ebs/latest/userguide/block-public-access-snapshots.html">
  *       Block public access for snapshots</a> in the <i>Amazon EBS User Guide</i>.</p>
  * @example

clients/client-ec2/src/commands/GetInstanceMetadataDefaultsCommand.ts

@@ -6,8 +6,7 @@ import { MetadataBearer as __MetadataBearer } from "@smithy/types";
 
 import { EC2ClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../EC2Client";
 import { commonParams } from "../endpoint/EndpointParameters";
-import { GetInstanceMetadataDefaultsRequest } from "../models/models_5";
-import { GetInstanceMetadataDefaultsResult } from "../models/models_6";
+import { GetInstanceMetadataDefaultsRequest, GetInstanceMetadataDefaultsResult } from "../models/models_6";
 import { de_GetInstanceMetadataDefaultsCommand, se_GetInstanceMetadataDefaultsCommand } from "../protocols/Aws_ec2";
 
 /**

clients/client-ec2/src/commands/ModifyVpnConnectionOptionsCommand.ts

@@ -6,11 +6,11 @@ import { MetadataBearer as __MetadataBearer } from "@smithy/types";
 
 import { EC2ClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../EC2Client";
 import { commonParams } from "../endpoint/EndpointParameters";
+import { ModifyVpnConnectionOptionsRequest } from "../models/models_6";
 import {
-  ModifyVpnConnectionOptionsRequest,
   ModifyVpnConnectionOptionsResult,
   ModifyVpnConnectionOptionsResultFilterSensitiveLog,
-} from "../models/models_6";
+} from "../models/models_7";
 import { de_ModifyVpnConnectionOptionsCommand, se_ModifyVpnConnectionOptionsCommand } from "../protocols/Aws_ec2";
 
 /**

clients/client-ec2/src/commands/ModifyVpnTunnelCertificateCommand.ts

@@ -6,8 +6,8 @@ import { MetadataBearer as __MetadataBearer } from "@smithy/types";
 
 import { EC2ClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../EC2Client";
 import { commonParams } from "../endpoint/EndpointParameters";
-import { ModifyVpnTunnelCertificateRequest } from "../models/models_6";
 import {
+  ModifyVpnTunnelCertificateRequest,
   ModifyVpnTunnelCertificateResult,
   ModifyVpnTunnelCertificateResultFilterSensitiveLog,
 } from "../models/models_7";

clients/client-ec2/src/models/models_0.ts

@@ -7935,8 +7935,8 @@ export interface CopyImageRequest {
    * <p>Specifies whether the destination snapshots of the copied image should be encrypted. You
    *       can encrypt a copy of an unencrypted snapshot, but you cannot create an unencrypted copy of an
    *       encrypted snapshot. The default KMS key for Amazon EBS is used unless you specify a non-default
-   *       Key Management Service (KMS) KMS key using <code>KmsKeyId</code>. For more information, see <a href="https://docs.aws.amazon.com/ebs/latest/userguide/ebs-encryption.html">Amazon EBS encryption</a> in the
-   *         <i>Amazon EBS User Guide</i>.</p>
+   *       Key Management Service (KMS) KMS key using <code>KmsKeyId</code>. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/AMIEncryption.html">Use encryption with
+   *         EBS-backed AMIs</a> in the <i>Amazon EC2 User Guide</i>.</p>
    * @public
    */
   Encrypted?: boolean;

clients/client-ec2/src/models/models_1.ts

@@ -7968,7 +7968,7 @@ export interface RequestLaunchTemplateData {
   NetworkInterfaces?: LaunchTemplateInstanceNetworkInterfaceSpecificationRequest[];
 
   /**
-   * <p>The ID of the AMI in the format <code>ami-17characters00000</code>.</p>
+   * <p>The ID of the AMI in the format <code>ami-0ac394d6a3example</code>.</p>
    *          <p>Alternatively, you can specify a Systems Manager parameter, using one of the following
    *             formats. The Systems Manager parameter will resolve to an AMI ID on launch.</p>
    *          <p>To reference a public parameter:</p>