Skip to content

An optimised library providing CRC8, CRC16, and CRC32 computation functions for the STM8 microcontroller

License

Notifications You must be signed in to change notification settings

basilhussain/stm8-crc

Repository files navigation

Overview

This is a library providing CRC8, CRC16 and CRC32 computation functions for the STM8 microcontroller platform and the SDCC compiler. It aims to optimise for fast execution speed by implementing the CRC calculation functions with assembly code.

Implementations are included for the following CRC types:

  • CRC8-1WIRE (aka Dallas, Maxim, iButton)
  • CRC8-SAE-J1850 (aka OBD)
  • CRC8-AUTOSAR (aka CRC8H2F)
  • CRC16-ANSI (aka IBM, Modbus, USB)
  • CRC16-CCITT
  • CRC16-XMODEM
  • CRC32 (aka GZIP, PKZIP, PNG, ZMODEM)
  • CRC32-POSIX (aka cksum)

In addition to the library functions, code is also included for plain C reference implementations of each CRC function, as well as a test and benchmarking program.

Three variants of the library are available:

  • Fastest: uses lookup table calculation (where implemented, otherwise bitwise), trading larger code size for the fastest performance.
  • Faster: uses bitwise calculation with unrolled loops, making less of a trade-off of code size for speed.
  • Small: uses bitwise calculation, but without unrolled loops, to minimise code size at the expense of speed.

You may choose to use the variant which best suits your performance and/or code size needs. See also Code Size section below for details.

Setup

You may either use a pre-compiled version of the library, or build the library code yourself. See below for further details.

This library has been written to accommodate and provide for both 'medium' (16-bit address space) and 'large' (24-bit address space) STM8 memory models.

  • If you are building your project with either no specific SDCC memory model option, or the --model-medium option, then use one of the .lib library files without large suffix.
  • If you are building with --model-large, then use a .lib library file with large suffix.

Unsure? If your target STM8 microcontroller model has less than 32KB of flash memory, then choose the former version; if larger flash, then you probably want the latter.

Pre-compiled Library

Library files for each combination of performance variant and memory model are provided. The selection of provided pre-compiled .lib files is as follows:

Variant Memory Model Library Filename
Fastest Medium crc-fastest.lib
Fastest Large crc-large-fastest.lib
Faster Medium crc-faster.lib
Faster Large crc-large-faster.lib
Small Medium crc.lib
Small Large crc-large.lib

Once you have chosen which .lib file you will use:

  1. Extract the relevant .lib file and crc.h file from the release archive.
  2. Copy the two files to your project.

Building

This library is developed and built with the Code::Blocks IDE and SDCC compiler.

  1. Load the .cbp project file in Code::Blocks.
  2. Select the appropriate 'Library' build target for your chosen variant and STM8 memory model (see above) from the drop-down list on the compiler toolbar (or the Build > Select Target menu).
  3. Build the library by pressing the 'Build' icon on the compiler toolbar (or Ctrl-F9 keyboard shortcut, or Build > Build menu entry).
  4. Upon successful compilation, the resultant .lib file will be in the main base folder.
  5. Copy the .lib file and the crc.h file to your project.

Usage

  1. Include the crc.h file in your C code wherever you want to use the CRC functions.
  2. When compiling, provide the path to the .lib file with the -l SDCC command-line option.

For each CRC type, there are three functions provided: one that gives the appropriate initial value for that CRC variant, one for incrementally computing the CRC on a byte-by-byte basis, and one for finalising the CRC value.

To calculate a CRC:

  1. Declare a variable of appropriate type (uint8_t for CRC8, uint16_t for CRC16, uint32_t for CRC32) to hold the CRC value, and assign its initial value using the relevant 'init' function. Always assign the initial value this way, or you may end up computing incorrect CRC values!
  2. For each byte of data that you wish to compute the CRC for, call the relevant 'update' function, passing the existing CRC variable value, and the data byte. The function will return a new CRC value, which should be re-assigned to the CRC variable.
  3. Lastly, call the relevant 'final' function, passing the current CRC value. It will return the finalised CRC value. Again, do not miss this step, or the CRC value may be incorrect! It should also be noted that you should not continue to update the CRC value (with 'update' function calls) once this function has been used.

Please note that no functions are provided for computing a CRC across a buffer of data, because such code is not only trivial to write but also bloats the library with potentially unneeded code.

Example

Calculating the 16-bit CCITT CRC of a data buffer:

#include "crc.h"

static const uint8_t data[] = { 0x01, 0x32, 0xF0, 0x21, 0x97, 0x68, 0x22, 0x3E };
uint16_t crc = crc16_ccitt_init();

for(size_t i = 0; i < (sizeof(data) / sizeof(data[0])); i++) {
	crc = crc16_ccitt_update(crc, data[i]);
}

crc = crc16_ccitt_final(crc);

Function Reference

uint8_t crc8_1wire_init()
uint8_t crc8_j1850_init()
uint8_t crc8_autosar_init()
uint16_t crc16_ansi_init()
uint16_t crc16_ccitt_init()
uint16_t crc16_xmodem_init()
uint32_t crc32_init()
uint32_t crc32_posix_init()

uint8_t crc8_1wire_update(uint8_t crc, uint8_t data)
uint8_t crc8_j1850_update(uint8_t crc, uint8_t data)
uint8_t crc8_autosar_update(uint8_t crc, uint8_t data)
uint16_t crc16_ansi_update(uint16_t crc, uint8_t data)
uint16_t crc16_ccitt_update(uint16_t crc, uint8_t data)
uint16_t crc16_xmodem_update(uint16_t crc, uint8_t data)
uint32_t crc32_update(uint32_t crc, uint8_t data)
uint32_t crc32_posix_update(uint32_t crc, uint8_t data)

uint8_t crc8_1wire_final(crc)
uint8_t crc8_j1850_final(crc)
uint8_t crc8_autosar_final(crc)
uint16_t crc16_ansi_final(crc)
uint16_t crc16_ccitt_final(crc)
uint16_t crc16_xmodem_final(crc)
uint32_t crc32_final(crc)
uint32_t crc32_posix_final(crc)

Note: the 'init' functions are actually macro definitions, so you may use them anywhere that a literal constant value is valid (e.g. initialisation of an array). The 'final' functions are also macros, but are not suitable for use in this way - rather, they are macros for the purposes of compiler optimisation.

Benchmarks

To benchmark the fastest optimised assembly implementations, they were compared with the execution speed of equivalent plain C implementations. Each function was run for 10,000 iterations, on each iteration updating the CRC value with a fixed data byte of 0x55. Code was compiled using SDCC's default 'balanced' optimisation level. The benchmark was ran using the μCsim microcontroller simulator included with SDCC. The number of clock cycles consumed by all iterations of the loop (but not including initial value assignment or final XOR-out) was measured using the timer commands of μCsim.

CRC Type C Cycles ASM Cycles Ratio
CRC8-1WIRE 1,750,009 700,017 40.0%
CRC8-SAE-J1850 1,649,999 700,017 42.4%
CRC8-AUTOSAR 1,650,005 700,017 42.4%
CRC16-ANSI 2,188,720 979,368 44.7%
CRC16-CCITT 2,121,168 980,592 46.2%
CRC16-XMODEM†
CRC32 3,101,488 1,250,018 40.3%
CRC32-POSIX 3,010,438 1,250,018 41.5%

(† See CCITT - algorithm is the same; only differs by initial value)

Overall, the optimised assembly implementations execute in roughly 40% the time of the reference C implementations.

To confirm these results, the benchmark code was also ran on physical STM8 hardware (an STM8S208RBT6 Nucleo-64 board), with timing (in milliseconds) measured by capturing with a logic analyser the toggling of an IO pin before and after each iteration loop. A roughly equal relationship between the speed of reference C code and optimised assembly implementations was observed, confirming that the simulator results are accurate.

For the code used in the reference C implementations, see the crc_ref.c file. The benchmark code is in the benchmark() function of the main.c test program.

Code Size

For the faster and fastest performing variants of this library, generally some trade-offs often have to be made, and in the case of these variants, it is at the expense of compiled code size. Primarily due to the use of lookup tables (LUTs) and/or loop-unrolling, the size of the assembly CRC functions are much larger than their reference C counterparts, but not by an egregious amount - typically only around twice the size.

Some selected comparisons of size of 'update' functions (in bytes):

CRC Type Reference C Fastest Faster Small
CRC8-1WIRE 39 45 45 16
CRC16-ANSI 45 89 89 24
CRC16-CCITT 46 89 89 24
CRC32 95 †211 187 38
CRC32-POSIX 93 †211 187 38

(† Includes size of associated lookup table)

The 'Fastest' variant is built with both ALGORITHM_LUT and ALGORITHM_BITWISE_UNROLLED defined. These definitions enable a lookup-table (LUT) based algorithm, or where not available (not all CRC types have it) a bitwise algorithm with unrolled loops.

The 'Faster' variant is built only with ALGORITHM_BITWISE_UNROLLED defined, so only bitwise algorithms with unrolled loops are enabled - no LUT algorithms.

The 'Small' variant is built with neither of the above definitions, so only looped bitwise algorithms are used. While this will compromise the execution speed, it may still be faster than the reference C implementations.

Licence

This library is licenced under the MIT Licence. See source code headers for full licence text.

Contributing

Bug fixes, further optimisations, or additional CRC implementations are welcome. Please create a new GitHub issue or pull request.

About

An optimised library providing CRC8, CRC16, and CRC32 computation functions for the STM8 microcontroller

Topics

Resources

License

Stars

Watchers

Forks

Packages

No packages published