Support for ACE ?

[liberodark]

Hi,

You think is possible to support SV06 ACE ?
Or they have too many change on this model ?

Best Regards

[bassamanator]

What are you trying to accomplish exactly?

[liberodark]

Hi,

I'm not sure about the initial state of the firmware and Sovol configurations.
I found your project by chance and wanted to know if it could be used on the Sovol SV06 ACE?

Best Regards

[bassamanator]

Absolutely! Please follow the download instructions section on the any-printer branch.

You will have to remove the macros from your existing configuration, however. I guess you could add the include line at the very bottom of your printer.cfg, and that should override any conflicts, that is, the last include will take precedence.

Let me know if you have any more questions.

[liberodark]

Hi,

Since I have the SV06 ACE from Sovol?
Would it be possible to make a dedicated branch?
I can send you all the configuration files to modify etc...
https://paste.yunohost.org/ocadowucef.yaml (printer.cfg)
https://paste.yunohost.org/abeyuwozuk.yaml (moonraker.conf)

I can precise also SV06 ACE is Klipper Printer :
https://www.sovol3d.com/products/sovol-sv06-ace

Best Regards

[bassamanator]

The purpose of the repo is to help Klipperize these printers. Since the ACE is already running Klipper, there is no reason to create a dedicated branch for it.

My config can be easily used with this printer as I mentioned. After downloading via the instructions on the any printer branch, simply include it as follows:

[include mainsail.cfg]
[include timelapse.cfg]
[include moonraker_obico_macros.cfg]
[include MCU_ID.cfg]
[include Macro.cfg]
[include here]
...

All ACE Klipper related files can be found here btw.