-
Notifications
You must be signed in to change notification settings - Fork 184
Compatibility
bb-qq edited this page Jan 23, 2022
·
15 revisions
This page is a list of reports from users. Reports are accepted this thread. I would appreciate it if you join here!
If you visited here from some forums, please share URLs of them. I will gather reports from there and add them to this page.
-
Not work
- Failed to install the driver or the device is not recognized correctly
-
Work
- The device seems to work correctly
- It is expected to work stably, but further verification is needed.
-
Stable
- No major issue over 2 weeks
- No major issue with large file transfer(at least 30min, speed degradation due to thermal throttling may occur)
-
Unstable
- Disconnection or other major issues are observed under long-term use or high load condition
-
Slow
- The device works, but it has performance issues
- Older models or models that come with less memory seem to have stability/performance issues on the USB Host controller or kernel driver.
- However, since hardware seems to have individual differences, it is difficult to say whether it will work on your hardware or not.
- If you find the same configuration in this table and want further information, click the "Status" and ask the author of its report.
| DS model | product | Status report | Note |
|---|---|---|---|
| DS918+ (applolake) | Plannex USB-LAN2500R | Stable | Author's environment |
| DS918+ (applolake) | CableCreation 2.5G Ethernet to USB Adapter | Stable | |
| DS918+ (apollolake) | CLUB 3D CAC-1420 | Work | 2 adapters |
| DS918+ (apollolake) | CLUB 3D CAC-1420 | Work | |
| DS918+ (apollolake) | Cable Matters USB to 2.5G Ethernet Adapter | Work | |
| DS918+ (apollolake) | LLANO Wired 2500Mbps USB C 2.5G External Network Card | Work | |
| DS918+ (apollolake) | UGREEN USB C to 2.5G Ethernet Adapter | Work | Need to use the front port. |
| DS1019+ (apollolake) | CLUB 3D CAC-1420 | Stable | |
| DS1019+ (apollolake) | CLUB 3D CAC-1420 | Work | |
| DS718+ (apollolake) | CLUB 3D CAC-1420 | Work | |
| DS718+ (applolake) | UGREEN USB C to 2.5G Ethernet Adapter | Stable | |
| DS718+ (applolake) | ? | Work | |
| DS620slim (applolake) | EDUP 2.5Gbps USB to Ethernet Adapter | Work | |
| DS418play (apollolake) | TP-Link TL-UE300 (1Gbps) | Work | |
| DS418play (apollolake) | CLUB 3D CAC-1420 | Work | |
| DS218+ (apollolake) | TP-LINK TL-UG310 | Work | |
| DS218+ (apollolake) | CE-LINK RTL8153 Gigabit Ethernet Adapter | Work | |
| DS218+ (apollolake) | DriverGenius CUG025 | Work | |
| DS218+ (apollolake) | CLUB 3D CAC-1420 | Work | |
| DS218+ (apollolake) | TRENDnet TUC-ET2G | Work | only running with USB 480MBit/s |
| DS1821+ (v1000) | UGREEN USB C to 2.5G Ethernet Adapter | Work | Need to use the front port. |
| DS1520+ (geminilake) | CableCreation 2.5G Ethernet to USB Adapter | Stable | |
| DS1520+ (geminilake) | CLUB 3D CAC-1420 | Work | Enabling Jumbo Frames (MTU 9000 bytes) MAY cause the driver to hang after heavy network usage/transfers. |
| DS920+ (geminilake) | CSL USB 3.0 RJ45 Fast Ethernet (1Gbps) Adapter | Work | |
| DS920+ (geminilake) | CLUB 3D CAC-1420 | Work | |
| DS920+ (geminilake) | CLUB 3D CAC-1420 | Work | |
| DS920+ (geminilake) | TRENDnet TUC-ET2G | Work | only running with USB 480MBit/s |
| DS920+ (geminilake) | Plugable USBC-E2500 | Work | |
| DS920+ (geminilake) | CLUB 3D CAC-1420 | Unstable | |
| DS720+ (geminilake) | Alxum 2.5 Gigabit Ethernet Adapter | Work | |
| DS420+ (geminilake) | Plugable USBC-E2500 | Unstable | |
| DS220+ (geminilake) | Ankmax UC312G2 | Unstable | |
| RS820+ (denverton) | CLUB 3D CAC-1420 | Work | right port (rear) |
| DVA3219 (denverton) | Noname USB 3.0 Ethernet Adapter | Work | |
| DS1618+ (denverton) | UGREEN USB C to 2.5G Ethernet Adapter | Work | |
| DS1618+ (denverton) | UGREEN USB C to 2.5G Ethernet Adapter | Stable | |
| DS3617xs (broadwell) | CableCreation 2.5G Ethernet to USB Adapter | Work | |
| DS916+ (braswell) | CLUB 3D CAC-1420 | Stable | Only stable when use r8152-braswell-2.12.0-3.spk |
| DS916+ (braswell) | CLUB 3D CAC-1420 | Unstable | |
| DS916+ (braswell) | CLUB 3D CAC-1420 | Work | Auto-negotiation issue with TP-Link TL-SG108-M2 switch. |
| DS716+ II (braswell) | CLUB 3D CAC-1420 | Work | |
| DS716+ (braswell) | CLUB 3D CAC-1420 | Work | |
| DS416play (braswell) | i-tec USB-C Metal 2.5Gbps Ethernet Adapter | Stable | USB adapter needs to be plugged in the front port, both back ports are dropping connection all the time. |
| DS416play (braswell) | CLUB 3D CAC-1420 | Work | The 2nd adapter is not working |
| DS416Play (braswell) | Sabrent NT-S25G | Work | |
| DS216+ (braswell) | CLUB 3D CAC-1420 | Unstable | |
| DS2415+ (avaton) | CLUB 3D CAC-1420 | Unstable | |
| DS1815+ (avaton) | CLUB 3D CAC-1420 | Unstable | |
| DS1515+ (avaton) | UGREEN USB C to 2.5G Ethernet Adapter | Unstable | |
| DS415+ (avaton) | CableCreation 2.5G Ethernet to USB Adapter | Work | |
| DS415+ (avoton) | CLUB 3D CAC-1420 | Tbd | |
| DS415+ (avoton) | CLUB 3D CAC-1420 | Work | Using rear USB port (front 3.0 is not present on this model). |
| DS3615xs (bromolow) | Syncwire USB to Ethernet Adapter(1Gbps) | Work | Custom build for DSM 5.2 |
| DS220j (rtd1296) | ? | Unstable | |
| DS418 (rtd1296) | CLUB 3D CAC-1420 | Slow | |
| DS418j (rtd1296) | UGREEN USB C to 2.5G Ethernet Adapter | Untable | |
| DS416 (alpine4k) | ? | Work | |
| DS416slim (armada38x) | ? | Not Work | "Cannot allocate memory" error occured since this model has only 512MB RAM |
| DS216j (armada38x) | UGREEN USB C to 2.5G Ethernet Adapter | Work | Port: USB3.0 at back |
| DS715 (alpine) | ? | Work | |
| DS414 (armadaxp) | CLUB 3D CAC-1420 | Work | |
| DS214+ (armadaxp) | ? | Slow | |
| DS214play (evansport) | UGREEN USB C to 2.5G Ethernet Adapter | Slow | |
| DS1812+ (cedarview) | Sabrent NT-S25G and more | Slow | 5 adapters are tested, but all of them are not working properly |
| DS1812+ (cedarview) | Sabrent NT-S25G | Slow | |
| DS1512+ (cedarview) | CLUB 3D CAC-1420 | Slow | |
| DS412+ (cedarview) | ASUSTOR AS-U2.5G | Slow | Worked only in the top rear USB3.0 port |
| DS412+ (cedarview) | CLUB 3D CAC-1420 | Work | |
| DS412+ (cedarview) | Plugable USBC-E2500 | Work |
| DS | | Work | |