zfs_clone_range should return a descriptive error codes

Return the more descriptive error codes instead of `EXDEV` when
the parameters don't match the requirements of the clone function.
Updated the comments in `brt.c` accordingly.
The first three errors are just invalid parameters, which zfs can
not handle.
The fourth error indicates that the block which should be cloned
is created and cloned or modified in the same transaction
group (`txg`).

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Kay Pedersen <mail@mkwg.de>
Closes openzfs#15148

module/os/freebsd/zfs/zfs_vnops_os.c

@@ -6288,7 +6288,7 @@ zfs_freebsd_copy_file_range(struct vop_copy_file_range_args *ap)
 
 	error = zfs_clone_range(VTOZ(invp), ap->a_inoffp, VTOZ(outvp),
 	    ap->a_outoffp, &len, ap->a_outcred);
-	if (error == EXDEV || error == EOPNOTSUPP)
+	if (error == EXDEV || error == EINVAL || error == EOPNOTSUPP)
 		goto bad_locked_fallback;
 	*ap->a_lenp = (size_t)len;
 out_locked:

module/os/linux/zfs/zpl_file_range.c

@@ -103,15 +103,15 @@ zpl_copy_file_range(struct file *src_file, loff_t src_off,
 	 * Since Linux 5.3 the filesystem driver is responsible for executing
 	 * an appropriate fallback, and a generic fallback function is provided.
 	 */
-	if (ret == -EOPNOTSUPP || ret == -EXDEV)
+	if (ret == -EOPNOTSUPP || ret == -EINVAL || ret == -EXDEV)
 		ret = generic_copy_file_range(src_file, src_off, dst_file,
 		    dst_off, len, flags);
 #else
 	/*
 	 * Before Linux 5.3 the filesystem has to return -EOPNOTSUPP to signal
 	 * to the kernel that it should fallback to a content copy.
 	 */
-	if (ret == -EXDEV)
+	if (ret == -EINVAL || ret == -EXDEV)
 		ret = -EOPNOTSUPP;
 #endif /* HAVE_VFS_GENERIC_COPY_FILE_RANGE */
 

module/zfs/brt.c

@@ -174,7 +174,7 @@
  *	                size_t len, unsigned int flags);
  *
  * Even though offsets and length represent bytes, they have to be
- * block-aligned or we will return the EXDEV error so the upper layer can
+ * block-aligned or we will return an error so the upper layer can
  * fallback to the generic mechanism that will just copy the data.
  * Using copy_file_range(2) will call OS-independent zfs_clone_range() function.
  * This function was implemented based on zfs_write(), but instead of writing
@@ -192,9 +192,9 @@
  * Some special cases to consider and how we address them:
  * - The block we want to clone may have been created within the same
  *   transaction group that we are trying to clone. Such block has no BP
- *   allocated yet, so cannot be immediately cloned. We return EXDEV.
+ *   allocated yet, so cannot be immediately cloned. We return EAGAIN.
  * - The block we want to clone may have been modified within the same
- *   transaction group. We return EXDEV.
+ *   transaction group. We return EAGAIN.
  * - A block may be cloned multiple times during one transaction group (that's
  *   why pending list is actually a tree and not an append-only list - this
  *   way we can figure out faster if this block is cloned for the first time

module/zfs/zfs_vnops.c

@@ -1028,6 +1028,10 @@ zfs_exit_two(zfsvfs_t *zfsvfs1, zfsvfs_t *zfsvfs2, const char *tag)
  *
  * On success, the function return the number of bytes copied in *lenp.
  * Note, it doesn't return how much bytes are left to be copied.
+ * On errors which are caused by any file system limitations or
+ * brt limitations `EINVAL` is returned. In the most cases a user
+ * requested bad parameters, it could be possible to clone the file but
+ * some parameters don't match the requirements.
  */
 int
 zfs_clone_range(znode_t *inzp, uint64_t *inoffp, znode_t *outzp,
@@ -1171,23 +1175,23 @@ zfs_clone_range(znode_t *inzp, uint64_t *inoffp, znode_t *outzp,
 	 * We cannot clone into files with different block size.
 	 */
 	if (inblksz != outzp->z_blksz && outzp->z_size > inblksz) {
-		error = SET_ERROR(EXDEV);
+		error = SET_ERROR(EINVAL);
 		goto unlock;
 	}
 
 	/*
 	 * Offsets and len must be at block boundries.
 	 */
 	if ((inoff % inblksz) != 0 || (outoff % inblksz) != 0) {
-		error = SET_ERROR(EXDEV);
+		error = SET_ERROR(EINVAL);
 		goto unlock;
 	}
 	/*
 	 * Length must be multipe of blksz, except for the end of the file.
 	 */
 	if ((len % inblksz) != 0 &&
 	    (len < inzp->z_size - inoff || len < outzp->z_size - outoff)) {
-		error = SET_ERROR(EXDEV);
+		error = SET_ERROR(EINVAL);
 		goto unlock;
 	}
 
@@ -1246,9 +1250,6 @@ zfs_clone_range(znode_t *inzp, uint64_t *inoffp, znode_t *outzp,
 			 * in the current transaction group. Return an error,
 			 * so the caller can fallback to just copying the data.
 			 */
-			if (error == EAGAIN) {
-				error = SET_ERROR(EXDEV);
-			}
 			break;
 		}
 		/*