-
Notifications
You must be signed in to change notification settings - Fork 319
Installation
Chan_dongle runs only in asterisk 1.6.2 and asterisk 1.8. Asterisk 1.4 is not supported.
There is a lot of very good howto's explaining Asterisk installation. Take a look at this brief summary (Debian), but you can take a look at 1, 2 or 3 (in spanish).
Note that we don't need Dahdi channel to run chan_dongle, so it can be avoided.
Be careful with iptables and selinux. If needed, edit /etc/selinux/config and write:
SELINUX=disabled
SELINUXTYPE=targeted
Then, disable iptables
iptables -F
iptables-save > /etc/iptables.up.rules
or configure it to allow SIP (port 5060) and RTP (port 10000-20000) if you plan to use these protocols.
Now upgrade your system
apt-get update
apt-get upgrade
And install packages needed for compilation of asterisk
apt-get install linux-headers-`uname -r` gcc g++ make libnewt-dev libncurses5-dev openssl libssl-dev zlib1g-dev
Download source files and untar. Asterisk 1.6 is explained, but 1.8 looks similar.
wget http://downloads.asterisk.org/pub/telephony/asterisk/releases/asterisk-1.6.2.13.tar.gz
tar zxvf asterisk-1.6.2.13.tar.gz
If you will use FreePBX, then install asterisk-addons
wget http://downloads.asterisk.org/pub/telephony/asterisk/releases/asterisk-addons-1.6.2.2.tar.gz
tar zxvf asterisk-addons-1.6.2.2.tar.gz
Now compile
cd asterisk-1.6.2.13
make clean && ./configure --disable-xmldocs && make && make install && make config
If needed
make samples
If you installed asterisk as described here, go ahead. Anyway, check some dependencies like automake and autoconf. Also must have asterisk sources and development tools like make, gcc and so on.
svn checkout https://github.com/bg111/asterisk-chan-dongle/trunk/ dongle-read-only
cd dongle-read-only
aclocal && autoconf && automake -a
wget https://github.com/bg111/asterisk-chan-dongle/archive/master.zip
unzip master.zip
cd asterisk-chan-dongle-master
aclocal && autoconf && automake -a
./configure
configure options:
- --enable-debug
- --disable-debug
- --enable-manager
- --disable-manager
- --enable-apps
- --disable-apps
- --with-asterisk=/path_to_source/asterisk.h
usefull environment variables
- DESTDIR
- CFLAGS
- LDFLAGS
Examples
- DESTDIR=“/usr/lib/asterisk/modules” ./configure
- ./configure –with-asterisk=/usr/src/asterisk-1.6.2.13/include
- CFLAGS=“-I /usr/src/asterisk-1.6.2.13/include” ./configure
- ./configure --enable-debug
- ./configure --disable-apps --disable-manager
- CFLAGS=“-O0 -g” ./configure
- CFLAGS=“-Os” ./configure
default is
-
./configure --disable-debug --enable-apps --enable-manager
-
DESTDIR searching in /usr/lib/asterisk/modules and
-
asterisk.h searching in ../include /usr/include /usr/local/include /opt/local/include
For compile and build source to module
make
For install property configured and build module:
sudo make install
Once installed, copy example file dongle-read-only/etc/dongle.conf to /path_to_asterisk_config/ (i.e. /etc/asterisk/). Configure it as desired and start asterisk. To load, stop or restart chan_dongle:
CLI>module load chan_dongle.so
CLI>module unload chan_dongle.so
CLI>module reload chan_dongle.so