Watchy

Setup

1. In the Arduino IDE Boards Manager, install support for the ESP32. You can find instructions here: https://github.com/espressif/arduino-esp32/blob/master/docs/arduino-ide/boards_manager.md
2. Install the following libraries:
   • DS3232RTC
   • GxEPD
   • Watchy (This library)
3. Check out the examples under Examples -> Watchy
4. Compile & Upload with these board settings:
   • Board: "ESP32 Wrover Module"
   • All Other Settings: leave to default
   • You may have to install the CP2104 USB to Serial drivers if the port is not automatically detected
   • Have Fun! :)

Looking for Watchy hardware details? Go here https://github.com/sqfmi/Watchy-Hardware