Add support for MKS GB boards.

.github/workflows/buildBinary.yml

@@ -117,6 +117,9 @@ jobs:
       - name: Build MKS TFT35 V1.0
         run: platformio run --environment MKS_TFT35_V1_0
 
+      - name: Build MKS GD TFT28 V1.2-4
+        run: platformio run --environment MKS_GD_TFT28_V1_2-4
+
       - name: Remove Old Binaries
         run: find "Copy to SD Card root directory to update/" -name '*.bin' -print -delete
 

.github/workflows/buildTest.yml

@@ -113,3 +113,6 @@ jobs:
 
       - name: Build MKS TFT35 V1.0
         run: platformio run --environment MKS_TFT35_V1_0
+
+      - name: Build MKS GD TFT28 V1.2-4
+        run: platformio run --environment MKS_GD_TFT28_V1_2-4

Bootloaders/MKS TFT28/Artillery TFT28 V3.0.5 (GD32F305)/original/README.md

@@ -0,0 +1,17 @@
+# Dump of bootloader V3.0.5
+
+This is the bootloader dumped from MKS TFT Controller V1.4. It is only suitable for TFTs with GD32F305VCT6 MCU.
+Do not use on any other TFT !!!
+
+
+## Usage
+
+Require an ST-link tool attached to the SWD port of your TFT Controller (should be soldered).
+
+#### Dump
+
+Execute the command `st-flash read bootloader.bin 0x08000000 0x7000`
+
+#### Flash
+
+From this folder, execute the command `st-flash write MKSTFT28EVO.BIN 0x8000000`

README.md

@@ -89,6 +89,10 @@ Only the TFTs listed below are currently supported. Trying to install the firmwa
     MKS_TFT32L_V3_0
     MKS_TFT35_V1_0
 
+**MKS TFT with GigaDevice MCUs**
+
+    MKS_GD_TFT28_V1_2-4
+
 **WARNING:** BTT does not officially provide MKS TFT hardware support. MKS TFT is maintained by open source contributors and BTT does not bear any risk of MKS TFT hardware using this firmware.
 
 ## Software Repository
@@ -250,6 +254,12 @@ For **MKS TFTs**:
 1. The firmwares use the naming convention `MKS_TFT*_V*.*.*.x.bin`
 2. Any binary file for an MKS firmware (e.g. `MKS_TFT28_V4.0.27.x.bin`) **MUST** be renamed to `MKSTFT*.bin` (e.g. `MKSTFT28.bin`, `MKSTFT35.bin` etc.) in order it can be recognized and installed by the TFT
 
+For MKS TFTs **GigaDevice MCUs** (like the newest version of Genious Pro):
+
+1. rename the right binary (e.g. `MKS_GD_TFT28_V1_2-4.27.x.bin`) in `mkstft28evo.bin`
+2. create an empty `mkstft28.bin` file
+3. create two empty directories `mks_font` and `mks_pic`
+
 For example, for BTT TFT35 V3 select:
 
 `BIGTREE_TFT35_V3.0.27.x.bin`
@@ -463,6 +473,7 @@ Please, see [Customization Guides](https://github.com/bigtreetech/BIGTREETECH-To
 ;MKS_TFT28_V4_0
 ;MKS_TFT28_NEW_GENIUS
 ;MKS_TFT35_V1_0
+;MKS_GD_TFT28_V1_2-4
 [platformio]
 src_dir      = TFT
 boards_dir   = buildroot/boards