Enable all default bluetooth drivers to debian parity

As explained in #7 we can not use USB BT dongles with the CB1 for use with environmental sensors or HCI devices.

We therefore enable the BT subsystem in the kernel config

external/config/kernel/linux-5.16-sun50iw9-current.config

@@ -1700,7 +1700,68 @@ CONFIG_CAN_UCAN=m
 # CONFIG_CAN_DEBUG_DEVICES is not set
 # end of CAN Device Drivers
 
-# CONFIG_BT is not set
+CONFIG_BT=m
+CONFIG_BT_BREDR=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+CONFIG_BT_HS=y
+CONFIG_BT_LE=y
+CONFIG_BT_6LOWPAN=m
+CONFIG_BT_LEDS=y
+CONFIG_BT_MSFTEXT=y
+CONFIG_BT_AOSPEXT=y
+CONFIG_BT_DEBUGFS=y
+# CONFIG_BT_SELFTEST is not set
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_INTEL=m
+CONFIG_BT_BCM=m
+CONFIG_BT_RTL=m
+CONFIG_BT_QCA=m
+CONFIG_BT_MTK=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
+CONFIG_BT_HCIBTUSB_BCM=y
+CONFIG_BT_HCIBTUSB_MTK=y
+CONFIG_BT_HCIBTUSB_RTL=y
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_SERDEV=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_NOKIA=m
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIUART_INTEL=y
+CONFIG_BT_HCIUART_BCM=y
+CONFIG_BT_HCIUART_RTL=y
+CONFIG_BT_HCIUART_QCA=y
+CONFIG_BT_HCIUART_AG6XX=y
+CONFIG_BT_HCIUART_MRVL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_BT_MTKSDIO=m
+CONFIG_BT_MTKUART=m
+CONFIG_BT_HCIRSI=m
+# CONFIG_BT_VIRTIO is not set
+# end of Bluetooth device drivers
+
 CONFIG_AF_RXRPC=m
 # CONFIG_AF_RXRPC_IPV6 is not set
 # CONFIG_AF_RXRPC_INJECT_LOSS is not set