CB1_Debian11_bullseye_minimal Image discussion #9
Replies: 25 comments 43 replies
-
|
This seems much better. Some errors still show up after boot, and I guess it has something to do with drivers/device tree. |
Beta Was this translation helpful? Give feedback.
-
|
Enabling spi breaks image, |
Beta Was this translation helpful? Give feedback.
-
|
im assuming you are attempting to setup a adxl for input shaping? I may be at the same hang up as you. |
Beta Was this translation helpful? Give feedback.
-
|
Well as i see it, No SPI support by default is no input shaping. But mine CB1 Debian image is now instable. So maybe test it with a RPI CM4 when they are available.... |
Beta Was this translation helpful? Give feedback.
-
|
in this upload they claim they tested it and it works. just wish they would tell us how. what klippy is hanging up on on my end is connecting to the secondary mcu that was setup per klipper's doc. refuses to boot if the cfg is calling for that mcu |
Beta Was this translation helpful? Give feedback.
-
|
Yeah same here with the loading issue. |
Beta Was this translation helpful? Give feedback.
-
|
Thank you for this, the update is nice |
Beta Was this translation helpful? Give feedback.
-
|
There is no Wi-Fi connection..... I can't configure it. ((((( |
Beta Was this translation helpful? Give feedback.
-
|
you edit system.cfg with wifi settings |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
Ok so I am having an issue My SSID on my wireless has a space in it and I have tried modify the /mnt/udisk/system.cfg with an escape character WIFI_SSID="xx\ xxxxxxx" but I still getting Error: invalid extra argument 'Wireless'. Any help would be appreciated this work on the rasberry pis no issue even with no escape character. |
Beta Was this translation helpful? Give feedback.
-
|
I could do that but why everything else on my network works fine this way. There is an issue and it needs to be addressed, you do not replace an engine for a flat tire. Plus with a guest network I have to connect to it to use my printers not a great solution. |
Beta Was this translation helpful? Give feedback.
-
|
This problem is confirmed, and a new version will be fixed and released soon. Sorry for the inconvenience |
Beta Was this translation helpful? Give feedback.
-
|
And everybody that bought v1. 0 are just beta testers and stuck with product that are no just stuck with product that just has flaws? |
Beta Was this translation helpful? Give feedback.
-
|
Well If there is a hardware issue I would hope they would standby it and replace it like they did there skr boards that were broken. I have 3 of these and would really disappointed. |
Beta Was this translation helpful? Give feedback.
-
|
I agree it'd very disappointing that it's reported that everything installs, how ever there is a difference between installed and actually working ie klippersceeen |
Beta Was this translation helpful? Give feedback.
-
|
I can't get my wifi to work either. I have edited the system.cfg file. It appears that mine keeps going up and down. |
Beta Was this translation helpful? Give feedback.
-
|
I can tell You I got one that is working fine and another one I got to connect for about 2 hours and now can't get it to connect again. I will be emailing support, |
Beta Was this translation helpful? Give feedback.
-
A had the same problem with both of my CB1 and I am pretty sure it is a SW problem. When I was trying ifconfig wlan0 kept vanishing and reappearing. I flashed back an older Ubuntu based image and the Wi-Fi is stable again. |
Beta Was this translation helpful? Give feedback.
-
I might be a bad solder joint on Wi-Fi module. I ha to resolder one of mine. The joint probably cracked when I installed the official heatsink. |
Beta Was this translation helpful? Give feedback.
-
|
The kernel crashes too I think it might be multiple issues with this one |
Beta Was this translation helpful? Give feedback.
-
|
I tried to email support but it requires you to use an news group server. I
had always heard BTT had such good products, this is the first of them that
I have bought and I am not impressed. This will probably be the last I buy
from them. I tried to open a ticket but the form requires an image and when
I try to add the image it errors out even though it is under their 5MB
limit. It won't let you submit the ticket without the image.
…On Sun, Aug 14, 2022 at 8:02 PM shawnchr ***@***.***> wrote:
I can tell You I got one that is working fine and another one I got to
connect for about 2 hours and now can't get it to connect again. I will be
emailing support,
—
Reply to this email directly, view it on GitHub
<#9 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AZGT3J5A4NSCLZHQ4YEX6QLVZGJJHANCNFSM55CQ7LXQ>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Not sure why you say it needs news group server I sent an email to the following address service001@biqu3d.com it has not been rejected or returned. I have not received a response but I also included this address info@biqu.equipment which I have gotten responses from. |
Beta Was this translation helpful? Give feedback.
-
I can confirm the ticketing form on biqu.equipment does not work, which made me very sad, too. I told them on messenger, but no-one answered. It seems like another do-your-own-support product. |
Beta Was this translation helpful? Give feedback.
-
|
If you go to their website and click on the address it asks for a news
group server.
…On Sun, Aug 14, 2022, 8:52 PM shawnchr ***@***.***> wrote:
Not sure why you say it needs news group server I sent an email to the
following address ***@***.*** it has not been rejected or
returned. I have not received a response but I also included this address
***@***.*** which I have gotten responses from.
—
Reply to this email directly, view it on GitHub
<#9 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AZGT3J7U6G33A2RMIDFRXQ3VZGPFNANCNFSM55CQ7LXQ>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Here is what you get if you go to their website and click on the email
address. It won't send unless you have filled in the newsgroup server.
…On Sun, Aug 14, 2022 at 8:52 PM shawnchr ***@***.***> wrote:
Not sure why you say it needs news group server I sent an email to the
following address ***@***.*** it has not been rejected or
returned. I have not received a response but I also included this address
***@***.*** which I have gotten responses from.
—
Reply to this email directly, view it on GitHub
<#9 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AZGT3J7U6G33A2RMIDFRXQ3VZGPFNANCNFSM55CQ7LXQ>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
That is the same thing mine is doing. The older image doesn't seem to work
anymore due to it appears that ubuntu doesn't have any releases for it. I
tried it before the Bullseye and it failed every time I tried to load it.
…On Mon, Aug 15, 2022 at 2:37 AM frutabruta ***@***.***> wrote:
I can't get my wifi to work either. I have edited the system.cfg file. It
appears that mine keeps going up and down. [image: wifi]
<https://user-images.githubusercontent.com/105725351/184559366-6b7c1516-6cdb-4f05-83a8-6ad27d26a713.png>
A had the same problem with both of my CB1 and I am pretty sure it is a SW
problem. When I was trying ifconfig wlan0 kept vanishing and reappearing. I
flashed back an older Ubuntu based image and the Wi-Fi is stable again.
—
Reply to this email directly, view it on GitHub
<#9 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AZGT3J4JQDAOCZW3SHX6HATVZHXVDANCNFSM55CQ7LXQ>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
You can upgrade the Ubuntu so that the apt would work again: |
Beta Was this translation helpful? Give feedback.
-
|
Das ist mein erstes BTT Produkte. leider funktionert nicht mal, das auf spielen der image datei auf die Sd karte. egal ob mit meine Config für wlan,nutzer eingaben. |
Beta Was this translation helpful? Give feedback.
-
|
Haben Sie der Partition auch einen Laufwerksbuchstaben zugewiesen? Die Partition mit der WIFI Config Datei ist FAT32 formatiert, das kann jedes Windows lesen und schreiben |
Beta Was this translation helpful? Give feedback.
-
|
are you using the new image based on debian bullseye?
…On Mon, Aug 15, 2022 at 11:56 AM Magic2991 ***@***.***> wrote:
Das ist mein erstes BTT Produkte. leider funktionert nicht mal, das auf
spielen der image datei auf die Sd karte. egal ob mit meine Config für
wlan,nutzer eingaben.
egal wo mit erstellt, etcher, rasyberry pi imager nur fehler meldundungen.
die partion mit der config erkennt windows nicht.
—
Reply to this email directly, view it on GitHub
<#9 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AZGT3J6JDBMD5VTP462K4GTVZJZB5ANCNFSM55CQ7LXQ>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
I have spotty Wi-Fi but my main problem is: I don’t see any uart device for the mcu. Is there a way to configure uart for this build? |
Beta Was this translation helpful? Give feedback.
-
|
How do I configure UART for this board? |
Beta Was this translation helpful? Give feedback.
-
|
@bigtreetech : Can you please tell us how to setup UART on this one? Most unconventional unix build I have seen till date |
Beta Was this translation helpful? Give feedback.
-
|
i can't make camera via CSI work :( |
Beta Was this translation helpful? Give feedback.
-
|
|
Beta Was this translation helpful? Give feedback.
-
|
Beta Was this translation helpful? Give feedback.
-
|
USB cameras work very well. I have AUSDOM AF640 and it works fine. Personally, I recommend USB cameras, connecting the camera to the CSI with a cable longer than 20cm may cause a problem. The camera on the USB cable is much more convenient and universal. |
Beta Was this translation helpful? Give feedback.
-
Thank you for advise @pawelksi, because i already have a Pi cam (clone) so i'm looking CSI to USB adapter but found nothing (have some CSI-2 to USB at aliexpress but i dont think it work for my Pi Cam because its CSI not CSI-2 :( ) , sigh. I think the one you mention above or Wyze Cam v3 (with modify focus screw for manual focus) will work okay, start buying them |
Beta Was this translation helpful? Give feedback.
-
|
I had a lot of problems with the Pi Cam and the genuine RPi as I connected the 50cm FCC cable. The picture was unstable and sometimes it was not there at all. I bought the Ausdom camera for $ 15 on Aliexpress, it was a promotion. |
Beta Was this translation helpful? Give feedback.
-
|
And i got random freeze system in middle of print also, sigh, i tried to replaced usb cable, tried other mirco sd card, buy a new official Raspberry Power Supply 5.1V 3A also, still random freeze and crash middle print, i dont know if cause OS system unstable or hardware problem, sighhhhhhhhhhhhhhh |
Beta Was this translation helpful? Give feedback.
-
you might be getting kernel panics; try to go back to Hurakan v 1.0.1; seems to be the most stable for now. |
Beta Was this translation helpful? Give feedback.
-
Thank you basha318i, so far it is, I tried 1.0.2.1 (Hurakan), after 24h wifi still connected (with Debian Bullseye i will disconnect after 6 hours and random disconnect also ) stable and didn't freeze after 10 prints. Thank you so much ;) |
Beta Was this translation helpful? Give feedback.
-
|
I also have Debian crashing. An error is displayed in SSH. I bought the CB1 with the M8P for the printer, not to play the beta tester. |
Beta Was this translation helpful? Give feedback.
-
|
@pawelksi: yes i installed 1.0.2.1 (Hurakan) for likely 8 days, very stable without any errors or crashes, but have to disable hibernate mode and set "wifi.powersave=2" (disable power saving) for wifi to keep it online day after day |
Beta Was this translation helpful? Give feedback.
-
|
Well, I was just wondering why after a long work I have to restart the system, and it just hibernated .. |
Beta Was this translation helpful? Give feedback.
-
|
CB1 with bullseye image just freezes after 5 minutes. HDMI output is distorted. |
Beta Was this translation helpful? Give feedback.
-
|
Mine is also distorted but "clears up" after a few minutes. |
Beta Was this translation helpful? Give feedback.
-
|
Hi! I installed octoprint on cb1, works fine but the wifi isn't available, I only can use it by cable, I use the last debian image |
Beta Was this translation helpful? Give feedback.
-
|
And I can't remove the plastic in |
Beta Was this translation helpful? Give feedback.
-
The 3M protective film is split in two pieces in my case: both parts are easy to peel of. |
Beta Was this translation helpful? Give feedback.
-
|
just gona leave it here |
Beta Was this translation helpful? Give feedback.
-
|
thank you, i got my cb1+ pi4b adapter + adxl345 working, with the image you shared. |
Beta Was this translation helpful? Give feedback.
-
|
My manta m8p+cb1 works thanks to this! Thank you a lot |
Beta Was this translation helpful? Give feedback.
-
For the pi4b adapter, did you use this wiring? And it works like this? |
Beta Was this translation helpful? Give feedback.
-
|
Yes for me with cb1+pi4b and OrangePi image |
Beta Was this translation helpful? Give feedback.
-
can you kindly tell me the pin names used on the m8p? Thank you |
Beta Was this translation helpful? Give feedback.
-
|
For the CB1 it is biqu/biqu
…On Fri, Sep 2, 2022 at 9:03 PM shawnchr ***@***.***> wrote:
Whats the username & pw?
—
Reply to this email directly, view it on GitHub
<#9 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AZGT3JYUCZNEFBSXMQNRJZTV4KWXTANCNFSM55CQ7LXQ>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
not for this image its not |
Beta Was this translation helpful? Give feedback.
-
|
orangepi/orangepi |
Beta Was this translation helpful? Give feedback.
-
|
I just heard from their support and they are telling me to change to a
different wifi network. They clearly have no intention of standing behind
their product.
…On Mon, Aug 15, 2022 at 3:21 AM frutabruta ***@***.***> wrote:
You can upgrade the Ubuntu so that the apt would work again:
Just type "impish" instead of "cosmic" and "jammy" instead of "bionic" in
this tutorial:
https://linuxconfig.org/how-to-downgrade-ubuntu-linux-system-to-its-previous-version
(Yes, despite the name, it works for upgrading)
—
Reply to this email directly, view it on GitHub
<#9 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AZGT3J7V5CQ6ZS6PCFQSOHDVZH4Y7ANCNFSM55CQ7LXQ>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
That is not the type of company I want to spend my money with. I heard from
their support and they just sent me the install doc and told me to do 5.4
of it which
I had already done.
…On Mon, Aug 15, 2022 at 2:57 AM frutabruta ***@***.***> wrote:
I tried to email support but it requires you to use an news group server.
I had always heard BTT had such good products, this is the first of them
that I have bought and I am not impressed. This will probably be the last I
buy from them. I tried to open a ticket but the form requires an image and
when I try to add the image it errors out even though it is under their 5MB
limit. It won't let you submit the ticket without the image.
… <#m_-3408053082472302721_>
On Sun, Aug 14, 2022 at 8:02 PM shawnchr *@*.*> wrote: I can tell You I
got one that is working fine and another one I got to connect for about 2
hours and now can't get it to connect again. I will be emailing support, —
Reply to this email directly, view it on GitHub <#9 (reply in thread)
<#9 (reply in thread)>>,
or unsubscribe
https://github.com/notifications/unsubscribe-auth/AZGT3J5A4NSCLZHQ4YEX6QLVZGJJHANCNFSM55CQ7LXQ
<https://github.com/notifications/unsubscribe-auth/AZGT3J5A4NSCLZHQ4YEX6QLVZGJJHANCNFSM55CQ7LXQ>
. You are receiving this because you commented.Message ID: @.*>
I can confirm the ticketing form on biqu.equipment does not work, which
made me very sad, too. I told them on messenger, but no-one answered. It
seems like another do-your-own-support product.
—
Reply to this email directly, view it on GitHub
<#9 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AZGT3JZY44O6EBLDZS3XY3LVZHZ5RANCNFSM55CQ7LXQ>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
I have just tried to send one to the emails you listed and will wait to see
their response.
…On Sun, Aug 14, 2022 at 8:52 PM shawnchr ***@***.***> wrote:
Not sure why you say it needs news group server I sent an email to the
following address ***@***.*** it has not been rejected or
returned. I have not received a response but I also included this address
***@***.*** which I have gotten responses from.
—
Reply to this email directly, view it on GitHub
<#9 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AZGT3J7U6G33A2RMIDFRXQ3VZGPFNANCNFSM55CQ7LXQ>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
I will look and see if that might be the case. Thanks for the info.
…On Mon, Aug 15, 2022 at 2:53 AM frutabruta ***@***.***> wrote:
I can tell You I got one that is working fine and another one I got to
connect for about 2 hours and now can't get it to connect again. I will be
emailing support,
I might be a bad solder joint on Wi-Fi module. I ha to resolder one of
mine. The joint probably cracked when I installed the official heatsink.
[image: IMG_20220815_094804]
<https://user-images.githubusercontent.com/62122818/184597294-7fee200c-679a-4c14-90f1-dfece35b4549.jpg>
—
Reply to this email directly, view it on GitHub
<#9 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AZGT3J5FSEN7L6G27AX5NJ3VZHZRJANCNFSM55CQ7LXQ>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Is it possible to change the boot image or add in a splash video? I have the CB1 connected to BTT Manta M8P and using the BTT HDMI5 screen. |
Beta Was this translation helpful? Give feedback.
and others
-
CB1_Debian11_bullseye_minimal_kernel4.9_20220730.img
This discussion was created from the release V1.1.0.
Know issues
Points to be discussed
Table. Is it necessary to build a more powerful shell tool (for example: Z shell)? Or do you have any recommendations?Tested feature
Klipper,Moonraker,Fluidd,Mainsail, andOctoprint + Klipperin localhost:5000 port with Kiauh. And All they can be normally connected to the motherboard to control the printer.sudo apt updatesudo apt install python3-numpy python3-matplotlib libatlas-base-dev~/klippy-env/bin/pip install -v numpythe libraries can be installed successfully and
TEST_RESONANCESrun normally.Beta Was this translation helpful? Give feedback.
All reactions