for Home Assistant

Component to integrate with the SNOOZ white noise sound machine as a fan entity on Home Assistant.

Installation

Requirements

Home Assistant host that supports Bluetooth Low Energy

• Tested on Raspberry Pi 4 w/ Home Assistant 2021.4.6

HACS

1. Add https://github.com/AustinBrunkhorst/snooz as a custom repository.
   • Alternatively copy custom_components/snooz/* to custom_components/snooz in your Home Assistant configuration directory.
2. Put your SNOOZ device in pairing mode.
3. Add the "SNOOZ Noise Maker" integration. Your device should be discovered automatically.

New to HACS? Learn more

Screenshots

Frequently asked questions

How do I enter pairing mode?

1. Unplug SNOOZ and let sit for 5 seconds.
2. Plug SNOOZ back in.
3. Confirm no other phones are trying to connect to the device.
4. With one finger, press and hold the power button on SNOOZ. Release when the lights start blinking (approximately 5 seconds).

My device isn't discovered on the integration setup

Make sure the SNOOZ device is in pairing mode and within Bluetooth range of the host device running Home Assistant.

Can I use the SNOOZ mobile app when the device is connected to Home Assistant?

No. This is a limitation with the SNOOZ device supporting only 1 simultaneous connection.

⚠ Disclaimer ⚠

This integration is in no way affiliated with SNOOZ. SNOOZ does not offer support for this integration, as it was built by reverse engineering communication with SNOOZ's mobile app.