Virtual Vehicle

Prerequisites

• cxxopts >= 3.0.0

• protobuf = 3.17.3

• balogger >= 1.2.0

• statesmurf >= 2.0.1

• modbuspp >= 0.3.1

• libosmium >= 2.17.3

  sudo apt install libosmium2-dev

• cmlib, need to export CMLIB_DIR

Arguments

• --config-path <string> path to JSON configuration file
• --map <string> full path to .osm file containing map
• --default-route <string> - name of the route that will be set as default
• -v | --verbose logs will be printed to console
• --log-path <path> logs will be saved to the provided path, default is ./
• --module-gateway-ip <string> IPv4 or hostname of ba daemon
• --module-gateway-port <int> ba daemon port
• -h | --help print help
• --wait=<int> how many seconds will the car wait in a stop, default is 10s
• --period=<int> maximum time period between two status messages sent to Module Gateway
• --speed-override=<int> override map speed
• --fleet-provider=<string> choose fleet provider, internal-protocol to use of Internal Fleet Protocol no-connection to use of dummy connection
• --vehicle-provider=<string> choose vehicle provider, simulation for use of OSM map gps for use of GPS provider
• --gps-provider=<string> choose GPS provider, rutx09 or ublox
• --rutx-ip=<int> IP address to Modbus server on rutx09
• --rutx-port=<int> port of Modbus server on rutx09
• --rutx-slave-id=<int> slave id of Modbus server on rutx09
• --stop-radius=<int> distance from a stop that will be determined as arrival at the stop

Settings

JSON file is used for setting all parameters of the program. Those settings can be overwritten by command line arguments. examples in ./config/*.json

general settings

• log-path - path to log file, string
• verbose - if true, logs will be printed to the console, bool
• period - the time period between two status messages sent to Module Gateway, int

vehicle settings

• vehicle-provider - vehicle provider, simulation for use of OSM map gps for use of GPS provider, string
• gps-settings - gps settings object

gps settings

• gps-provider - gps provider, rutx09 or ublox, string
• stop-radius - distance from a stop that will be determined as arrival to the stop, int
• rutx09-settings - rutx09 settings object

rutx09 settings

• rutx-ip - IP address to Modbus server on rutx09, string
• rutx-port - port of Modbus server on rutx09, int
• rutx-slave-id - slave id of Modbus server on rutx09, int

simulation settings

• speed-override - override map speed enable, bool
• map-override-mps - override map speed, int
• wait-at-stop - how many seconds will car wait in stop, int

Fleet settings

• fleet-provider - fleet provider, internal-protocol for use of internal protocol no-connection for use of dummy connection, string
• internal-protocol-settings - internal protocol settings object - module 1, device type 1 is hardcoded

internal protocol settings

• module-gateway-ip - IPv4 or hostname of module gateway, string
• module-gateway-port - ba module gateway port, int
• device-role - device role, string - part of device identification
• device-name - device name, string - part of device identification
• device-priority - device priority, int - part of device identification
• reconnect-period-s - period of reconnection to module gateway, int

map settings

• map - full path to .osm file containing map, string
• default-route - the name of the route that will be set as default, string

Fleet provider

Virtual vehicle provides the ability to choose a fleet communication provider with --fleet-provider=<string> argument. The options are:

• internal-protocol - connection to Module Gateway by Internal Client will be established, requires --ip=<string> and --port=<int> arguments to specify module gateway connection
• no-connection - no connection will be established, statuses will be discarded and the default command will be returned, for testing purposes

Vehicle provider

Virtual vehicle provides the ability to choose different simulation implementation with --vehicle-provider=<string> argument. The options are:

• simulation - car movement will be simulated and position will be based on the given map file (.osm format). Required parameters: --map=<string>, --route=<string>, optional arguments: --speed-override=<int>, --wait=<int>
• gps - virtual vehicle will report position based on external GPS source, no mission logic is implemented. Required parameters: --gps-provider=<string>

Gps provider

Provider used for GPS-based position reporting. The options are:

• rutx09 - position is obtained from RUTX09 router from Teltonika. Required parameters: --rutx-ip=<string>, --rutx-port=<int>, rutx-slave-id=<int>
• ublox - position is obtained from ublox device, NOT IMPLEMENTED

Cmake parameters

• BRINGAUTO_TESTS - if set to ON, tests will also be compiled, tests can be run with command ctest after successful build build
• BRINGAUTO_PACKAGE - if set to ON creates a package of vvu
• BRINGAUTO_INSTALL - if set to ON enables make install command
• BRINGAUTO_SYSTEM_DEP - if set to ON cmake will use system dependencies instead of CMlib storage packages
• BRINGAUTO_SAMPLES - if set to ON sample app will be compiled
• STATE_SMURF - enable state smurf compilation
• CMLIB_DIR - specify the path to cmakelib

Build

git clone https://github.com/bringauto/virtual-vehicle.git
git submodule update --init --recursive
mkdir _build && cd _build
cmake .. -DCMAKE_BUILD_TYPE=Release
make -j 8

Tests

Documentation for tests is in test/README.md

Smurf integration tests

Smurf integration tests are used to test Virtual vehicle integration with who Fleet Protocol stack using Etna.

Details and usage are described in StateSmurf documentation.

Map creation

For creating maps we use openstreet map editor. Maps are saved in open street map format (.osm). Each map contains a list of nodes (points on the route), a list of ways (parts of routes, connecting points), and a list of routes (composed of ways). One .osm file can contain multiple routes and they have to be named. Routes can share points and ways. A point can represent a stop and if it is a stop, it has to be named.

Start a new map

• Install java openstreet map editor (https://josm.openstreetmap.de/wiki/Cs:WikiStart)
• Under Imagery choose map source to visualize map (b&w open street map recommended)
• Under File create a new layer, name it (right side of the app), layer represents .osm file

Route creation

• Choose the draw nodes tool (left toolbar) and draw way (list of points connected by a line) by adding points, press ESC when finished, repeat until you have all the ways you need (usually one is enough if you do not want to share ways in multiple routes)

• With the select/move tool select all ways you want to include in the route and in the relation tab add a relation with the plus button

• in pop-up add required tags - type=<way> and name=<route name>

• in the same pop-up window add ways (selection tab) to route (members tab) and apply role "way"

• repeat if you want multiple routes, routes can share some parts with each other, that is why they consist of ways. If you do not intend to share parts of routes use one way per route

  

Stop addition

• select the point you want to make into stop (yellow dot and stop can be defined only on nodes, not on the line between them)
• in tags/membership tab click the plus button with the selected point and add tag stop=true and name=<stop name> (name has to be unique)
• you can also add speed=<target speed in m/s> as a tag to ANY point, it will set the MAXIMUM speed on that point

Export map

• Under file save map as <map name>.osm file
• .osm map example:

<?xml version='1.0' encoding='UTF-8'?>
<osm version='0.6' generator='JOSM'>
  <node id='-101752' action='modify' visible='true' lat='49.17426200443' lon='16.55092476726' />
  <node id='-101754' action='modify' visible='true' lat='49.17320987972' lon='16.55007718921' />
  <node id='-101755' action='modify' visible='true' lat='49.17327300432' lon='16.55111252725' />
  <node id='-101757' action='modify' visible='true' lat='49.17411470831' lon='16.55023812175' />
  <node id='-101758' action='modify' visible='true' lat='49.17438124381' lon='16.54963730693' />
  <node id='-101916' action='modify' visible='true' lat='49.17337821766' lon='16.55093550146' />
  <node id='-101918' action='modify' visible='true' lat='49.17347290948' lon='16.55081748426' />
  <node id='-101920' action='modify' visible='true' lat='49.17363774295' lon='16.55071556032'>
    <tag k='name' v='zastavka' />
    <tag k='stop' v='true' />
  </node>
  <node id='-101922' action='modify' visible='true' lat='49.17383063249' lon='16.55066728055' />
  <node id='-101924' action='modify' visible='true' lat='49.17397091532' lon='16.54929398954'>
    <tag k='speed' v='7' />
  </node>
  <node id='-101925' action='modify' visible='true' lat='49.17361670041' lon='16.54920815885' />
  <node id='-101926' action='modify' visible='true' lat='49.17394987292' lon='16.54962658346' />
  <node id='-101927' action='modify' visible='true' lat='49.17355006564' lon='16.54951393068'>
    <tag k='name' v='stopka' />
    <tag k='speed' v='5' />
    <tag k='stop' v='true' />
  </node>
  <node id='-101928' action='modify' visible='true' lat='49.17361582035' lon='16.54921151664' />
  <node id='-101929' action='modify' visible='true' lat='49.17354962397' lon='16.5495055538' />
  <node id='-101962' action='modify' visible='true' lat='49.17397266578' lon='16.54933623902' />
  <node id='-101963' action='modify' visible='true' lat='49.17397617285' lon='16.54929600589' />
  <node id='-101964' action='modify' visible='true' lat='49.17395469207' lon='16.5496272587' />
  <way id='-101782' action='modify' visible='true'>
    <nd ref='-101752' />
    <nd ref='-101922' />
    <nd ref='-101754' />
    <nd ref='-101755' />
    <nd ref='-101916' />
    <nd ref='-101918' />
    <nd ref='-101920' />
    <nd ref='-101757' />
    <nd ref='-101758' />
    <nd ref='-101752' />
  </way>
  <way id='-101939' action='modify' visible='true'>
    <nd ref='-101924' />
    <nd ref='-101925' />
  </way>
  <way id='-101940' action='modify' visible='true'>
    <nd ref='-101926' />
    <nd ref='-101927' />
  </way>
  <way id='-101941' action='modify' visible='true'>
    <nd ref='-101928' />
    <nd ref='-101929' />
  </way>
  <way id='-101951' action='modify' visible='true'>
    <nd ref='-101963' />
    <nd ref='-101964' />
  </way>
  <relation id='-99764' action='modify' visible='true'>
    <member type='way' ref='-101782' role='' />
    <tag k='name' v='nahoda' />
    <tag k='type' v='way' />
  </relation>
  <relation id='-99775' action='modify' visible='true'>
    <member type='way' ref='-101940' role='' />
    <member type='way' ref='-101939' role='' />
    <member type='way' ref='-101941' role='' />
    <member type='way' ref='-101951' role='' />
    <tag k='name' v='route 2' />
    <tag k='type' v='way' />
  </relation>
</osm>

Build and run docker image

Build docker image using

git clone https://github.com/bringauto/virtual-vehicle.git
git submodule update --init --recursive
docker build --tag virtual-vehicle-utility .

Run docker with parameters

docker run -ti --rm virtual-vehicle-utility /virtual-vehicle-utility/VirtualVehicle --config-path=<path to json file> --map=<path to map file> -v --route=<route name> --ip=<daemon ip> --port=<daemon port> --wait=<time to wait in stop in sec>

Examples:

docker run -ti --rm virtual-vehicle-utility /virtual-vehicle-utility/VirtualVehicle --config-path=/virtual-vehicle-utility/config/example.json

docker run -ti --rm virtual-vehicle-utility /virtual-vehicle-utility/VirtualVehicle --config-path=/virtual-vehicle-utility/config/example.json --map=/virtual-vehicle-utility/tests/maps/BorsodChem.osm -v --route=borsodchem --ip=127.0.0.1 --port=1536 --wait=10