Releases: bubnikv/ExtIO_Omnia
ExtIO Omnia 0.4
This is an experimental release of the OK1IAK's ExtIO_Omnia for the HDSDR console. Just unpack the binaries into the HDSDR installation directory and enjoy.
This release integrates control of Vojtech's firmware based CW keyer and transmit functionality. You will need to install Vojtech's firmware to your Omnia:
https://github.com/bubnikv/omniasdrbasicfirmware/releases
To install the firmware, please follow the guide:
https://github.com/bubnikv/omniasdrbasicfirmware/wiki/How-to-install-on-Windows-7
You will find the CW keyer controls at the bottom of the secondary waterfall.
You can set the output power and the transmit IQ balance from the "ExtIO" control dialog, which opens when the "ExtIO" button on the HDSDR interface is clicked.
Newly, you can control amplifier sequencing to avoid relay hot switching, wear and audio noise: The signal may b delayed from the side tone by 0 to 15ms, and a AMP hold off time may be set. Additionally it is now possible to enable / disable amplifier from the HDSDR UI.
ExtIO Omnia 0.3 Expermental Release
This is an experimental release of the OK1IAK's ExtIO_Omnia for the HDSDR console. Just unpack the binaries into the HDSDR installation directory and enjoy.
This release integrates control of Vojtech's firmware based CW keyer and transmit functionality. You will need to install Vojtech's firmware to your Omnia:
https://github.com/bubnikv/omniasdrbasicfirmware/releases
To install the firmware, please follow the guide:
https://github.com/bubnikv/omniasdrbasicfirmware/wiki/How-to-install-on-Windows-7
You will find the CW keyer controls at the bottom of the secondary waterfall.
You can set the output power and the transmit IQ balance from the "ExtIO" control dialog, which opens when the "ExtIO" button on the HDSDR interface is clicked.
ExtIO Omnia 0.2 Expermental Release
This is an experimental release of the OK1IAK's ExtIO_Omnia for the HDSDR console. Just unpack the binaries into the HDSDR installation directory and enjoy.
This release integrates control of Vojtech's firmware based CW keyer and transmit functionality. You will need to install Vojtech's firmware to your Omnia:
https://github.com/bubnikv/omniasdrbasicfirmware/releases
You will find the CW keyer controls at the bottom of the secondary waterfall.
ExtIO Omnia 0.1 Expermental Release
This is an experimental release of the OK1IAK's ExtIO_Omnia for the HDSDR console. Just unpack the binaries into the HDSDR installation directory and enjoy.
libusb-1.0 is used to control the Omnia hardware, therefore the Microsoft WinUSB driver may be used without a need to install any 3rd party kernel driver. Just use the Zadig application to assign the WinUSB driver to the Omnia.
Microsoft WASAPI audio API is used to link to the Omnia's receiver, therefore the user does not need to configure the Omnia audio input in HDSDR. Also the Omnia audio input IQ channels are swapped correctly.
This build also demonstrates the possibility of hooking into the HDSDR main window, changing the default layout of the HDSDR panels and adding new controls to the HDSDR main window. This demo shrinks the secondary waterfall and offers two additional buttons below the secondary waterfall, one opening a test message box, and the other toggling visibility of the secondary waterfall controls.