This charm provides the Cinder volume service for OpenStack. It is intended to be used alongside the other OpenStack components, starting with the Folsom release.
Cinder is made up of 3 separate services: an API service, a scheduler and a volume service. This charm allows them to be deployed in different combination, depending on user preference and requirements.
This charm was developed to support deploying Folsom on both Ubuntu Quantal and Ubuntu Precise. Since Cinder is only available for Ubuntu 12.04 via the Ubuntu Cloud Archive, deploying this charm to a Precise machine will by default install Cinder and its dependencies from the Cloud Archive.
Cinder may be deployed in a number of ways. This charm focuses on 3 main configurations. All require the existence of the other core OpenStack services deployed via Juju charms, specifically: mysql, rabbitmq-server, keystone and nova-cloud-controller. The following assumes these services have already been deployed.
The api server, scheduler and volume service are all deployed into the same unit. Local storage will be initialized as a LVM phsyical device, and a volume group initialized. Instance volumes will be created locally as logical volumes and exported to instances via iSCSI. This is ideal for small-scale deployments or testing:
cat >cinder.cfg <<END
cinder:
block-device: sdc
overwrite: true
END
juju deploy --config=cinder.cfg cinder
juju add-relation cinder keystone
juju add-relation cinder mysql
juju add-relation cinder rabbitmq-server
juju add-relation cinder nova-cloud-controller
Separating the volume service from the API service allows the storage pool to easily scale without the added complexity that accompanies load-balancing the API server. When we've exhausted local storage on volume server, we can simply add-unit to expand our capacity. Future requests to allocate volumes will be distributed across the pool of volume servers according to the availability of storage space.
cat >cinder.cfg <<END
cinder-api:
enabled-services: api, scheduler
cinder-volume:
enabled-services: volume
block-device: sdc
overwrite: true
END
juju deploy --config=cinder.cfg cinder cinder-api
juju deploy --config=cinder.cfg cinder cinder-volume
juju add-relation cinder-api mysql
juju add-relation cinder-api rabbitmq-server
juju add-relation cinder-api keystone
juju add-relation cinder-api nova-cloud-controller
juju add-relation cinder-volume mysql
juju add-relation cinder-volume rabbitmq-server
# When more storage is needed, simply add more volume servers.
juju add-unit cinder-volume
All 3 services can be deployed to the same unit, but instead of relying on local storage to back volumes an external Ceph cluster is used. This allows scalability and redundancy needs to be satisified and Cinder's RBD driver used to create, export and connect volumes to instances. This assumes a functioning Ceph cluster has already been deployed using the official Ceph charm and a relation exists between the Ceph service and the nova-compute service.
cat >cinder.cfg <<END
cinder:
block-device: None
END
juju deploy --config=cinder.cfg cinder
juju add-relation cinder ceph
juju add-relation cinder keystone
juju add-relation cinder mysql
juju add-relation cinder rabbitmq-server
juju add-relation cinder nova-cloud-controller
The default value for most config options should work for most deployments.
Users should be aware of three options, in particular:
openstack-origin: Allows Cinder to be installed from a specific apt repository. See config.yaml for a list of supported sources.
block-device: When using local storage, a block device should be specified to back a LVM volume group. It's important this device exists on all nodes that the service may be deployed to.
overwrite: Whether or not to wipe local storage that of data that may prevent it from being initialized as a LVM phsyical device. This includes filesystems and partition tables. CAUTION
enabled-services: Can be used to separate cinder services between service service units (see previous section)
There are two mutually exclusive high availability options: using virtual IP(s) or DNS. In both cases, a relationship to hacluster is required which provides the corosync back end HA functionality.
To use virtual IP(s) the clustered nodes must be on the same subnet such that the VIP is a valid IP on the subnet for one of the node's interfaces and each node has an interface in said subnet. The VIP becomes a highly-available API endpoint.
At a minimum, the config option 'vip' must be set in order to use virtual IP HA. If multiple networks are being used, a VIP should be provided for each network, separated by spaces. Optionally, vip_iface or vip_cidr may be specified.
To use DNS high availability there are several prerequisites. However, DNS HA does not require the clustered nodes to be on the same subnet. Currently the DNS HA feature is only available for MAAS 2.0 or greater environments. MAAS 2.0 requires Juju 2.0 or greater. The clustered nodes must have static or "reserved" IP addresses registered in MAAS. The DNS hostname(s) must be pre-registered in MAAS before use with DNS HA.
At a minimum, the config option 'dns-ha' must be set to true and at least one of 'os-public-hostname', 'os-internal-hostname' or 'os-internal-hostname' must be set in order to use DNS HA. One or more of the above hostnames may be set.
The charm will throw an exception in the following circumstances: If neither 'vip' nor 'dns-ha' is set and the charm is related to hacluster If both 'vip' and 'dns-ha' are set as they are mutually exclusive If 'dns-ha' is set and none of the os-{admin,internal,public}-hostname(s) are set
This charm supports the use of Juju Network Spaces, allowing the charm to be bound to network space configurations managed directly by Juju. This is only supported with Juju 2.0 and above.
API endpoints can be bound to distinct network spaces supporting the network separation of public, internal and admin endpoints.
Access to the underlying MySQL instance can also be bound to a specific space using the shared-db relation.
To use this feature, use the --bind option when deploying the charm:
juju deploy cinder --bind "public=public-space internal=internal-space admin=admin-space shared-db=internal-space"
alternatively these can also be provided as part of a juju native bundle configuration:
cinder:
charm: cs:xenial/cinder
num_units: 1
bindings:
public: public-space
admin: admin-space
internal: internal-space
shared-db: internal-space
NOTE: Spaces must be configured in the underlying provider prior to attempting to use them.
NOTE: Existing deployments using os-*-network configuration options will continue to function; these options are preferred over any network space binding provided if set.