✨ Update P2Pool to v4.2

[renovate]

This PR contains the following updates:

Package	Update	Change
SChernykh/p2pool	minor	v4.1 -> v4.2

---

Release Notes

SChernykh/p2pool (SChernykh/p2pool)

v4.2: P2Pool v4.2

Compare Source

Commits to master since this release

Changes in v4.2

New features:

• Stratum server now disconnects miners when it's not connected to P2Pool network to avoid wasting their hashrate
• Added an error code to error messages about opening/saving files

Bugfixes:

• Fixed a possible deadlock during the initial sync when a lot of hashrate (> 1 MH/s) is connected to Stratum (this bug was introduced in v4.0)
• Fixed Windows 7 compatibility
• Fixed a data race on shutdown
• Updated internal dependencies (libuv to v1.49.2)

Before you start mining, create a new wallet and don't use it for anything else but mining for privacy reasons - all wallet addresses are public on P2Pool! Only primary wallet address is supported - no subaddresses or integrated addresses.

It is strongly recommended to synchronize your system clock before you start mining!

Recommended monerod command line parameters:

./monerod --zmq-pub tcp://127.0.0.1:18083 --out-peers 32 --in-peers 64 --add-priority-node=p2pmd.xmrvsbeast.com:18080 --add-priority-node=nodes.hashvault.pro:18080 --disable-dns-checkpoints --enable-dns-blocklist

--out-peers 32 --in-peers 64 is needed to (1) have many connections to other nodes and (2) limit incoming connection count because it can grow uncontrollably and cause problems when it goes above 1000 (open files limit in Linux). If your network connection's upload bandwidth is less than 10 Mbit, use --out-peers 8 --in-peers 16 instead.

--add-priority-node=p2pmd.xmrvsbeast.com:18080 --add-priority-node=nodes.hashvault.pro:18080 is needed to have guaranteed good working nodes in your connected peers.

--disable-dns-checkpoints is needed to avoid periodical lags when DNS is updated (it's not needed when mining)
--enable-dns-blocklist is needed to ban known bad nodes

Usage:

• Run Monero daemon v0.18.3.4 or newer: ./monerod --zmq-pub tcp://127.0.0.1:18083 --out-peers 32 --in-peers 64 --add-priority-node=p2pmd.xmrvsbeast.com:18080 --add-priority-node=nodes.hashvault.pro:18080 --disable-dns-checkpoints --enable-dns-blocklist
• Run p2pool: ./p2pool --host 127.0.0.1 --wallet YOUR_WALLET_ADDRESS
• Start mining to port 3333 on your machine: ./xmrig -o 127.0.0.1:3333
• You can set custom difficulty for your miner to get more accurate stats on P2Pool side: ./xmrig -o 127.0.0.1:3333 -u x+50000 (it doesn't affect mining rewards in any way)
• To connect another mining rig to your P2Pool node, run ./xmrig -o YOUR_P2POOL_NODE_IP:3333 on that mining rig

Antivirus

Some antiviruses and firewalls may flag any Monero-related executables and archives, including P2Pool, as malware. This is because it contains RandomX mining code and therefore is considered as "mining software". To be sure that you downloaded the original binaries, always check SHA256 sums of what you downloaded - a GPG signed list of SHA256 sums is in sha256sums.txt.asc. You can read the instructions on how to do it here: https://www.getmonero.org/resources/user-guides/verification-windows-beginner.html - but to check P2Pool binaries, replace binaryFate's key with the GPG key provided here:

• GPG key to verify SHA256 sums can be downloaded from github or p2pool.io

v4.1.1: P2Pool v4.1.1

Compare Source

Commits to master since this release

P2Pool will hardfork to new consensus rules on October 12th, 2024 at 20:00 UTC (note that only P2Pool will hardfork, Monero blockchain will not hardfork on October 12th). Merge mining will be enabled at that time. You must update to P2Pool v4.0 or newer before this date.

Changes in v4.1.1

Bugfixes:

• JSON RPC: fixed some requests getting stuck sometimes, due to an incorrect curl API usage
• JSON RPC: fixed memory leak after an error
• Stratum: fixed an unaligned memory read when processing HTTP requests
• Stratum: correct response to HTTP GET/HEAD requests
• Stratum: don't show the shutdown warning for low diff shares
• Updated internal dependencies (libuv to v1.49.0, curl to v8.10.1, gRPC to v1.65.5, BoringSSL to the latest master branch)

Before you start mining, create a new wallet and don't use it for anything else but mining for privacy reasons - all wallet addresses are public on P2Pool! Only primary wallet address is supported - no subaddresses or integrated addresses.

It is strongly recommended to synchronize your system clock before you start mining!

Recommended monerod command line parameters:

./monerod --zmq-pub tcp://127.0.0.1:18083 --out-peers 32 --in-peers 64 --add-priority-node=p2pmd.xmrvsbeast.com:18080 --add-priority-node=nodes.hashvault.pro:18080 --disable-dns-checkpoints --enable-dns-blocklist

--out-peers 32 --in-peers 64 is needed to (1) have many connections to other nodes and (2) limit incoming connection count because it can grow uncontrollably and cause problems when it goes above 1000 (open files limit in Linux). If your network connection's upload bandwidth is less than 10 Mbit, use --out-peers 8 --in-peers 16 instead.

--add-priority-node=p2pmd.xmrvsbeast.com:18080 --add-priority-node=nodes.hashvault.pro:18080 is needed to have guaranteed good working nodes in your connected peers.

--disable-dns-checkpoints is needed to avoid periodical lags when DNS is updated (it's not needed when mining)
--enable-dns-blocklist is needed to ban known bad nodes

Usage:

• Run Monero daemon v0.18.3.4 or newer: ./monerod --zmq-pub tcp://127.0.0.1:18083 --out-peers 32 --in-peers 64 --add-priority-node=p2pmd.xmrvsbeast.com:18080 --add-priority-node=nodes.hashvault.pro:18080 --disable-dns-checkpoints --enable-dns-blocklist
• Run p2pool: ./p2pool --host 127.0.0.1 --wallet YOUR_WALLET_ADDRESS
• Start mining to port 3333 on your machine: ./xmrig -o 127.0.0.1:3333
• You can set custom difficulty for your miner to get more accurate stats on P2Pool side: ./xmrig -o 127.0.0.1:3333 -u x+50000 (it doesn't affect mining rewards in any way)
• To connect another mining rig to your P2Pool node, run ./xmrig -o YOUR_P2POOL_NODE_IP:3333 on that mining rig

Antivirus

Some antiviruses and firewalls may flag any Monero-related executables and archives, including P2Pool, as malware. This is because it contains RandomX mining code and therefore is considered as "mining software". To be sure that you downloaded the original binaries, always check SHA256 sums of what you downloaded - a GPG signed list of SHA256 sums is in sha256sums.txt.asc. You can read the instructions on how to do it here: https://www.getmonero.org/resources/user-guides/verification-windows-beginner.html - but to check P2Pool binaries, replace binaryFate's key with the GPG key provided here:

• GPG key to verify SHA256 sums can be downloaded from github or p2pool.io

---

Configuration

📅 Schedule: Branch creation - "after 1pm,before 3pm" in timezone Europe/Paris, Automerge - At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR is behind base branch, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

---

• If you want to rebase/retry this PR, check this box

---

This PR was generated by Mend Renovate. View the repository job log.