6LBR Runtime configuration

The “NVM” contains the runtime configuration of the 6LBR
Depending on the platform and the application linked into the 6LBR, the NVM can be updated via the webserver configuration page (Webserver-Overview), via the nvm file editor or via the flashing tool.

802.15.4 configuration

• Channel (x) : 802.15.4 channel, from 11 to 26 (Note, value is not validated)

WSN IP Configuration

• IP Prefix configuration (x) : manual | autoconfigured (Bridge mode only)
  Default value: autoconfigured
• IP Prefix (x) : manual | autoconfigured (Bridge mode only)
  Default value: aaaa::
• IP Address configuration (x) : manual | autoconfigured
  Default value: autoconfigured
• IP Address (x)
  Default value: aaaa::100

Ethernet IP Configuration

Bridge mode only :

• Default router address (x)
  Default value: bbbb::1

Router mode only :

• IP Prefix (x)
  Default value: bbbb::
• IP Address configuration (x) : manual | autoconfigured
  Default value: manual
• IP Address (x)
  Default value: bbbb::100
• Peer router address (x)
  Default value: bbbb::1
• RA daemon (x) : active | inactive
  Default value: active

Packet filtering and modification

Router mode :

• Address rewrite : active | inactive
  Default value: active

(x) : 6LBR will be restarted if modified