update from linux #2
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
The existing driver erroneously treats I2C_BLOCK_DATA and BLOCK_DATA commands the same. For I2C_BLOCK_DATA reads, the length of the read is provided in data->block[0], but the length itself should not be sent to the slave. In contrast, for BLOCK_DATA reads no length is specified since the length will be the first byte returned from the slave. When copying data back to the data buffer, for an I2C_BLOCK_DATA read we have to take care not to overwrite data->block[0] to avoid overwriting the length. A BLOCK_DATA read doesn't have this concern since the first byte returned by the device is the length and belongs in data->block[0]. For I2C_BLOCK_DATA writes, the length is also provided in data->block[0], but the length itself is not sent to the slave (in contrast to BLOCK_DATA writes where the length prefixes the data sent to the slave). This was tested on physical hardware using i2cdump with the i and s flags to test the behavior of I2C_BLOCK_DATA reads and BLOCK_DATA reads, respectively. Writes were not tested but the I2C_BLOCK_DATA write change is pretty simple to verify by inspection. Signed-off-by: Eudean Sun <eudean@arista.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
If you compile with: CONFIG_HID_HOLTEK=m CONFIG_HOLTEK_FF is not set You get the following warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/hid/hid-holtekff.o see include/linux/module.h for more information Fix this by moving the module info out of the #ifdef CONFIG_HOLTEK_FF block and into the un-guarded part of the file. Signed-off-by: Daniel Axtens <dja@axtens.net> Acked-by: Anssi Hannula <anssi.hannula@iki.fi> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Given all the effort distros have done with splash-screens to give users a nice clean boot experience, we really want dmesg --level=err to not print anything unless there is a real problem with either the hardware or the kernel. Buggy HID descriptors unfortunately happen all too often, so lower the log level to warning keep the console clear of error messages such as: [ 441.079664] apple 0005:05AC:0239.0003: unknown main item tag 0x0 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. Note that the original premature free of the parent node has already been fixed separately, but that fix was apparently never backported to stable. Fixes: 47654a1 ("usb: chipidea: msm: Restore wrapper settings after reset") Fixes: b74c431 ("usb: chipidea: msm: ci_hdrc_msm_probe() missing of_node_get()") Cc: stable <stable@vger.kernel.org> # 4.10: b74c431 Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
This patch adds support for PID 0x1101 of Telit ME910. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
Sierra Wireless EM7565 devices use the QCSERIAL_SWI layout for their serial ports T: Bus=01 Lev=03 Prnt=29 Port=01 Cnt=02 Dev#= 31 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=9091 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=Sierra Wireless EM7565 Qualcomm Snapdragon X16 LTE-A S: SerialNumber=xxxxxxxx C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms but need sendsetup = true for the NMEA port to make it work properly. Simplify the patch compared to v1 as suggested by Bjørn Mork by taking advantage of the fact that existing devices work with sendsetup = true too. Use sendsetup = true for the NMEA interface of QCSERIAL_SWI and add DEVICE_SWI entries for the EM7565 PID 0x9091 and the EM7565 QDL PID 0x9090. Tests with several MC73xx/MC74xx/MC77xx devices have been performed in order to verify backward compatibility. Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
Fix child-node lookups during probe, which ended up searching the whole device tree depth-first starting at the parents rather than just matching on their children. To make things worse, some parent nodes could end up being being prematurely freed (by tegra_xusb_pad_register()) as of_find_node_by_name() drops a reference to its first argument. Fixes: 53d2a71 ("phy: Add Tegra XUSB pad controller support") Cc: stable <stable@vger.kernel.org> # 4.7 Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
The platform_get_irq_byname() function returns negative if an error occurs. zero or positive number on success. platform_get_irq_byname() error checking for zero is not correct. Fixes: 6d6ce40 ("phy: cpcap-usb: Add CPCAP PMIC USB support") Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add pm_runtime_disable in err case to make the pm_runtime_enable/disable is invoked balanced. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
When USB is disabled, we get a link error for this driver because of the added OTG support drivers/phy/renesas/phy-rcar-gen3-usb2.o: In function `rcar_gen3_phy_usb2_probe': phy-rcar-gen3-usb2.c:(.text+0x250): undefined reference to `of_usb_get_dr_mode_by_phy' Other phy drivers select USB_COMMON for this, so let's do the same here. Fixes: 7e0540f ("phy: rcar-gen3-usb2: check dr_mode for otg mode") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Using PGDIR_SHIFT to identify espfix64 addresses on 5-level systems was wrong, and it resulted in panics due to unhandled double faults. Use P4D_SHIFT instead, which is correct on 4-level and 5-level machines. This fixes a panic when running x86 selftests on 5-level machines. Signed-off-by: Andy Lutomirski <luto@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Kees Cook <keescook@chromium.org> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 1d33b21 ("x86/espfix: Add support for 5-level paging") Link: http://lkml.kernel.org/r/24c898b4f44fdf8c22d93703850fb384ef87cfdc.1513035461.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
…ache Commit dfea747 ("drivers: base: cacheinfo: support DT overrides for cache properties") doesn't initialise the cache type if it's present only in DT and the architecture is not aware of it. They are unified system level cache which are generally transparent. This patch check if the cache type is set to NOCACHE but the DT node indicates that it's unified cache and sets the cache type accordingly. Fixes: dfea747 ("drivers: base: cacheinfo: support DT overrides for cache properties") Reported-and-tested-by: Tan Xiaojun <tanxiaojun@huawei.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Debian does not ship a 'mkisofs' symlink to genisoimage. All modern distros ship genisoimage, so just use that directly. That requires renaming the 'genisoimage' function. Also neaten up the 'for' loop while I'm in here. Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
WMI is the bus inside kernel, so, we may access the GUID via /sys/bus/wmi instead of doing this through /sys/devices path. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure Thunderbolt maintainers get to see patches that touch documentation of the Thunderbolt driver as well. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When ring enters polling mode we are expected to mask the ring interrupt before the callback is called. However, the current code actually unmasks it probably because of a copy-paste mistake. Mask the interrupt properly from now on. Fixes: 4ffe722 ("thunderbolt: Add polling mode for rings") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit d8aa7ee ("x86/mm: Add Secure Encrypted Virtualization (SEV) support") changed sme_active() from an inline function that referenced sme_me_mask to a non-inlined function in order to make the sev_enabled variable a static variable. This function was marked EXPORT_SYMBOL_GPL because at the time the patch was submitted, sme_me_mask was marked EXPORT_SYMBOL_GPL. Commit 87df261 ("x86/mm: Unbreak modules that rely on external PAGE_KERNEL availability") changed sme_me_mask variable from EXPORT_SYMBOL_GPL to EXPORT_SYMBOL, allowing external modules the ability to build with CONFIG_AMD_MEM_ENCRYPT=y. Now, however, with sev_active() no longer an inline function and marked as EXPORT_SYMBOL_GPL, external modules that use the DMA API are once again broken in 4.15. Since the DMA API is meant to be used by external modules, this needs to be changed. Change the sme_active() and sev_active() functions from EXPORT_SYMBOL_GPL to EXPORT_SYMBOL. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Link: https://lkml.kernel.org/r/20171215162011.14125.7113.stgit@tlendack-t1.amdoffice.net
CONFIG_NO_HZ_FULL doesn't make sense without CONFIG_CPU_ISOLATION. In fact enabling the first without the second is a regression as nohz_full= boot parameter gets silently ignored. Besides this unnatural combination hangs RCU gp kthread when running rcutorture for reasons that are not yet fully understood: rcu_preempt kthread starved for 9974 jiffies! g4294967208 +c4294967207 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x402 ->cpu=0 rcu_preempt I 7464 8 2 0x80000000 Call Trace: __schedule+0x493/0x620 schedule+0x24/0x40 schedule_timeout+0x330/0x3b0 ? preempt_count_sub+0xea/0x140 ? collect_expired_timers+0xb0/0xb0 rcu_gp_kthread+0x6bf/0xef0 This commit therefore makes NO_HZ_FULL select CPU_ISOLATION, which prevents all these bad behaviours. Reported-by: kernel test robot <xiaolong.ye@intel.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Christoph Lameter <cl@linux.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <kernellwp@gmail.com> Fixes: 5c4991e ("sched/isolation: Split out new CONFIG_CPU_ISOLATION=y config from CONFIG_NO_HZ_FULL") Link: http://lkml.kernel.org/r/1513275507-29200-2-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
The "isolcpus=" boot parameter support was always built-in before we moved the related code under CONFIG_CPU_ISOLATION. Having it disabled by default is very confusing for people accustomed to use this parameter. So enable it by dafault to keep the previous behaviour but keep it optable for those who want to tinify their kernels. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Christoph Lameter <cl@linux.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <kernellwp@gmail.com> Cc: kernel test robot <xiaolong.ye@intel.com> Link: http://lkml.kernel.org/r/1513275507-29200-3-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
…OLATION=y The "isolcpus=" and "nohz_full=" boot parameters depend on CPU Isolation support. Let's document that. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Christoph Lameter <cl@linux.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <kernellwp@gmail.com> Cc: kernel test robot <xiaolong.ye@intel.com> Link: http://lkml.kernel.org/r/1513275507-29200-4-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Without the patch, a device can't be thoroughly destroyed, because vmbus_device_register() -> kset_create_and_add() still holds a reference to the hv_device's device.kobj. Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Fixes: c2e5df6 ("vmbus: add per-channel sysfs info") Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
proc->files cleanup is initiated by binder_vma_close. Therefore a reference on the binder_proc is not enough to prevent the files_struct from being released while the binder_proc still has a reference. This can lead to an attempt to dereference the stale pointer obtained from proc->files prior to proc->files cleanup. This has been seen once in task_get_unused_fd_flags() when __alloc_fd() is called with a stale "files". The fix is to protect proc->files with a mutex to prevent cleanup while in use. Signed-off-by: Todd Kjos <tkjos@google.com> Cc: stable <stable@vger.kernel.org> # 4.14 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using the shell function for perl CFLAGS retrieval instead of back quotes (``). Both execute shell with the command, but the latter is more explicit and seems to be the preferred way. Also we don't have any other use of the back quotes in perf Makefiles. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20171108102739.30338-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On Fedora systems the perl and python CFLAGS/LDFLAGS include the hardened specs from redhat-rpm-config package. We apply them only for perl/python objects, which makes them not compatible with the rest of the objects and the build fails with: /usr/bin/ld: perf-in.o: relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a shared object; recompile with -f +PIC /usr/bin/ld: libperf.a(libperf-in.o): relocation R_X86_64_32S against `.text' can not be used when making a shared object; recompile w +ith -fPIC /usr/bin/ld: final link failed: Nonrepresentable section on output collect2: error: ld returned 1 exit status make[2]: *** [Makefile.perf:507: perf] Error 1 make[1]: *** [Makefile.perf:210: sub-make] Error 2 make: *** [Makefile:69: all] Error 2 Mainly it's caused by perl/python objects being compiled with: -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 which prevent the final link impossible, because it will check for 'proper' objects with following option: -specs=/usr/lib/rpm/redhat/redhat-hardened-ld Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20171204082437.GC30564@krava Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools/perf/jvmti is broken in so far as it generates incorrect debug
information. Specifically it attributes all debug lines to the original
method being output even in the case that some code is being inlined
from elsewhere. This patch fixes the issue.
To test (from within linux/tools/perf):
export JDIR=/usr/lib/jvm/java-8-openjdk-amd64/
make
cat << __EOF > Test.java
public class Test
{
private StringBuilder b = new StringBuilder();
private void loop(int i, String... args)
{
for (String a : args)
b.append(a);
long hc = b.hashCode() * System.nanoTime();
b = new StringBuilder();
b.append(hc);
System.out.printf("Iteration %d = %d\n", i, hc);
}
public void run(String... args)
{
for (int i = 0; i < 10000; ++i)
{
loop(i, args);
}
}
public static void main(String... args)
{
Test t = new Test();
t.run(args);
}
}
__EOF
$JDIR/bin/javac Test.java
./perf record -F 10000 -g -k mono $JDIR/bin/java -agentpath:`pwd`/libperf-jvmti.so Test
./perf inject --jit -i perf.data -o perf.data.jitted
./perf annotate -i perf.data.jitted --stdio | grep Test\.java: | sort -u
Before this patch, Test.java line numbers get reported that are greater
than the number of lines in the Test.java file. They come from the
source file of the inlined function, e.g. java/lang/String.java:1085.
For further validation one can examine those lines in the JDK source
distribution and confirm that they map to inlined functions called by
Test.java.
After this patch, the filename of the inlined function is output
rather than the incorrect original source filename.
Signed-off-by: Ben Gainey <ben.gainey@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Colin King <colin.king@canonical.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 598b7c6 ("perf jit: add source line info support")
Link: http://lkml.kernel.org/r/20171122182541.d25599a3eb1ada3480d142fa@arm.com
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Long ago we decided to be verbotten including files in the kernel git sources from tools/ living source code, to avoid disturbing kernel development (and perf's and other tools/) when, say, a kernel hacker adds something, tests everything but tools/ and have tools/ build broken. This got broken recently by s/390, fix it by copying arch/s390/include/uapi/asm/perf_regs.h to tools/arch/s390/include/uapi/asm/, making this one be used by means of <asm/perf_regs.h> and updating tools/perf/check_headers.sh to make sure we are notified when the original changes, so that we can check if anything is needed on the tooling side. This would have been caught by the 'tarkpg' test entry in: $ make -C tools/perf build-test When run on a s/390 build system or container. Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: f704ef4 ("s390/perf: add support for perf_regs and libdw") Link: https://lkml.kernel.org/n/tip-n57139ic0v9uffx8wdqi3d8a@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
…rget Up to f5caf62 ("x86/asm: Fix inline asm call constraints for Clang") we were able to use x86 headers to build to the 'bpf' clang target, as done by the BPF code in tools/perf/. With that commit, we ended up with following failure for 'perf test LLVM', this is because "clang ... -target bpf ..." fails since 4.0 does not have bpf inline asm support and 6.0 does not recognize the register 'esp', fix it by guarding that part with an #ifndef __BPF__, that is defined by clang when building to the "bpf" target. # perf test -v LLVM 37: LLVM search and compile : 37.1: Basic BPF llvm compile : --- start --- test child forked, pid 25526 Kernel build dir is set to /lib/modules/4.14.0+/build set env: KBUILD_DIR=/lib/modules/4.14.0+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40e00 set env: CLANG_EXEC=/usr/local/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.14.0+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=SyS_epoll_wait") int bpf_func__SyS_epoll_wait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- LLVM search and compile subtest 0: Ok 37.2: kbuild searching : --- start --- test child forked, pid 25950 Kernel build dir is set to /lib/modules/4.14.0+/build set env: KBUILD_DIR=/lib/modules/4.14.0+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40e00 set env: CLANG_EXEC=/usr/local/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.14.0+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-test-kbuild.c * Test include from kernel header */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define SEC(NAME) __attribute__((section(NAME), used)) #include <uapi/linux/fs.h> #include <uapi/asm/ptrace.h> SEC("func=vfs_llseek") int bpf_func__vfs_llseek(void *ctx) { return 0; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - In file included from <stdin>:12: In file included from /home/acme/git/linux/arch/x86/include/uapi/asm/ptrace.h:5: In file included from /home/acme/git/linux/include/linux/compiler.h:242: In file included from /home/acme/git/linux/arch/x86/include/asm/barrier.h:5: In file included from /home/acme/git/linux/arch/x86/include/asm/alternative.h:10: /home/acme/git/linux/arch/x86/include/asm/asm.h:145:50: error: unknown register name 'esp' in asm register unsigned long current_stack_pointer asm(_ASM_SP); ^ /home/acme/git/linux/arch/x86/include/asm/asm.h:44:18: note: expanded from macro '_ASM_SP' #define _ASM_SP __ASM_REG(sp) ^ /home/acme/git/linux/arch/x86/include/asm/asm.h:27:32: note: expanded from macro '__ASM_REG' #define __ASM_REG(reg) __ASM_SEL_RAW(e##reg, r##reg) ^ /home/acme/git/linux/arch/x86/include/asm/asm.h:18:29: note: expanded from macro '__ASM_SEL_RAW' # define __ASM_SEL_RAW(a,b) __ASM_FORM_RAW(a) ^ /home/acme/git/linux/arch/x86/include/asm/asm.h:11:32: note: expanded from macro '__ASM_FORM_RAW' # define __ASM_FORM_RAW(x) #x ^ <scratch space>:4:1: note: expanded from here "esp" ^ 1 error generated. ERROR: unable to compile - Hint: Check error message shown above. Hint: You can also pre-compile it into .o using: clang -target bpf -O2 -c - with proper -I and -D options. Failed to compile test case: 'kbuild searching' test child finished with -1 ---- end ---- LLVM search and compile subtest 1: FAILED! Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wang Nan <wangnan0@huawei.com> Cc: Yonghong Song <yhs@fb.com> Link: https://lkml.kernel.org/r/20171128175948.GL3298@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
…rg/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix up build in hardened environments, such as fedora 27 (Jiri Olsa) - Do not include header files from the kernel sources for the s/390 arch, fixing the detached tarball building (Arnaldo Carvalho de Melo) - Allow again using asm.h when building for the 'bpf' clang target, guarding x86 specific bits under ifndef __BPF__ (Arnaldo Carvalho de Melo) - Generate correct debug information for inlined code when generating ELF images for JITted java programs (Ben Gainey) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
As it turned out device_get() doesn't use kref_get_unless_zero(), so we will be always getting a device pointer. Consequently, we need to check for the device state in __scsi_remove_target() to avoid tripping over deleted objects. Fixes: fbce4d9 ("scsi: fixup kernel warning during rmmod()") Reported-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit: 1959a60 ("x86/dumpstack: Pin the target stack when dumping it") changed the behavior of stack traces for zombies. Before that commit, /proc/<pid>/stack reported the last execution path of the zombie before it died: [<ffffffff8105b877>] do_exit+0x6f7/0xa80 [<ffffffff8105bc79>] do_group_exit+0x39/0xa0 [<ffffffff8105bcf0>] __wake_up_parent+0x0/0x30 [<ffffffff8152dd09>] system_call_fastpath+0x16/0x1b [<00007fd128f9c4f9>] 0x7fd128f9c4f9 [<ffffffffffffffff>] 0xffffffffffffffff After the commit, it just reports an empty stack trace. The new behavior is actually probably more correct. If the stack refcount has gone down to zero, then the task has already gone through do_exit() and isn't going to run anymore. The stack could be freed at any time and is basically gone, so reporting an empty stack makes sense. However, save_stack_trace_tsk_reliable() treats such a missing stack condition as an error. That can cause livepatch transition stalls if there are any unreaped zombies. Instead, just treat it as a reliable, empty stack. Reported-and-tested-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Fixes: af085d9 ("stacktrace/x86: add function for detecting reliable stack traces") Link: http://lkml.kernel.org/r/e4b09e630e99d0c1080528f0821fc9d9dbaeea82.1513631620.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
The timer wheel bases are not (re)initialized on CPU hotplug. That leaves them with a potentially stale clk and next_expiry valuem, which can cause trouble then the CPU is plugged. Add a prepare callback which forwards the clock, sets next_expiry to far in the future and reset the control flags to a known state. Set base->must_forward_clk so the first timer which is queued will try to forward the clock to current jiffies. Fixes: 500462a ("timers: Switch to a non-cascading wheel") Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712272152200.2431@nanos
The conditions in irq_exit() to invoke tick_nohz_irq_exit() which subsequently invokes tick_nohz_stop_sched_tick() are: if ((idle_cpu(cpu) && !need_resched()) || tick_nohz_full_cpu(cpu)) If need_resched() is not set, but a timer softirq is pending then this is an indication that the softirq code punted and delegated the execution to softirqd. need_resched() is not true because the current interrupted task takes precedence over softirqd. Invoking tick_nohz_irq_exit() in this case can cause an endless loop of timer interrupts because the timer wheel contains an expired timer, but softirqs are not yet executed. So it returns an immediate expiry request, which causes the timer to fire immediately again. Lather, rinse and repeat.... Prevent that by adding a check for a pending timer soft interrupt to the conditions in tick_nohz_stop_sched_tick() which avoid calling get_next_timer_interrupt(). That keeps the tick sched timer on the tick and prevents a repetitive programming of an already expired timer. Reported-by: Sebastian Siewior <bigeasy@linutronix.d> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712272156050.2431@nanos
The timer start debug function is called before the proper timer base is set. As a consequence the trace data contains the stale CPU and flags values. Call the debug function after setting the new base and flags. Fixes: 500462a ("timers: Switch to a non-cascading wheel") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org Cc: rt@linutronix.de Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Link: https://lkml.kernel.org/r/20171222145337.792907137@linutronix.de
The return values of timerqueue_add/del() are not documented in the kernel doc comment. Add proper documentation. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: rt@linutronix.de Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Link: https://lkml.kernel.org/r/20171222145337.872681338@linutronix.de
It appears that hardened gentoo enables "-fstack-check" by default for gcc. That doesn't work _at_all_ for the kernel, because the kernel stack doesn't act like a user stack at all: it's much smaller, and it doesn't auto-expand on use. So the extra "probe one page below the stack" code generated by -fstack-check just breaks the kernel in horrible ways, causing infinite double faults etc. [ I have to say, that the particular code gcc generates looks very stupid even for user space where it works, but that's a separate issue. ] Reported-and-tested-by: Alexander Tsoy <alexander@tsoy.me> Reported-and-tested-by: Toralf Förster <toralf.foerster@gmx.de> Cc: stable@kernel.org Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
…/git/jikos/hid Pull HID fixes from Jiri Kosina: - two cosmetic fixes from Daniel Axtens and Hans de Goede - fix for I2C command mismatch fix for cp2112 driver from Eudean Sun * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: core: lower log level for unknown main item tags to warnings HID: holtekff: move MODULE_* parameters out of #ifdef block HID: cp2112: Fix I2C_BLOCK_DATA transactions
Fix a seg fault when no parameter is provided to 'objtool orc'. Signed-off-by: Simon Ser <contact@emersion.fr> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/9172803ec7ebb72535bcd0b7f966ae96d515968e.1514666459.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix a seg fault which happens when an input file provided to 'objtool orc generate' doesn't have a '.shstrtab' section (for instance, object files produced by clang don't have this section). Signed-off-by: Simon Ser <contact@emersion.fr> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/c0f2231683e9bed40fac1f13ce2c33b8389854bc.1514666459.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
…it/jejb/scsi Pull SCSI fixes from James Bottomley: "Two simple fixes, both of which cause I/O hangs. The storvsc one is from the hyper-v which can hang under certain hot add/remove conditions and the other is generally, where removing a target and a device in close proximity can result in the release method being executed twice (and subsequent list and other corruption and an eventual panic)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: storvsc: Fix scsi_cmd error assignments in storvsc_handle_error scsi: core: check for device state in __scsi_remove_target()
smpboot_setup_warm_reset_vector() and smpboot_restore_warm_reset_vector() invoke local_flush_tlb() for no obvious reason. Digging in history revealed that the original code in the 2.1 era added those because the code manipulated a swapper_pg_dir pagetable entry. The pagetable manipulation was removed long ago in the 2.3 timeframe, but the TLB flush invocations stayed around forever. Remove them along with the pointless pr_debug()s which come from the same 2.1 change. Reported-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Torvalds <torvalds@linuxfoundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20171230211829.586548655@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
The preempt_disable/enable() pair in __native_flush_tlb() was added in commit: 5cf0791 ("x86/mm: Disable preemption during CR3 read+write") ... to protect the UP variant of flush_tlb_mm_range(). That preempt_disable/enable() pair should have been added to the UP variant of flush_tlb_mm_range() instead. The UP variant was removed with commit: ce4a4e5 ("x86/mm: Remove the UP asm/tlbflush.h code, always use the (formerly) SMP code") ... but the preempt_disable/enable() pair stayed around. The latest change to __native_flush_tlb() in commit: 6fd166a ("x86/mm: Use/Fix PCID to optimize user/kernel switches") ... added an access to a per CPU variable outside the preempt disabled regions, which makes no sense at all. __native_flush_tlb() must always be called with at least preemption disabled. Remove the preempt_disable/enable() pair and add a WARN_ON_ONCE() to catch bad callers independent of the smp_processor_id() debugging. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Torvalds <torvalds@linuxfoundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20171230211829.679325424@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
The error path in write_ldt() tries to free 'old_ldt' instead of the newly allocated 'new_ldt', resulting in a memory leak. It also misses to clean up a half populated LDT pagetable, which is not a leak as it gets cleaned up when the process exits. Free both the potentially half populated LDT pagetable and the newly allocated LDT struct. This can be done unconditionally because once an LDT is mapped subsequent maps will succeed, because the PTE page is already populated and the two LDTs fit into that single page. Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Torvalds <torvalds@linuxfoundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: f55f050 ("x86/pti: Put the LDT in its own PGD if PTI is on") Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1712311121340.1899@nanos Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy prefers to be paranoid about the pagetable free in the error path of write_ldt(). Make it conditional and warn whenever the installment of a secondary LDT fails. Requested-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull sparc bugfix from David Miller. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: repair calling incorrect hweight function from stubs
The blackfin architecture has seen no maintainer action of any kind since April 2015. No new code, no pull requests, no acks to patches, no response to mails, nothing. The web site has an expired certificate (expiration Sep 2017, issued in 2013), the mailing list sees no answers either, with one exception: https://sourceforge.net/p/adi-buildroot/mailman/adi-buildroot-devel/ > > Steven is no longer working on this for ADI. Acked by me if this works. Thanks. > > Best regards, > Aaron Wu > Analog Devices Inc. But, Aaron doesn't seem to respond to queries either. Signed-off-by: Adam Borowski <kilobyte@angband.pl> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
…/git/gregkh/usb Pull USB/PHY fixes from Greg KH: "Here are a number of small USB and PHY driver fixes for 4.15-rc6. Nothing major, but there are a number of regression fixes in here that resolve issues that have been reported a bunch. There are also the usual xhci fixes as well as a number of new usb serial device ids. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201 xhci: Fix use-after-free in xhci debugfs xhci: Fix xhci debugfs NULL pointer dereference in resume from hibernate USB: serial: ftdi_sio: add id for Airbus DS P8GR usb: Add device quirk for Logitech HD Pro Webcam C925e usb: add RESET_RESUME for ELSA MicroLink 56K usbip: fix usbip bind writing random string after command in match_busid usbip: stub_rx: fix static checker warning on unnecessary checks usbip: prevent leaking socket pointer address in messages usbip: stub: stop printing kernel pointer addresses in messages usbip: vhci: stop printing kernel pointer addresses in messages USB: Fix off by one in type-specific length check of BOS SSP capability USB: serial: option: adding support for YUGA CLM920-NC5 phy: rcar-gen3-usb2: select USB_COMMON phy: rockchip-typec: add pm_runtime_disable in err case phy: cpcap-usb: Fix platform_get_irq_byname's error checking. phy: tegra: fix device-tree node lookups USB: serial: qcserial: add Sierra Wireless EM7565 USB: serial: option: add support for Telit ME910 PID 0x1101 USB: chipidea: msm: fix ulpi-node lookup
…/git/gregkh/tty Pull TTY fix from Greg KH: "Here is a single tty fix for a reported issue that you wrote the patch for :) It's been in linux-next for a week or so with no reported issues" * tag 'tty-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: n_tty: fix EXTPROC vs ICANON interaction with TIOCINQ (aka FIONREAD)
…rnel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are three staging driver fixes for 4.15-rc6 The first resolves a bug in the lustre driver that came about due to a broken cleanup patch, due to crazy list usage in that codebase. The remaining two are ion driver fixes, finally getting the CMA interaction to work properly, resolving two regressions in that area of the code. All have been in linux-next with no reported issues for a while" * tag 'staging-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: android: ion: Fix dma direction for dma_sync_sg_for_cpu/device staging: ion: Fix ion_cma_heap allocations staging: lustre: lnet: Fix recent breakage from list_for_each conversion
…x/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are two driver core fixes for 4.15-rc6, resolving some reported issues. The first is a cacheinfo fix for DT based systems to resolve a reported issue that has been around for a while, and the other is to resolve a regression in the kobject uevent code that showed up in 4.15-rc1. Both have been in linux-next for a while with no reported issues" * tag 'driver-core-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kobject: fix suppressing modalias in uevents delivered over netlink drivers: base: cacheinfo: fix cache type for non-architected system cache
…kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are six small fixes of some of the char/misc drivers that have been sent in to resolve reported issues. Nothing major, a binder use-after-free fix, some thunderbolt bugfixes, a hyper-v bugfix, and an nvmem driver fix. All of these have been in linux-next with no reported issues for a while" * tag 'char-misc-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: nvmem: meson-mx-efuse: fix reading from an offset other than 0 binder: fix proc->files use-after-free vmbus: unregister device_obj->channels_kset thunderbolt: Mask ring interrupt properly when polling starts MAINTAINERS: Add thunderbolt.rst to the Thunderbolt driver entry thunderbolt: Make pathname to force_power shorter
…linux/kernel/git/tip/tip
Pull objtool fixes from Thomas Gleixner:
"Three fixlets for objtool:
- Address two segfaults related to missing parameter and clang
objects
- Make it compile clean with clang"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix seg fault with clang-compiled objects
objtool: Fix seg fault caused by missing parameter
objtool: Fix Clang enum conversion warning
…inux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A rather large update after the kaisered maintainer finally found time
to handle regression reports.
- The larger part addresses a regression caused by the x86 vector
management rework.
The reservation based model does not work reliably for MSI
interrupts, if they cannot be masked (yes, yet another hw
engineering trainwreck). The reason is that the reservation mode
assigns a dummy vector when the interrupt is allocated and switches
to a real vector when the interrupt is requested.
If the MSI entry cannot be masked then the initialization might
raise an interrupt before the interrupt is requested, which ends up
as spurious interrupt and causes device malfunction and worse. The
fix is to exclude MSI interrupts which do not support masking from
reservation mode and assign a real vector right away.
- Extend the extra lockdep class setup for nested interrupts with a
class for the recently added irq_desc::request_mutex so lockdep can
differeniate and does not emit false positive warnings.
- A ratelimit guard for the bad irq printout so in case a bad irq
comes back immediately the system does not drown in dmesg spam"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi, x86/vector: Prevent reservation mode for non maskable MSI
genirq/irqdomain: Rename early argument of irq_domain_activate_irq()
x86/vector: Use IRQD_CAN_RESERVE flag
genirq: Introduce IRQD_CAN_RESERVE flag
genirq/msi: Handle reactivation only on success
gpio: brcmstb: Make really use of the new lockdep class
genirq: Guard handle_bad_irq log messages
kernel/irq: Extend lockdep class for request mutex
…linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: - plug a memory leak in the intel pmu init code - clang fixes - tooling fix to avoid including kernel headers - a fix for jvmti to generate correct debug information for inlined code - replace backtick with a regular shell function - fix the build in hardened environments * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Plug memory leak in intel_pmu_init() x86/asm: Allow again using asm.h when building for the 'bpf' clang target tools arch s390: Do not include header files from the kernel sources perf jvmti: Generate correct debug information for inlined code perf tools: Fix up build in hardened environments perf tools: Use shell function for perl cflags retrieval
…/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "Three patches addressing the fallout of the CPU_ISOLATION changes especially with NO_HZ_FULL plus documentation of boot parameter dependency" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/isolation: Document boot parameters dependency on CONFIG_CPU_ISOLATION=y sched/isolation: Enable CONFIG_CPU_ISOLATION=y by default sched/isolation: Make CONFIG_NO_HZ_FULL select CONFIG_CPU_ISOLATION
…inux/kernel/git/tip/tip Pull smp fixlet from Thomas Gleixner: "A trivial build warning fix for newer compilers" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Move inline keyword at the beginning of declaration
…m/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A pile of fixes for long standing issues with the timer wheel and the
NOHZ code:
- Prevent timer base confusion accross the nohz switch, which can
cause unlocked access and data corruption
- Reinitialize the stale base clock on cpu hotplug to prevent subtle
side effects including rollovers on 32bit
- Prevent an interrupt storm when the timer softirq is already
pending caused by tick_nohz_stop_sched_tick()
- Move the timer start tracepoint to a place where it actually makes
sense
- Add documentation to timerqueue functions as they caused confusion
several times now"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timerqueue: Document return values of timerqueue_add/del()
timers: Invoke timer_start_debug() where it makes sense
nohz: Prevent a timer interrupt storm in tick_nohz_stop_sched_tick()
timers: Reinitialize per cpu bases on hotplug
timers: Use deferrable base independent of base::nohz_active
…x/kernel/git/tip/tip
Pull x86 page table isolation fixes from Thomas Gleixner:
"Four patches addressing the PTI fallout as discussed and debugged
yesterday:
- Remove stale and pointless TLB flush invocations from the hotplug
code
- Remove stale preempt_disable/enable from __native_flush_tlb()
- Plug the memory leak in the write_ldt() error path"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ldt: Make LDT pgtable free conditional
x86/ldt: Plug memory leak in error path
x86/mm: Remove preempt_disable/enable() from __native_flush_tlb()
x86/smpboot: Remove stale TLB flush invocations
…l/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A couple of fixlets for x86:
- Fix the ESPFIX double fault handling for 5-level pagetables
- Fix the commandline parsing for 'apic=' on 32bit systems and update
documentation
- Make zombie stack traces reliable
- Fix kexec with stack canary
- Fix the delivery mode for APICs which was missed when the x86
vector management was converted to single target delivery. Caused a
regression due to the broken hardware which ignores affinity
settings in lowest prio delivery mode.
- Unbreak modules when AMD memory encryption is enabled
- Remove an unused parameter of prepare_switch_to"
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Switch all APICs to Fixed delivery mode
x86/apic: Update the 'apic=' description of setting APIC driver
x86/apic: Avoid wrong warning when parsing 'apic=' in X86-32 case
x86-32: Fix kexec with stack canary (CONFIG_CC_STACKPROTECTOR)
x86: Remove unused parameter of prepare_switch_to
x86/stacktrace: Make zombie stack traces reliable
x86/mm: Unbreak modules that use the DMA API
x86/build: Make isoimage work on Debian
x86/espfix/64: Fix espfix double-fault handling on 5-level systems
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.