📦️ Update prebuilt binaries and config

ciotto · Jan 15, 2024 · fca6044 · fca6044
1 parent 156e04b
commit fca6044
Show file tree

Hide file tree

Showing 41 changed files with 21 additions and 21 deletions.
diff --git a/Copy to SD Card root directory to update/BIGTREE_GD_TFT24_V1.1.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_GD_TFT24_V1.1.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_GD_TFT35_V2.0.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_GD_TFT35_V2.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_GD_TFT35_V3.0.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_GD_TFT35_V3.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_GD_TFT35_V3.0_B1.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_GD_TFT35_V3.0_B1.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_GD_TFT35_V3.0_E3.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_GD_TFT35_V3.0_E3.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_GD_TFT43_V3.0.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_GD_TFT43_V3.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_GD_TFT50_V3.0.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_GD_TFT50_V3.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_GD_TFT70_V3.0.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_GD_TFT70_V3.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_TFT24_V1.1.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_TFT24_V1.1.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_TFT28_V3.0.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_TFT28_V3.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_TFT35_V3.0.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_TFT35_V3.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_TFT35_V3.0_B1.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_TFT35_V3.0_B1.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_TFT35_V3.0_E3.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_TFT35_V3.0_E3.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_TFT43_V3.0.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_TFT43_V3.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_TFT50_V3.0.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_TFT50_V3.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIGTREE_TFT70_V3.0.27.x.bin b/Copy to SD Card root directory to update/BIGTREE_TFT70_V3.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIQU_TFT28_V1.0.27.x.bin b/Copy to SD Card root directory to update/BIQU_TFT28_V1.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIQU_TFT35_APP1_V2.0.27.x.bin b/Copy to SD Card root directory to update/BIQU_TFT35_APP1_V2.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIQU_TFT35_V1.0.27.x.bin b/Copy to SD Card root directory to update/BIQU_TFT35_V1.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIQU_TFT35_V1.1.27.x.bin b/Copy to SD Card root directory to update/BIQU_TFT35_V1.1.27.x.bin
diff --git a/Copy to SD Card root directory to update/BIQU_TFT35_V1.2.27.x.bin b/Copy to SD Card root directory to update/BIQU_TFT35_V1.2.27.x.bin
diff --git a/Copy to SD Card root directory to update/Language Packs/language_am.ini b/Copy to SD Card root directory to update/Language Packs/language_am.ini
@@ -308,7 +308,7 @@ label_tune_start_info:Autotune may take some time to complete.\nContinue?
 label_tune_extruder:Tune steps
 label_tune_ext_extrude_100:Ext. 100mm
 label_tune_ext_temp:Extruder tuning | Heat
-label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
+label_tune_ext_mark120mm:Mark 120 mm on your filament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
 label_tune_ext_adj_esteps:Adjust E-Steps
 label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
 label_tune_ext_measured:Length remaining:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_ca.ini b/Copy to SD Card root directory to update/Language Packs/language_ca.ini
@@ -308,7 +308,7 @@ label_tune_start_info:Autotune may take some time to complete.\nContinue?
 label_tune_extruder:Tune steps
 label_tune_ext_extrude_100:Ext. 100mm
 label_tune_ext_temp:Extruder tuning | Heat
-label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
+label_tune_ext_mark120mm:Mark 120 mm on your filament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
 label_tune_ext_adj_esteps:Adjust E-Steps
 label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
 label_tune_ext_measured:Length remaining:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_en.ini b/Copy to SD Card root directory to update/Language Packs/language_en.ini
@@ -308,7 +308,7 @@ label_tune_start_info:Autotune may take some time to complete.\nContinue?
 label_tune_extruder:Tune steps
 label_tune_ext_extrude_100:Ext. 100mm
 label_tune_ext_temp:Extruder tuning | Heat
-label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
+label_tune_ext_mark120mm:Mark 120 mm on your filament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
 label_tune_ext_adj_esteps:Adjust E-Steps
 label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
 label_tune_ext_measured:Length remaining:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_es.ini b/Copy to SD Card root directory to update/Language Packs/language_es.ini
@@ -308,7 +308,7 @@ label_tune_start_info:Autotune may take some time to complete.\nContinue?
 label_tune_extruder:Tune steps
 label_tune_ext_extrude_100:Ext. 100mm
 label_tune_ext_temp:Extruder tuning | Heat
-label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
+label_tune_ext_mark120mm:Mark 120 mm on your filament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
 label_tune_ext_adj_esteps:Adjust E-Steps
 label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
 label_tune_ext_measured:Length remaining:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_gr.ini b/Copy to SD Card root directory to update/Language Packs/language_gr.ini
@@ -308,7 +308,7 @@ label_tune_start_info:Autotune may take some time to complete.\nContinue?
 label_tune_extruder:Tune steps
 label_tune_ext_extrude_100:Ext. 100mm
 label_tune_ext_temp:Extruder tuning | Heat
-label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
+label_tune_ext_mark120mm:Mark 120 mm on your filament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
 label_tune_ext_adj_esteps:Adjust E-Steps
 label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
 label_tune_ext_measured:Length remaining:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_jp.ini b/Copy to SD Card root directory to update/Language Packs/language_jp.ini
@@ -308,7 +308,7 @@ label_tune_start_info:Autotune may take some time to complete.\nContinue?
 label_tune_extruder:Tune steps
 label_tune_ext_extrude_100:Ext. 100mm
 label_tune_ext_temp:Extruder tuning | Heat
-label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
+label_tune_ext_mark120mm:Mark 120 mm on your filament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
 label_tune_ext_adj_esteps:Adjust E-Steps
 label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
 label_tune_ext_measured:Length remaining:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_nl.ini b/Copy to SD Card root directory to update/Language Packs/language_nl.ini
@@ -308,7 +308,7 @@ label_tune_start_info:Autotune zal starten. Dit kan een paar minuten duren.\nDoo
 label_tune_extruder:Tune steps
 label_tune_ext_extrude_100:Ext. 100mm
 label_tune_ext_temp:Extruder tuning | Heat
-label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
+label_tune_ext_mark120mm:Mark 120 mm on your filament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
 label_tune_ext_adj_esteps:Adjust E-Steps
 label_tune_ext_esteps_saved:New E-steps applied. Don't forget to save it in EEPROM.\nNew value: %0.2f
 label_tune_ext_measured:Length remaining:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_pt.ini b/Copy to SD Card root directory to update/Language Packs/language_pt.ini
@@ -308,7 +308,7 @@ label_tune_start_info:Autotune may take some time to complete.\nContinue?
 label_tune_extruder:Tune steps
 label_tune_ext_extrude_100:Ext. 100mm
 label_tune_ext_temp:Extruder tuning | Heat
-label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
+label_tune_ext_mark120mm:Mark 120 mm on your filament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
 label_tune_ext_adj_esteps:Adjust E-Steps
 label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
 label_tune_ext_measured:Length remaining:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_sk.ini b/Copy to SD Card root directory to update/Language Packs/language_sk.ini
@@ -308,7 +308,7 @@ label_tune_start_info:Autotune may take some time to complete.\nContinue?
 label_tune_extruder:Tune steps
 label_tune_ext_extrude_100:Ext. 100mm
 label_tune_ext_temp:Extruder tuning | Heat
-label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
+label_tune_ext_mark120mm:Mark 120 mm on your filament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
 label_tune_ext_adj_esteps:Adjust E-Steps
 label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
 label_tune_ext_measured:Length remaining:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_sl.ini b/Copy to SD Card root directory to update/Language Packs/language_sl.ini
@@ -308,7 +308,7 @@ label_tune_start_info:Autotune may take some time to complete.\nContinue?
 label_tune_extruder:Tune steps
 label_tune_ext_extrude_100:Ext. 100mm
 label_tune_ext_temp:Extruder tuning | Heat
-label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
+label_tune_ext_mark120mm:Mark 120 mm on your filament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
 label_tune_ext_adj_esteps:Adjust E-Steps
 label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
 label_tune_ext_measured:Length remaining:

diff --git a/Copy to SD Card root directory to update/Language Packs/language_tc.ini b/Copy to SD Card root directory to update/Language Packs/language_tc.ini
@@ -308,7 +308,7 @@ label_tune_start_info:开始自动整定,需要几分钟来完成,是否继续?
 label_tune_extruder:Tune steps
 label_tune_ext_extrude_100:挤出100mm
 label_tune_ext_temp:Extruder tuning | Heat
-label_tune_ext_mark120mm:Mark 120 mm on your fillament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
+label_tune_ext_mark120mm:Mark 120 mm on your filament.\nPress '%s' when ready.\nMeasure remaining length after extruding.
 label_tune_ext_adj_esteps:Adjust E-Steps
 label_tune_ext_esteps_saved:New E-steps applied.\nDon't forget to save it in EEPROM.\nNew value: %0.2f
 label_tune_ext_measured:Length remaining:

diff --git a/Copy to SD Card root directory to update/MKS_TFT28_NEW_GENIUS.27.x.bin b/Copy to SD Card root directory to update/MKS_TFT28_NEW_GENIUS.27.x.bin
diff --git a/Copy to SD Card root directory to update/MKS_TFT28_V3.0.27.x.bin b/Copy to SD Card root directory to update/MKS_TFT28_V3.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/MKS_TFT28_V4.0.27.x.bin b/Copy to SD Card root directory to update/MKS_TFT28_V4.0.27.x.bin
diff --git a/Copy to SD Card root directory to update/MKS_TFT32L_V3_0.27.x.bin b/Copy to SD Card root directory to update/MKS_TFT32L_V3_0.27.x.bin
diff --git a/Copy to SD Card root directory to update/MKS_TFT32_V1.3.27.x.bin b/Copy to SD Card root directory to update/MKS_TFT32_V1.3.27.x.bin
diff --git a/Copy to SD Card root directory to update/MKS_TFT32_V1.4.27.x.bin b/Copy to SD Card root directory to update/MKS_TFT32_V1.4.27.x.bin
diff --git a/Copy to SD Card root directory to update/MKS_TFT35_V1_0.27.x.bin b/Copy to SD Card root directory to update/MKS_TFT35_V1_0.27.x.bin
diff --git a/Copy to SD Card root directory to update/config.ini b/Copy to SD Card root directory to update/config.ini
@@ -657,15 +657,15 @@ inverted_axis:X0 Y0 Z0 LY0
 # is moved to the XY probing point.
 # If disabled, after homing the nozzle is moved directly to the XY homing point. This is useful
 # in case Marlin firmware is configured to use the probe for Z axis homing (e.g.
-# USE_PROBE_FOR_Z_HOMING enabled in Marlin firmware) to avoid a second probing after homing.
+# "USE_PROBE_FOR_Z_HOMING" enabled in Marlin firmware) to avoid a second probing after homing.
 #
 # NOTES:
 #   - Enable it in case Marlin firmware is not configured to use the probe for Z axis homing
-#     (e.g. USE_PROBE_FOR_Z_HOMING disabled in Marlin firmware) or the XY probing point set
+#     (e.g. "USE_PROBE_FOR_Z_HOMING" disabled in Marlin firmware) or the XY probing point set
 #     for homing is not reachable by the nozzle (e.g. due to HW limitations/constraints or
 #     printer specific configuration).
 #   - Disable it (preferably) in case Marlin firmware is configured to use the probe for Z axis
-#     homing (e.g. USE_PROBE_FOR_Z_HOMING enabled in Marlin firmware).
+#     homing (e.g. "USE_PROBE_FOR_Z_HOMING" enabled in Marlin firmware).
 #
 #   Options: [disable: 0, enable: 1]
 probing_z_offset:1
@@ -685,7 +685,7 @@ probing_z_raise:20.0
 #### Z Steppers Auto-Alignment (ABL)
 # It allows to align multiple Z stepper motors using a bed probe by probing one position per stepper.
 # Enable this setting to show an icon in ABL menu allowing to run G34 command (it requires
-# Z_STEPPER_AUTO_ALIGN enabled in Configuration_adv.h in Marlin firmware).
+# "Z_STEPPER_AUTO_ALIGN" enabled in Configuration_adv.h in Marlin firmware).
 #
 # NOTE: Only for Marlin printers with one stepper driver per Z stepper motor and no Z timing belt.
 #
@@ -834,7 +834,7 @@ btt_mini_ups:0
 #
 # NOTE: Error messages from printer will always play the error sound.
 #
-# Parameters:
+# Settings:
 #   touch_sound:  Enable/disable this to control touch feedback sound.
 #   toast_sound:  Enable/disable this to control all toast notification sounds.
 #   alert_sound:  Enable/disable this to control all popup and alert sounds

diff --git a/Copy to SD Card root directory to update/config_rrf.ini b/Copy to SD Card root directory to update/config_rrf.ini
@@ -620,15 +620,15 @@ inverted_axis:X0 Y0 Z0 LY0
 # is moved to the XY probing point.
 # If disabled, after homing the nozzle is moved directly to the XY homing point. This is useful
 # in case Marlin firmware is configured to use the probe for Z axis homing (e.g.
-# USE_PROBE_FOR_Z_HOMING enabled in Marlin firmware) to avoid a second probing after homing.
+# "USE_PROBE_FOR_Z_HOMING" enabled in Marlin firmware) to avoid a second probing after homing.
 #
 # NOTES:
 #   - Enable it in case Marlin firmware is not configured to use the probe for Z axis homing
-#     (e.g. USE_PROBE_FOR_Z_HOMING disabled in Marlin firmware) or the XY probing point set
+#     (e.g. "USE_PROBE_FOR_Z_HOMING" disabled in Marlin firmware) or the XY probing point set
 #     for homing is not reachable by the nozzle (e.g. due to HW limitations/constraints or
 #     printer specific configuration).
 #   - Disable it (preferably) in case Marlin firmware is configured to use the probe for Z axis
-#     homing (e.g. USE_PROBE_FOR_Z_HOMING enabled in Marlin firmware).
+#     homing (e.g. "USE_PROBE_FOR_Z_HOMING" enabled in Marlin firmware).
 #
 #   Options: [disable: 0, enable: 1]
 probing_z_offset:1
@@ -648,7 +648,7 @@ probing_z_raise:20.0
 #### Z Steppers Auto-Alignment (ABL)
 # It allows to align multiple Z stepper motors using a bed probe by probing one position per stepper.
 # Enable this setting to show an icon in ABL menu allowing to run G34 command (it requires
-# Z_STEPPER_AUTO_ALIGN enabled in Configuration_adv.h in Marlin firmware).
+# "Z_STEPPER_AUTO_ALIGN" enabled in Configuration_adv.h in Marlin firmware).
 #
 # NOTE: Only for Marlin printers with one stepper driver per Z stepper motor and no Z timing belt.
 #
@@ -695,7 +695,7 @@ preheat_temp_6:T250 B90
 #
 # NOTE: Error messages from printer will always play the error sound.
 #
-# Parameters:
+# Settings:
 #   touch_sound:  Enable/disable this to control touch feedback sound.
 #   toast_sound:  Enable/disable this to control all toast notification sounds.
 #   alert_sound:  Enable/disable this to control all popup and alert sounds