NOTE: Version 2.x of the circonus-agent uses a new check type in order to support the new dynamic host dashboards. It will create a new check if it is installed over any prior version of the circonus-agent or NAD.
- Builtin metric collectors -- the default Linux builtins emit the common metrics needed for the dynamic host dashboard
- Plugin architecture for local metric collection
- Local HTTP Receiver for POST/PUT metric collection
- Local StatsD listener for application metrics
- Prometheus format support
- Receive HTTP
PUT|POST
to/prom
endpoint (e.g.PUT http://127.0.0.1:2609/prom
) - Fetch (see Prometheus collector for details)
- Extract HTTP
GET
of/prom
endpoint will emit metrics in Prometheus format (e.g.GET http://127.0.0.1:2609/prom
)
- Receive HTTP
- Binary only releases pre-built binaries for various platforms
- RPM and DEB packages for manual installations with plugins included
- Docker images
mkdir -p /opt/circonus/agent
- Download latest release from repository or RPM/DEB/TGZ package
- Extract archive into
/opt/circonus/agent
or manually install os package - Create a config or use command line parameters
- Optionally, modify and install a service configuration
- Create a directory (e.g.
md C:\agent
) - Download latest release from repository
- Unzip archive into directory created in step 1
- Create a config or use command line parameters
- Optionally, create a service (for example, using PowerShell)
This is one of many potential methods for collecting metrics from a Docker infrastructure. Which method is leveraged is infrastructure and solution dependent. The advantages of this more generic method would be that metrics from the host system, as well as, individual container metrics will be collected. Additionally, applications running in containers will be able to leverage common StatsD and/or JSON endpoints exposed by the circonus-agent running on the host system.
- Install the circonus-agent on the host system (via cosi or manually)
- Run cAdvisor
- Configure cAdvisor to export metrics via StatsD to the circonus-agent or configure the circonus-agent to collect metrics from the cAdvisor Prometheus endpoint
$ /opt/circonus/agent/sbin/circonus-agentd -h
Flags:
--api-app string [ENV: CA_API_APP] Circonus API Token app (default "circonus-agent")
--api-ca-file string [ENV: CA_API_CA_FILE] Circonus API CA certificate file
--api-key string [ENV: CA_API_KEY] Circonus API Token key
--api-url string [ENV: CA_API_URL] Circonus API URL (default "https://api.circonus.com/v2/")
--check-broker string [ENV: CA_CHECK_BROKER] CID (e.g. '99' or '/broker/99') of Broker to use or 'select' for random selection of valid broker, if creating a check bundle (default "select")
-C, --check-create [ENV: CA_CHECK_CREATE] Create check bundle
-I, --check-id string [ENV: CA_CHECK_ID] Check Bundle ID or 'cosi' for cosi system check
--check-metric-filter-file string [ENV: CA_CHECK_METRIC_FILTER_FILE] JSON file with metric filters (default "/opt/circonus/agent/etc/metric_filters.json")
--check-metric-filters string [ENV: CA_CHECK_METRIC_FILTERS] List of filters used to manage which metrics are collected
-S, --check-metric-streamtags [ENV: CA_CHECK_METRIC_STREAMTAGS] Add check tags to metrics as stream tags
--check-period uint [ENV: CA_CHECK_PERIOD] When broker requests metrics [10-300] seconds (default 60)
--check-tags string [ENV: CA_CHECK_TAGS] Tags [comma separated list] to use, if creating a check bundle
-T, --check-target string [ENV: CA_CHECK_TARGET] Check target host (for creating a new check) (default host name from OS)
--check-timeout float [ENV: CA_CHECK_TIMEOUT] Timeout when broker requests metrics [0-300] seconds (default 10)
--check-title string [ENV: CA_CHECK_TITLE] Title [display name] to use, if creating a check bundle (default "<check-target> /agent")
-U, --check-update [ENV: CA_CHECK_UPDATE] Force check bundle update at start (with all configurable check bundle attributes)
--check-update-metric-filters [ENV: CA_CHECK_UPDATE_METRIC_FILTERS] Update check bundle with configured metric filters when agent starts
--cluster-enable [ENV: CA_CLUSTER_ENABLE] Enable cluster awareness mode
--cluster-enable-builtins [ENV: CA_CLUSTER_ENABLE_BUILTINS] Enable builtins in cluster awareness mode
--cluster-statsd-histogram-gauges [ENV: CA_CLUSTER_STATSD_HISTOGRAM_GAUGES] Represent StatsD gauges as histograms in cluster awareness mode
--collectors strings [ENV: CA_COLLECTORS] List of builtin collectors to enable (default based on OS)
-c, --config string config file (default is /opt/circonus/agent/etc/circonus-agent.(json|toml|yaml)
-d, --debug [ENV: CA_DEBUG] Enable debug messages
--debug-api [ENV: CA_DEBUG_API] Enable Circonus API debug messages
--debug-cgm [ENV: CA_DEBUG_CGM] Enable CGM debug messages
--debug-dump-metrics string [ENV: CA_DEBUG_DUMP_METRICS] Directory to dump sent metrics
-h, --help help for circonus-agent
--host-etc string [ENV: HOST_ETC] Host /etc directory
--host-proc string [ENV: HOST_PROC] Host /proc directory
--host-run string [ENV: HOST_RUN] Host /run directory
--host-sys string [ENV: HOST_SYS] Host /sys directory
--host-var string [ENV: HOST_VAR] Host /var directory
-l, --listen strings [ENV: CA_LISTEN] Listen spec e.g. :2609, [::1], [::1]:2609, 127.0.0.1, 127.0.0.1:2609, foo.bar.baz, foo.bar.baz:2609 (default ":2609")
-L, --listen-socket strings [ENV: CA_LISTEN_SOCKET] Unix socket to create
--log-level string [ENV: CA_LOG_LEVEL] Log level [(panic|fatal|error|warn|info|debug|disabled)] (default "info")
--log-pretty [ENV: CA_LOG_PRETTY] Output formatted/colored log lines [ignored on windows]
-m, --multi-agent [ENV: CA_MULTI_AGENT] Enable multi-agent mode
--multi-agent-interval string [ENV: CA_MULTI_AGENT_INTERVAL] Multi-agent mode interval (default "60s")
--no-gzip Disable gzip HTTP responses
--no-statsd [ENV: CA_NO_STATSD] Disable StatsD listener
-p, --plugin-dir string [ENV: CA_PLUGIN_DIR] Plugin directory (/opt/circonus/agent/plugins)
--plugin-list strings [ENV: CA_PLUGIN_LIST] List of explicit plugin commands to run
--plugin-ttl-units string [ENV: CA_PLUGIN_TTL_UNITS] Default plugin TTL units (default "s")
-r, --reverse [ENV: CA_REVERSE] Enable reverse connection
--reverse-broker-ca-file string [ENV: CA_REVERSE_BROKER_CA_FILE] Broker CA certificate file
--show-config string Show config (json|toml|yaml) and exit
--ssl-cert-file string [ENV: CA_SSL_CERT_FILE] SSL Certificate file (PEM cert and CAs concatenated together) (default "/opt/circonus/agent/etc/circonus-agent.pem")
--ssl-key-file string [ENV: CA_SSL_KEY_FILE] SSL Key file (default "/opt/circonus/agent/etc/circonus-agent.key")
--ssl-listen string [ENV: CA_SSL_LISTEN] SSL listen address and port [IP]:[PORT] - setting enables SSL
--ssl-verify [ENV: CA_SSL_VERIFY] Enable SSL verification (default true)
--statsd-addr string [ENV: CA_STATSD_ADDR] StatsD address to listen on (default "localhost")
--statsd-enable-tcp [ENV: CA_STATSD_ENABLE_TCP] Enable StatsD TCP listener
--statsd-group-cid string [ENV: CA_STATSD_GROUP_CID] StatsD group check ID
--statsd-group-counters string [ENV: CA_STATSD_GROUP_COUNTERS] StatsD group metric counter handling (average|sum) (default "sum")
--statsd-group-gauges string [ENV: CA_STATSD_GROUP_GAUGES] StatsD group gauge operator (default "average")
--statsd-group-prefix string [ENV: CA_STATSD_GROUP_PREFIX] StatsD group metric prefix (default "group.")
--statsd-group-sets string [ENV: CA_STATSD_GROPUP_SETS] StatsD group set operator (default "sum")
--statsd-host-category string [ENV: CA_STATSD_HOST_CATEGORY] StatsD host metric category (default "statsd")
--statsd-host-prefix string [ENV: CA_STATSD_HOST_PREFIX] StatsD host metric prefix
--statsd-max-tcp-connections uint [ENV: CA_STATSD_MAX_TCP_CONNS] StatsD maximum TCP connections (default 250)
--statsd-npp uint [ENV: CA_STATSD_NPP] StatsD number of packet processors (default 1)
--statsd-port string [ENV: CA_STATSD_PORT] StatsD port to listen on (default "8125")
--statsd-pqs uint [ENV: CA_STATSD_PQS] StatsD packet queue size (default 1000)
-V, --version Show version and exit
The Circonus agent can be configured via the command line, environment variables, and/or a configuration file. For details on using configuration files, see the configuration section of etc/README.md
The circonus-agent has builtin collectors offering a higher level of efficiency over executing plugins. The circonus-agent --collectors
command line option controls which collectors are enabled. Builtin collectors take precedence over plugins - if a builtin collector exists with the same ID as a plugin, the plugin will not be activated. For complete list of builtin collectors and details on collector specific configuration see etc/README.md.
Configuration:
- Command line
--collectors
(space delimited list) - Environment
CA_COLLECTORS
(space delimited list) - Config file
collectors
(array of strings)
To disable all default builtin collectors pass --collectors=""
on the command line or configure collectors
attribute in a configuration file.
For documentation on plugins please refer to plugins/README.md.
The Circonus agent provides a special handler for the endpoint /write
which will accept HTTP POST and HTTP PUT requests containing structured JSON.
The structure of the JSON expected by the receiver is the same as the JSON format accepted from plugins. See the JSON section of the plugin documentation for details on the structure.
The URL syntax for sending metrics is /write/ID
where ID
is a prefix for all of the metrics being sent in the request.
For example:
HTTP POST http://127.0.0.1:2609/write/test
with a payload of:
{
"t1": {
"_type": "i",
"_value": 32
},
"t2": {
"_tags": ["abc:123"],
"_type": "s",
"_value": "foo"
}
}
Would result in metrics in the Circonus UI of:
test`t1 numeric 32
test`t2|ST[abc:123] text "foo"
The Circonus agent provides a StatsD listener by default (disable: --no-statsd
, configure port: --statsd-port
). It accepts the basic StatsD metric types as well as, Circonus specific metric types h
and t
. In addition, the StatsD listener support adding stream tags to metrics via |#tag_list
added to a metric (where tag_list is a comma separated list of key:value pairs).
Syntax: name:value|type[|@rate][|#tag_list]
Type | Note |
---|---|
c |
Counter |
g |
Gauge |
h |
Histogram - Circonus specific |
ms |
Timing - treated as a Histogram |
s |
Sets - treated as a Counter |
t |
Text - Circonus specific |
NOTE: the derivative metrics automatically generated with some StatsD types are not created by Circonus, as the data is already available within the Circonus UI.
The /prom
endpoint will accept Prometheus style text formatted metrics sent via HTTP PUT or HTTP POST.
In some specific use-cases having multiple agents send to a single check may be desirable. This type of configuration is supported with Enterprise brokers only. To enable ensure that multi_agent.enabled
is set to true
and that every agent uses the same configuration settings for the check. For example, to generate a basic configuration:
sbin/circonus-agentd \
-m \ # enable multi-agent
-C \ # enable check creation
--collectors="" \ # disable built-in collectors
--api-key=... \ # add your api key
--check-target=common_id \ # use a common identifier on each agent instance
--check-broker=enterprise_broker_id \ # enterprise broker id
--show-config=yaml \ # format for config
>etc/circonus-agent.yaml # redirect to config file
The above command would set the following options and then redirect the output in yaml
format to a configuration file the agent could use. Copy the same configuration file to each of the systems desired.
-m
setmulti_agent.enabled
totrue
-C
setcheck.create
totrue
--collectors=""
disable all built-in collectors (to prevent aggregating metrics such as cpu/memory/disk/etc.)--api-key=
setapi.key
--check-target=
setcheck.target
use a common identifier for all of the agents, so that only ONE check will be created--check-broker=
setcheck.broker
to the enterprise broker id to use--show-config=
in preferred format (json|toml|yaml)>etc/circonus-agent.yaml
redirect to a file
- Clone repo
git clone https://github.com/circonus-labs/circonus-agent.git
- circonus-agent uses go modules, go1.12+ is required
- clone oustide of
GOPATH
(or useGO111MODULE=on
)
- Build
go build -o circonus-agentd
- Install
cp circonus-agentd /opt/circonus/agent/sbin
Unless otherwise noted, the source files are distributed under the BSD-style license found in the LICENSE file.
See Allow/Deny Filters documentation for more information.
{
"metric_filters": [
[
"deny",
"^$",
""
],
[
"allow",
"^.+$",
""
]
]
}
For automated provision/teardown a new command line option has been added --check-delete
-- only applies to checks created by the agent.
- install agent
- ensure the
etc/
directory where the agent is installed is writeable by the user running the agent - start agent - it will cache a copy of the check (if created) so that
--check-delete
functions
- stop the agent
- run the agent
sbin/circonus-agentd --check-delete