fix(cleanup): add missing handlers for cleanup

kube-router v2.X introduced the idea of iptables and ipset handlers that
allow kube-router to be dual-stack capable. However, the cleanup logic
for the various controllers was not properly ported when this happened.
When the cleanup functions run, they often have not had their
controllers fully initialized as cleanup should not be dependant on
kube-router being able to reach a kube-apiserver.

As such, they were missing these handlers. And as such they either
silently ended up doing noops or worse, they would run into nil pointer
failures.

This corrects that, so that kube-router no longer fails this way and
cleans up as it had in v1.X.

pkg/controllers/netpol/network_policy_controller.go

@@ -723,6 +723,26 @@ func (npc *NetworkPolicyController) cleanupStaleIPSets(activePolicyIPSets map[st
 func (npc *NetworkPolicyController) Cleanup() {
 	klog.Info("Cleaning up NetworkPolicyController configurations...")
 
+	if len(npc.iptablesCmdHandlers) < 1 {
+		iptablesCmdHandlers, ipSetHandlers, err := NewIPTablesHandlers(nil)
+		if err != nil {
+			klog.Errorf("unable to get iptables and ipset handlers: %v", err)
+			return
+		}
+		npc.iptablesCmdHandlers = iptablesCmdHandlers
+		npc.ipSetHandlers = ipSetHandlers
+
+		// Make other structures that we rely on
+		npc.iptablesSaveRestore = make(map[v1core.IPFamily]utils.IPTablesSaveRestorer, 2)
+		npc.iptablesSaveRestore[v1core.IPv4Protocol] = utils.NewIPTablesSaveRestore(v1core.IPv4Protocol)
+		npc.iptablesSaveRestore[v1core.IPv6Protocol] = utils.NewIPTablesSaveRestore(v1core.IPv6Protocol)
+		npc.filterTableRules = make(map[v1core.IPFamily]*bytes.Buffer, 2)
+		var buf bytes.Buffer
+		npc.filterTableRules[v1core.IPv4Protocol] = &buf
+		var buf2 bytes.Buffer
+		npc.filterTableRules[v1core.IPv6Protocol] = &buf2
+	}
+
 	var emptySet map[string]bool
 	// Take a dump (iptables-save) of the current filter table for cleanupStaleRules() to work on
 	for ipFamily, iptablesSaveRestore := range npc.iptablesSaveRestore {
@@ -762,7 +782,7 @@ func NewIPTablesHandlers(config *options.KubeRouterConfig) (
 	iptablesCmdHandlers := make(map[v1core.IPFamily]utils.IPTablesHandler, 2)
 	ipSetHandlers := make(map[v1core.IPFamily]utils.IPSetHandler, 2)
 
-	if config.EnableIPv4 {
+	if config == nil || config.EnableIPv4 {
 		iptHandler, err := iptables.NewWithProtocol(iptables.ProtocolIPv4)
 		if err != nil {
 			return nil, nil, fmt.Errorf("failed to create iptables handler: %w", err)
@@ -775,7 +795,7 @@ func NewIPTablesHandlers(config *options.KubeRouterConfig) (
 		}
 		ipSetHandlers[v1core.IPv4Protocol] = ipset
 	}
-	if config.EnableIPv6 {
+	if config == nil || config.EnableIPv6 {
 		iptHandler, err := iptables.NewWithProtocol(iptables.ProtocolIPv6)
 		if err != nil {
 			return nil, nil, fmt.Errorf("failed to create iptables handler: %w", err)

pkg/controllers/proxy/hairpin_controller.go

@@ -75,15 +75,14 @@ func (hpc *hairpinController) ensureHairpinEnabledForPodInterface(endpointIP str
 		// WARN: This method is deprecated and will be removed once docker-shim is removed from kubelet.
 		pid, err = hpc.nsc.ln.getContainerPidWithDocker(containerID)
 		if err != nil {
-			return fmt.Errorf("failed to prepare endpoint %s to do direct server return due to %v",
-				endpointIP, err)
+			return fmt.Errorf("failed to get pod's (%s) pid for hairpinning due to %v", endpointIP, err)
 		}
 	} else {
 		// We expect CRI compliant runtimes here
 		// ugly workaround, refactoring of pkg/Proxy is required
 		pid, err = hpc.nsc.ln.getContainerPidWithCRI(hpc.nsc.dsr.runtimeEndpoint, containerID)
 		if err != nil {
-			return fmt.Errorf("failed to prepare endpoint %s to do DSR due to: %v", endpointIP, err)
+			return fmt.Errorf("failed to get pod's (%s) pid for hairpinning due to %v", endpointIP, err)
 		}
 	}
 	klog.V(2).Infof("Found PID %d for endpoint IP %s", pid, endpointIP)

pkg/controllers/proxy/network_services_controller.go

@@ -1782,6 +1782,16 @@ func (nsc *NetworkServicesController) Cleanup() {
 		handle.Close()
 	}
 
+	// In prep for further steps make sure that ipset and iptables handlers are created
+	if len(nsc.iptablesCmdHandlers) < 1 {
+		// Even though we have a config at this point (via passed param), we want to send nil so that the node will
+		// discover which IP address families it has and act accordingly
+		err = nsc.setupHandlers(nil, nil)
+		if err != nil {
+			klog.Errorf("could not cleanup because we couldn't create iptables/ipset command handlers due to: %v", err)
+		}
+	}
+
 	// cleanup iptables masquerade rule
 	err = nsc.deleteMasqueradeIptablesRule()
 	if err != nil {
@@ -1790,15 +1800,21 @@ func (nsc *NetworkServicesController) Cleanup() {
 	}
 
 	// cleanup iptables hairpin rules
-	err = nsc.deleteHairpinIptablesRules(v1.IPv4Protocol)
-	if err != nil {
-		klog.Errorf("Failed to cleanup iptables hairpin rules: %s", err.Error())
-		return
+	if _, ok := nsc.iptablesCmdHandlers[v1.IPv4Protocol]; ok {
+		klog.Info("Processing IPv4 hairpin rule cleanup")
+		err = nsc.deleteHairpinIptablesRules(v1.IPv4Protocol)
+		if err != nil {
+			klog.Errorf("Failed to cleanup iptables hairpin rules: %s", err.Error())
+			return
+		}
 	}
-	err = nsc.deleteHairpinIptablesRules(v1.IPv6Protocol)
-	if err != nil {
-		klog.Errorf("Failed to cleanup iptables hairpin rules: %s", err.Error())
-		return
+	if _, ok := nsc.iptablesCmdHandlers[v1.IPv6Protocol]; ok {
+		klog.Info("Processing IPv6 hairpin rule cleanup")
+		err = nsc.deleteHairpinIptablesRules(v1.IPv6Protocol)
+		if err != nil {
+			klog.Errorf("Failed to cleanup iptables hairpin rules: %s", err.Error())
+			return
+		}
 	}
 
 	nsc.cleanupIpvsFirewall()
@@ -1927,6 +1943,70 @@ func (nsc *NetworkServicesController) handleServiceDelete(obj interface{}) {
 	nsc.OnServiceUpdate(service)
 }
 
+// setupHandlers Here we test to see whether the node is IPv6 capable, if the user has enabled IPv6 (via command-line
+// options) and the node has an IPv6 address, the following method will return an IPv6 address
+func (nsc *NetworkServicesController) setupHandlers(config *options.KubeRouterConfig, node *v1.Node) error {
+	// node being nil covers the case where this function is called by something that doesn't have a kube-apiserver
+	// connection like the cleanup code. In this instance we want all possible iptables and ipset handlers
+	if node != nil {
+		nsc.nodeIPv4Addrs, nsc.nodeIPv6Addrs = utils.GetAllNodeIPs(node)
+	}
+
+	// We test for nil configs as the Cleanup() method often doesn't have a valid config in this respect, so rather
+	// than trying to guess options, it is better to just let the logic fallthrough. For the primary path to this func,
+	// NewNetworkServicesController, the config will not be nil and we want to check that we have options that match
+	// the node's capability to ensure sanity later down the road.
+	if config != nil {
+		if config.EnableIPv4 && len(nsc.nodeIPv4Addrs[v1.NodeInternalIP]) < 1 &&
+			len(nsc.nodeIPv4Addrs[v1.NodeExternalIP]) < 1 {
+			return fmt.Errorf("IPv4 was enabled, but no IPv4 address was found on the node")
+		}
+	}
+	nsc.isIPv4Capable = len(nsc.nodeIPv4Addrs) > 0
+	if config != nil {
+		if config.EnableIPv6 && len(nsc.nodeIPv6Addrs[v1.NodeInternalIP]) < 1 &&
+			len(nsc.nodeIPv6Addrs[v1.NodeExternalIP]) < 1 {
+			return fmt.Errorf("IPv6 was enabled, but no IPv6 address was found on the node")
+		}
+	}
+	nsc.isIPv6Capable = len(nsc.nodeIPv6Addrs) > 0
+
+	nsc.ipSetHandlers = make(map[v1.IPFamily]utils.IPSetHandler)
+	nsc.iptablesCmdHandlers = make(map[v1.IPFamily]utils.IPTablesHandler)
+	if node == nil || len(nsc.nodeIPv4Addrs) > 0 {
+		iptHandler, err := iptables.NewWithProtocol(iptables.ProtocolIPv4)
+		if err != nil {
+			klog.Fatalf("Failed to allocate IPv4 iptables handler: %v", err)
+			return fmt.Errorf("failed to create iptables handler: %w", err)
+		}
+		nsc.iptablesCmdHandlers[v1.IPv4Protocol] = iptHandler
+
+		ipset, err := utils.NewIPSet(false)
+		if err != nil {
+			klog.Fatalf("Failed to allocate IPv4 ipset handler: %v", err)
+			return fmt.Errorf("failed to create ipset handler: %w", err)
+		}
+		nsc.ipSetHandlers[v1.IPv4Protocol] = ipset
+	}
+	if node == nil || len(nsc.nodeIPv6Addrs) > 0 {
+		iptHandler, err := iptables.NewWithProtocol(iptables.ProtocolIPv6)
+		if err != nil {
+			klog.Fatalf("Failed to allocate IPv6 iptables handler: %v", err)
+			return fmt.Errorf("failed to create iptables handler: %w", err)
+		}
+		nsc.iptablesCmdHandlers[v1.IPv6Protocol] = iptHandler
+
+		ipset, err := utils.NewIPSet(true)
+		if err != nil {
+			klog.Fatalf("Failed to allocate IPv6 ipset handler: %v", err)
+			return fmt.Errorf("failed to create ipset handler: %w", err)
+		}
+		nsc.ipSetHandlers[v1.IPv6Protocol] = ipset
+	}
+
+	return nil
+}
+
 // NewNetworkServicesController returns NetworkServicesController object
 func NewNetworkServicesController(clientset kubernetes.Interface,
 	config *options.KubeRouterConfig, svcInformer cache.SharedIndexInformer,
@@ -2021,51 +2101,9 @@ func NewNetworkServicesController(clientset kubernetes.Interface,
 		return nil, err
 	}
 
-	// Here we test to see whether the node is IPv6 capable, if the user has enabled IPv6 (via command-line options)
-	// and the node has an IPv6 address, the following method will return an IPv6 address
-	nsc.nodeIPv4Addrs, nsc.nodeIPv6Addrs = utils.GetAllNodeIPs(node)
-	if config.EnableIPv4 && len(nsc.nodeIPv4Addrs[v1.NodeInternalIP]) < 1 &&
-		len(nsc.nodeIPv4Addrs[v1.NodeExternalIP]) < 1 {
-		return nil, fmt.Errorf("IPv4 was enabled, but no IPv4 address was found on the node")
-	}
-	nsc.isIPv4Capable = len(nsc.nodeIPv4Addrs) > 0
-	if config.EnableIPv6 && len(nsc.nodeIPv6Addrs[v1.NodeInternalIP]) < 1 &&
-		len(nsc.nodeIPv6Addrs[v1.NodeExternalIP]) < 1 {
-		return nil, fmt.Errorf("IPv6 was enabled, but no IPv6 address was found on the node")
-	}
-	nsc.isIPv6Capable = len(nsc.nodeIPv6Addrs) > 0
-
-	nsc.ipSetHandlers = make(map[v1.IPFamily]utils.IPSetHandler)
-	nsc.iptablesCmdHandlers = make(map[v1.IPFamily]utils.IPTablesHandler)
-	if len(nsc.nodeIPv4Addrs) > 0 {
-		iptHandler, err := iptables.NewWithProtocol(iptables.ProtocolIPv4)
-		if err != nil {
-			klog.Fatalf("Failed to allocate IPv4 iptables handler: %v", err)
-			return nil, fmt.Errorf("failed to create iptables handler: %w", err)
-		}
-		nsc.iptablesCmdHandlers[v1.IPv4Protocol] = iptHandler
-
-		ipset, err := utils.NewIPSet(false)
-		if err != nil {
-			klog.Fatalf("Failed to allocate IPv4 ipset handler: %v", err)
-			return nil, fmt.Errorf("failed to create ipset handler: %w", err)
-		}
-		nsc.ipSetHandlers[v1.IPv4Protocol] = ipset
-	}
-	if len(nsc.nodeIPv6Addrs) > 0 {
-		iptHandler, err := iptables.NewWithProtocol(iptables.ProtocolIPv6)
-		if err != nil {
-			klog.Fatalf("Failed to allocate IPv6 iptables handler: %v", err)
-			return nil, fmt.Errorf("failed to create iptables handler: %w", err)
-		}
-		nsc.iptablesCmdHandlers[v1.IPv6Protocol] = iptHandler
-
-		ipset, err := utils.NewIPSet(true)
-		if err != nil {
-			klog.Fatalf("Failed to allocate IPv6 ipset handler: %v", err)
-			return nil, fmt.Errorf("failed to create ipset handler: %w", err)
-		}
-		nsc.ipSetHandlers[v1.IPv6Protocol] = ipset
+	err = nsc.setupHandlers(config, node)
+	if err != nil {
+		return nil, err
 	}
 
 	automtu, err := utils.GetMTUFromNodeIP(nsc.primaryIP)

pkg/controllers/routing/network_routes_controller.go

@@ -896,6 +896,17 @@ func (nrc *NetworkRoutingController) setupOverlayTunnel(tunnelName string, nextH
 func (nrc *NetworkRoutingController) Cleanup() {
 	klog.Infof("Cleaning up NetworkRoutesController configurations")
 
+	// In prep for further steps make sure that ipset and iptables handlers are created
+	if len(nrc.iptablesCmdHandlers) < 1 {
+		// Even though we have a config at this point (via passed param), we want to send nil so that the node will
+		// discover which IP address families it has and act accordingly
+		err := nrc.setupHandlers(nil)
+		if err != nil {
+			klog.Errorf("could not cleanup because iptables/ipset handlers could not be created due to: %v", err)
+			return
+		}
+	}
+
 	// Pod egress cleanup
 	err := nrc.deletePodEgressRule()
 	if err != nil {
@@ -1359,7 +1370,55 @@ func (nrc *NetworkRoutingController) startBgpServer(grpcServer bool) error {
 	return nil
 }
 
-// func (nrc *NetworkRoutingController) getExternalNodeIPs(
+func (nrc *NetworkRoutingController) setupHandlers(node *v1core.Node) error {
+	var err error
+
+	// node being nil covers the case where this function is called by something that doesn't have a kube-apiserver
+	// connection like the cleanup code. In this instance we want all possible iptables and ipset handlers
+	if node != nil {
+		nrc.podIPv4CIDRs, nrc.podIPv6CIDRs, err = utils.GetPodCIDRsFromNodeSpecDualStack(node)
+		if err != nil {
+			klog.Fatalf("Failed to get pod CIDRs from node spec. kube-router relies on kube-controller-manager to"+
+				"allocate pod CIDRs for the node or an annotation `kube-router.io/pod-cidrs`. Error: %v", err)
+			return fmt.Errorf("failed to get pod CIDRs detail from Node.spec: %v", err)
+		}
+	}
+
+	nrc.iptablesCmdHandlers = make(map[v1core.IPFamily]utils.IPTablesHandler)
+	nrc.ipSetHandlers = make(map[v1core.IPFamily]utils.IPSetHandler)
+	if node == nil || len(nrc.nodeIPv4Addrs) > 0 {
+		iptHandler, err := iptables.NewWithProtocol(iptables.ProtocolIPv4)
+		if err != nil {
+			klog.Fatalf("Failed to allocate IPv4 iptables handler: %v", err)
+			return fmt.Errorf("failed to create iptables handler: %w", err)
+		}
+		nrc.iptablesCmdHandlers[v1core.IPv4Protocol] = iptHandler
+
+		ipset, err := utils.NewIPSet(false)
+		if err != nil {
+			klog.Fatalf("Failed to allocate IPv4 ipset handler: %v", err)
+			return fmt.Errorf("failed to create ipset handler: %w", err)
+		}
+		nrc.ipSetHandlers[v1core.IPv4Protocol] = ipset
+	}
+	if node == nil || len(nrc.nodeIPv6Addrs) > 0 {
+		iptHandler, err := iptables.NewWithProtocol(iptables.ProtocolIPv6)
+		if err != nil {
+			klog.Fatalf("Failed to allocate IPv6 iptables handler: %v", err)
+			return fmt.Errorf("failed to create iptables handler: %w", err)
+		}
+		nrc.iptablesCmdHandlers[v1core.IPv6Protocol] = iptHandler
+
+		ipset, err := utils.NewIPSet(true)
+		if err != nil {
+			klog.Fatalf("Failed to allocate IPv6 ipset handler: %v", err)
+			return fmt.Errorf("failed to create ipset handler: %w", err)
+		}
+		nrc.ipSetHandlers[v1core.IPv6Protocol] = ipset
+	}
+
+	return nil
+}
 
 // NewNetworkRoutingController returns new NetworkRoutingController object
 func NewNetworkRoutingController(clientset kubernetes.Interface,
@@ -1473,44 +1532,9 @@ func NewNetworkRoutingController(clientset kubernetes.Interface,
 	}
 	nrc.podCidr = cidr
 
-	nrc.podIPv4CIDRs, nrc.podIPv6CIDRs, err = utils.GetPodCIDRsFromNodeSpecDualStack(node)
+	err = nrc.setupHandlers(node)
 	if err != nil {
-		klog.Fatalf("Failed to get pod CIDRs from node spec. kube-router relies on kube-controller-manager to"+
-			"allocate pod CIDRs for the node or an annotation `kube-router.io/pod-cidrs`. Error: %v", err)
-		return nil, fmt.Errorf("failed to get pod CIDRs detail from Node.spec: %v", err)
-	}
-
-	nrc.iptablesCmdHandlers = make(map[v1core.IPFamily]utils.IPTablesHandler)
-	nrc.ipSetHandlers = make(map[v1core.IPFamily]utils.IPSetHandler)
-	if len(nrc.nodeIPv4Addrs) > 0 {
-		iptHandler, err := iptables.NewWithProtocol(iptables.ProtocolIPv4)
-		if err != nil {
-			klog.Fatalf("Failed to allocate IPv4 iptables handler: %v", err)
-			return nil, fmt.Errorf("failed to create iptables handler: %w", err)
-		}
-		nrc.iptablesCmdHandlers[v1core.IPv4Protocol] = iptHandler
-
-		ipset, err := utils.NewIPSet(false)
-		if err != nil {
-			klog.Fatalf("Failed to allocate IPv4 ipset handler: %v", err)
-			return nil, fmt.Errorf("failed to create ipset handler: %w", err)
-		}
-		nrc.ipSetHandlers[v1core.IPv4Protocol] = ipset
-	}
-	if len(nrc.nodeIPv6Addrs) > 0 {
-		iptHandler, err := iptables.NewWithProtocol(iptables.ProtocolIPv6)
-		if err != nil {
-			klog.Fatalf("Failed to allocate IPv6 iptables handler: %v", err)
-			return nil, fmt.Errorf("failed to create iptables handler: %w", err)
-		}
-		nrc.iptablesCmdHandlers[v1core.IPv6Protocol] = iptHandler
-
-		ipset, err := utils.NewIPSet(true)
-		if err != nil {
-			klog.Fatalf("Failed to allocate IPv6 ipset handler: %v", err)
-			return nil, fmt.Errorf("failed to create ipset handler: %w", err)
-		}
-		nrc.ipSetHandlers[v1core.IPv6Protocol] = ipset
+		return nil, err
 	}
 
 	for _, handler := range nrc.ipSetHandlers {