Misc torque control fixes

selfdrive/car/toyota/interface.py

@@ -39,7 +39,7 @@ def get_params(candidate, fingerprint=gen_empty_fingerprint(), car_fw=[], disabl
       tire_stiffness_factor = 0.6371   # hand-tune
       ret.mass = 3045. * CV.LB_TO_KG + STD_CARGO_KG
       ret.maxLateralAccel = 1.7
-      set_lat_tune(ret.lateralTuning, LatTunes.TORQUE, MAX_LAT_ACCEL=ret.maxLateralAccel, FRICTION=0.06)
+      set_lat_tune(ret.lateralTuning, LatTunes.TORQUE, MAX_LAT_ACCEL=ret.maxLateralAccel, FRICTION=0.06, steering_angle_deadzone_deg=1.0)
 
     elif candidate == CAR.PRIUS_V:
       stop_and_go = True

selfdrive/car/toyota/tunes.py

@@ -50,9 +50,9 @@ def set_long_tune(tune, name):
 
 
 ###### LAT ######
-def set_lat_tune(tune, name, MAX_LAT_ACCEL=2.5, FRICTION=0.01, use_steering_angle=True):
+def set_lat_tune(tune, name, MAX_LAT_ACCEL=2.5, FRICTION=0.01, steering_angle_deadzone_deg=0.0, use_steering_angle=True):
   if name == LatTunes.TORQUE:
-    set_torque_tune(tune, MAX_LAT_ACCEL, FRICTION)
+    set_torque_tune(tune, MAX_LAT_ACCEL, FRICTION, steering_angle_deadzone_deg)
   elif 'PID' in str(name):
     tune.init('pid')
     tune.pid.kiBP = [0.0]

selfdrive/controls/lib/drive_helpers.py

@@ -38,6 +38,16 @@ class MPC_COST_LAT:
   STEER_RATE = 1.0
 
 
+def apply_deadzone(error, deadzone):
+  if error > deadzone:
+    error -= deadzone
+  elif error < - deadzone:
+    error += deadzone
+  else:
+    error = 0.
+  return error
+
+
 def rate_limit(new_value, last_value, dw_step, up_step):
   return clip(new_value, last_value + dw_step, last_value + up_step)
 
@@ -98,18 +108,18 @@ def get_lag_adjusted_curvature(CP, v_ego, psis, curvatures, curvature_rates):
     curvatures = [0.0]*CONTROL_N
     curvature_rates = [0.0]*CONTROL_N
   v_ego = max(v_ego, 0.1)
-  
+
   # TODO this needs more thought, use .2s extra for now to estimate other delays
   delay = CP.steerActuatorDelay + .2
-  
+
   # MPC can plan to turn the wheel and turn back before t_delay. This means
   # in high delay cases some corrections never even get commanded. So just use
   # psi to calculate a simple linearization of desired curvature
   current_curvature_desired = curvatures[0]
   psi = interp(delay, T_IDXS[:CONTROL_N], psis)
   average_curvature_desired = psi / (v_ego * delay)
   desired_curvature = 2 * average_curvature_desired - current_curvature_desired
-  
+
   # This is the "desired rate of the setpoint" not an actual desired rate
   desired_curvature_rate = curvature_rates[0]
   max_curvature_rate = MAX_LATERAL_JERK / (v_ego**2)

selfdrive/controls/lib/latcontrol_torque.py

@@ -4,6 +4,7 @@
 from common.numpy_fast import interp
 from selfdrive.controls.lib.latcontrol import LatControl, MIN_STEER_SPEED
 from selfdrive.controls.lib.pid import PIDController
+from selfdrive.controls.lib.drive_helpers import apply_deadzone
 from selfdrive.controls.lib.vehicle_model import ACCELERATION_DUE_TO_GRAVITY
 
 # At higher speeds (25+mph) we can assume:
@@ -22,13 +23,14 @@
 JERK_THRESHOLD = 0.2
 
 
-def set_torque_tune(tune, MAX_LAT_ACCEL=2.5, FRICTION=0.01):
+def set_torque_tune(tune, MAX_LAT_ACCEL=2.5, FRICTION=0.01, steering_angle_deadzone_deg=0.0):
   tune.init('torque')
   tune.torque.useSteeringAngle = True
   tune.torque.kp = 1.0 / MAX_LAT_ACCEL
   tune.torque.kf = 1.0 / MAX_LAT_ACCEL
   tune.torque.ki = 0.1 / MAX_LAT_ACCEL
   tune.torque.friction = FRICTION
+  tune.torque.steeringAngleDeadzoneDeg = steering_angle_deadzone_deg
 
 
 class LatControlTorque(LatControl):
@@ -40,10 +42,7 @@ def __init__(self, CP, CI):
     self.use_steering_angle = CP.lateralTuning.torque.useSteeringAngle
     self.friction = CP.lateralTuning.torque.friction
     self.kf = CP.lateralTuning.torque.kf
-
-  def reset(self):
-    super().reset()
-    self.pid.reset()
+    self.steering_angle_deadzone_deg = CP.lateralTuning.torque.steeringAngleDeadzoneDeg
 
   def update(self, active, CS, VM, params, last_actuators, desired_curvature, desired_curvature_rate, llk):
     pid_log = log.ControlsState.LateralTorqueState.new_message()
@@ -54,24 +53,27 @@ def update(self, active, CS, VM, params, last_actuators, desired_curvature, desi
     else:
       if self.use_steering_angle:
         actual_curvature = -VM.calc_curvature(math.radians(CS.steeringAngleDeg - params.angleOffsetDeg), CS.vEgo, params.roll)
+        curvature_deadzone = abs(VM.calc_curvature(math.radians(self.steering_angle_deadzone_deg), CS.vEgo, 0.0))
       else:
         actual_curvature_vm = -VM.calc_curvature(math.radians(CS.steeringAngleDeg - params.angleOffsetDeg), CS.vEgo, params.roll)
         actual_curvature_llk = llk.angularVelocityCalibrated.value[2] / CS.vEgo
         actual_curvature = interp(CS.vEgo, [2.0, 5.0], [actual_curvature_vm, actual_curvature_llk])
+        curvature_deadzone = 0.0
       desired_lateral_accel = desired_curvature * CS.vEgo ** 2
-      
+
       # desired rate is the desired rate of change in the setpoint, not the absolute desired curvature
-      desired_lateral_jerk = desired_curvature_rate * CS.vEgo ** 2
+      #desired_lateral_jerk = desired_curvature_rate * CS.vEgo ** 2
       actual_lateral_accel = actual_curvature * CS.vEgo ** 2
+      lateral_accel_deadzone = curvature_deadzone * CS.vEgo ** 2
 
       setpoint = desired_lateral_accel + LOW_SPEED_FACTOR * desired_curvature
       measurement = actual_lateral_accel + LOW_SPEED_FACTOR * actual_curvature
-      error = setpoint - measurement
+      error = apply_deadzone(setpoint - measurement, lateral_accel_deadzone)
       pid_log.error = error
 
       ff = desired_lateral_accel - params.roll * ACCELERATION_DUE_TO_GRAVITY
       # convert friction into lateral accel units for feedforward
-      friction_compensation = interp(desired_lateral_jerk, [-JERK_THRESHOLD, JERK_THRESHOLD], [-self.friction, self.friction])
+      friction_compensation = interp(error, [-JERK_THRESHOLD, JERK_THRESHOLD], [-self.friction, self.friction])
       ff += friction_compensation / self.kf
       freeze_integrator = CS.steeringRateLimited or CS.steeringPressed or CS.vEgo < 5
       output_torque = self.pid.update(error,

selfdrive/controls/lib/longcontrol.py

@@ -1,7 +1,7 @@
 from cereal import car
 from common.numpy_fast import clip, interp
 from common.realtime import DT_CTRL
-from selfdrive.controls.lib.drive_helpers import CONTROL_N
+from selfdrive.controls.lib.drive_helpers import CONTROL_N, apply_deadzone
 from selfdrive.controls.lib.pid import PIDController
 from selfdrive.modeld.constants import T_IDXS
 
@@ -12,16 +12,6 @@
 ACCEL_MAX_ISO = 2.0  # m/s^2
 
 
-def apply_deadzone(error, deadzone):
-  if error > deadzone:
-    error -= deadzone
-  elif error < - deadzone:
-    error += deadzone
-  else:
-    error = 0.
-  return error
-
-
 def long_control_state_trans(CP, active, long_control_state, v_ego, v_target,
                              v_target_future, brake_pressed, cruise_standstill):
   """Update longitudinal control state machine"""

selfdrive/test/process_replay/ref_commit

@@ -1 +1 @@
-935abbc21282e10572c9324382feba3fee2fe379
+123506cad1877e93bfe5c91ecdce654ef339959b