Merge pull request #596 from ckyrouac/lldb-deploy

hack: Add remote lldb utilities to hack dir

HACKING.md

@@ -66,6 +66,23 @@ with the target container host) is to just run a webserver on the host, e.g.
 run `bootc usroverlay` once, and 
 `curl -L -o /usr/bin/bootc http://10.0.1.2:8080/target/release/bootc && restorecon /usr/bin/bootc`.
 
+### Debugging via lldb
+
+The `hack/lldb` directory contains an example of how to use lldb to debug bootc code.
+`hack/lldb/deploy.sh` can be used to build and deploy a bootc VM in libvirt with an lldb-server
+running as a systemd service. Depending on your editor, you can then connect to the lldb server
+to use an interactive debugger, and set up the editor to build and push the new binary to the VM.
+`hack/lldb/dap-example-vim.lua` is an example for neovim.
+
+The VM can be connected to via `ssh test@bootc-lldb` if you have [nss](https://libvirt.org/nss.html)
+enabled.
+
+For some bootc install commands, it's simpler to run the lldb-server in a container, e.g.
+
+```bash
+sudo podman run --pid=host --network=host --privileged --security-opt label=type:unconfined_t -v /var/lib/containers:/var/lib/containers -v /dev:/dev -v .:/output localhost/bootc-lldb lldb-server platform --listen "*:1234" --server
+```
+
 ## Running the tests
 
 First, you can run many unit tests with `cargo test`.

hack/lldb/Containerfile

@@ -0,0 +1,18 @@
+FROM quay.io/centos-bootc/centos-bootc-dev:stream9
+
+COPY ./etc/sysctl.conf /etc/sysctl.conf
+COPY ./etc/systemd/system/lldb-server.service /etc/systemd/system/lldb-server.service
+COPY ./etc/sudoers.d/wheel-nopasswd /etc/sudoers.d
+ARG sshpubkey
+
+RUN dnf -y install lldb firewalld vim && \
+    firewall-offline-cmd --add-port 1025-65535/tcp && \
+    systemctl enable lldb-server.service && \
+
+    # add test user
+    if test -z "$sshpubkey"; then echo "must provide sshpubkey"; exit 1; fi; \
+    useradd -G wheel test && \
+    mkdir -m 0700 -p /home/test/.ssh && \
+    echo $sshpubkey > /home/test/.ssh/authorized_keys && \
+    chmod 0600 /home/test/.ssh/authorized_keys && \
+    chown -R test: /home/test

hack/lldb/dap-example-vim.lua

@@ -0,0 +1,122 @@
+-- This is an example of how to configure the DAP connection in an editor (neovim in this case)
+-- It should be relatively straightforward to adapt to a different editor
+
+local dap = require("dap")
+local job = require("plenary.job")
+
+-- This is a coroutine that runs the cargo build command and reports progress
+local program = function()
+  return coroutine.create(function(dap_run_co)
+    local progress = require("fidget.progress")
+
+    local cargo_build_fidget = progress.handle.create({
+      title = "cargo build",
+      lsp_client = { name = "Debugger" },
+      percentage = 0,
+    })
+
+    local cargo_build_job = job:new({
+      command = "cargo",
+      args = { "build", "--color=never", "--profile=dev" },
+      cwd = vim.fn.getcwd(),
+      enable_handlers = true,
+      on_stderr = vim.schedule_wrap(function(_, output)
+        cargo_build_fidget:report({
+          message = output,
+          percentage = cargo_build_fidget.percentage + 0.3,
+        })
+      end),
+      on_exit = function(_, return_val)
+        vim.schedule(function()
+          if return_val ~= 0 then
+            cargo_build_fidget:report({
+              message = "Error during cargo build",
+              percentage = 100,
+            })
+          else
+            cargo_build_fidget:finish()
+            coroutine.resume(dap_run_co, vim.fn.getcwd() .. "/target/debug/bootc")
+          end
+        end)
+      end,
+    })
+
+    cargo_build_job:start()
+  end)
+end
+
+dap.adapters = {
+  lldb = {
+    executable = {
+      args = {
+        "--liblldb",
+        "~/.local/share/nvim/mason/packages/codelldb/extension/lldb/lib/liblldb.so",
+        "--port",
+        "${port}",
+      },
+      command = "~/.local/share/nvim/mason/packages/codelldb/extension/adapter/codelldb",
+    },
+    host = "127.0.0.1",
+    port = "${port}",
+    type = "server",
+  },
+}
+
+-- rust config that runs cargo build before opening dap ui and starting Debugger
+-- shows cargo build status as fidget progress
+-- the newly built bootc binary is copied to the VM and run in the lldb-server
+dap.configurations.rust = {
+  {
+    args = { "status" },
+    cwd = "/",
+    name = "[remote] status",
+    program = program,
+    request = "launch",
+    console = "integratedTerminal",
+    stopOnEntry = false,
+    type = "lldb",
+    initCommands = {
+      "platform select remote-linux",
+      "platform connect connect://bootc-lldb:1234", -- connect to the lldb-server running in the VM
+      "file target/debug/bootc",
+    },
+  },
+  {
+    args = { "upgrade" },
+    cwd = "/",
+    name = "[remote] upgrade",
+    program = program,
+    request = "launch",
+    console = "integratedTerminal",
+    stopOnEntry = false,
+    type = "lldb",
+    initCommands = {
+      "platform select remote-linux",
+      "platform connect connect://bootc-lldb:1234",
+      "file target/debug/bootc",
+    },
+  },
+
+  -- The install command can connect to a container instead of a VM.
+  -- The following command is an example of how to run a container and start a lldb-server:
+  -- sudo podman run --pid=host --network=host --privileged --security-opt label=type:unconfined_t -v /var/lib/containers:/var/lib/containers -v /dev:/dev -v .:/output localhost/bootc-lldb lldb-server platform --listen "*:1234" --server
+  {
+    args = { "install", "to-disk", "--generic-image", "--via-loopback", "--skip-fetch-check", "~/.cache/bootc-dev/disks/test.raw" },
+    cwd = "/",
+    env = {
+      ["RUST_LOG"] = "debug",
+      ["BOOTC_DIRECT_IO"] = "on",
+    },
+    name = "[remote] install to-disk",
+    program = program,
+    request = "launch",
+    console = "integratedTerminal",
+    stopOnEntry = false,
+    type = "lldb",
+    initCommands = {
+      "platform select remote-linux",
+      "platform connect connect://127.0.0.1:1234", -- connect to the lldb-server running in the container
+      "file target/debug/bootc",
+    },
+  },
+}

hack/lldb/deploy.sh

@@ -0,0 +1,21 @@
+#!/bin/bash
+
+# connect to the VM using https://libvirt.org/nss.html
+
+set -e
+
+# build the container image
+sudo podman build --build-arg "sshpubkey=$(cat ~/.ssh/id_rsa.pub)" -f Containerfile -t localhost/bootc-lldb .
+
+# build the disk image
+mkdir -p ~/.cache/bootc-dev/disks
+rm -f ~/.cache/bootc-dev/disks/lldb.raw
+truncate -s 10G ~/.cache/bootc-dev/disks/lldb.raw
+sudo podman run --pid=host --network=host --privileged --security-opt label=type:unconfined_t -v /var/lib/containers:/var/lib/containers -v ~/.cache/bootc-dev/disks:/output -v /dev:/dev localhost/bootc-lldb bootc install to-disk --via-loopback --generic-image --skip-fetch-check /output/lldb.raw
+
+# create a new VM in libvirt
+set +e
+virsh -c qemu:///system destroy bootc-lldb
+virsh -c qemu:///system undefine --nvram bootc-lldb
+set -e
+sudo virt-install --name bootc-lldb --cpu host --vcpus 8 --memory 8192 --import --disk ~/.cache/bootc-dev/disks/lldb.raw --os-variant rhel9-unknown

hack/lldb/etc/sudoers.d/wheel-nopasswd

@@ -0,0 +1,2 @@
+# Enable passwordless sudo for the wheel group
+%wheel        ALL=(ALL)       NOPASSWD: ALL

hack/lldb/etc/sysctl.conf

@@ -0,0 +1,2 @@
+net.ipv6.conf.all.disable_ipv6 = 1
+net.ipv6.conf.default.disable_ipv6 = 1

hack/lldb/etc/systemd/system/lldb-server.service

@@ -0,0 +1,13 @@
+[Unit]
+Description=LLDB Server
+After=network.target
+
+[Service]
+Type=simple
+User=root
+WorkingDirectory=/root
+ExecStart=lldb-server platform --listen "*:1234" --server --min-gdbserver-port 31200 --max-gdbserver-port 31202
+Restart=on-failure
+
+[Install]
+WantedBy=multi-user.target