Cosmic LoRa Aurora is an High-End Development Board that will fasten your time to market or ease your DIY project. It is armed with an ESP32 which makes it an AI-ready device and so recommended as an Edge Device. The Cosmic LoRa Aurora dev board has three power source inputs -USB, LiPo Battery, DC Jack- which can run those options simultaneously. The board features smart power switching, which can automatically prioritize either USB, LiPo and DC Jack. So you can charge the LiPo while running the board thru USB or Solar-powered DC Jack. By default, the ESP32 has been included with WiFi and Bluetooth Low Energy. That connectivity even extended with the presence of the LoRa(WAN) module of RFM95W. LoRa(WAN) has a good reputation for low power consumption, complementing the sleep mode of ESP32, making this board even more useful in a low power ecosystem. In conclusion, this is the most go-to board for your IoT applications.
Cosmic are universe so our products name are based on universe.
Dokumentasi dalam bahasa Indonesia
- LoRa/LoRaWAN Connectivity
- WiFi & BLE Connectivity
- Inertial Measurement Unit (IMU) Sensor: 3-Axis Accelerometer 7 3-Axis Gyroscope
- Environment Sensor: Temperature & Humidity
- Altitude Sensor: Atmospheric Pressure
- ESP32 Ready for AI
- RGB LED
- On-Board Battery Charger & Level Sensor
| Features | V2 | V3 |
|---|---|---|
| Microcontroller | ESP32 | ESP32 |
| LoRa(WAN) Chip | RFM95W | RFM95W |
| LoRa(WAN) Base Freq | 915 MHz | 915 MHz |
| LoRa(WAN) Freq Range | 902-928 MHz | 902-928 MHz |
| Antenna Impedance | 50 Ohm | 50 Ohm |
| IMU Sensor | MPU6050 | LSM6DS3TRC |
| Environment & Altitude Sensor | BME280 | BME280 |
| RGB LED | WS2812B | WS2812B |
Click image for higher resolution
| RFM95W | V1 | V2 | V3 |
|---|---|---|---|
| MOSI | 23 | 23 | 23 |
| MISO | 19 | 19 | 19 |
| SCK | 18 | 18 | 18 |
| NSS | 2 | 15 | 15 |
| RST | 13 | 0 | 0 |
| DIO0 | 14 | 27 | 27 |
| DIO1 | 12 | 2 | 2 |
| ENABLE | 32 Active Low | 32 Active High | 32 Active High |
| Version | Peripheral | ESP32 Pin |
|---|---|---|
| V2, V3 | BME280 SDA | 21 |
| V2, V3 | BME280 SCL | 22 |
| V2 | IMU MPU6050 SDA | 21 |
| V2 | IMU MPU6050 SCL | 22 |
| V3 | IMU LSM6DS3TRC SDA | 21 |
| V3 | IMU LSM6DS3TRC SCL | 22 |
| V2, V3 | BATT LEVEL SENSOR | 34 |
| V2, V3 | RGB LED WS2812 | 33 |
- LoRa Point-to-Point
- LoRaWAN ANTARES
- LoRaWAN The Things Network
- RGB LED (avail on v2, v3 only)
- BME280 (avail on v2, v3 only)
- MPU6050 (avail on v2 only)
- LSM6DS3TRC (avail on v3 only)
On-going
Any issue of the tutorial or need IoT solutions? Please contact us