Skip to content

A small CLI utility to sync credentials from various sources to various targets (Jenkins for now)

License

Notifications You must be signed in to change notification settings

coveooss/credentials-sync

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

credentials-sync

Build Go Report Card

Sync credentials from various sources to various targets. Source credentials are defined and stored in standardized formats, and are converted to the target's format upon sync.

The supported sources and targets are listed below. We are open to supporting more targets.

What's the point?

  1. Easier credentials rotations. Rotating credentials manually is simply not an option when credentials rotations are done too often.
  2. Uses a push-model instead of a pull-model which means that you can put your credentials in a secure environment to which targets don't have access, targets may have varying degrees of security (prod vs dev).
  3. Decouples your credentials and the systems which use these credentials. Standardized credentials format for all targets.

Installation

Usage

  • Write a config file, see format here
  • Run the sync command
credentials-sync sync -c config.yml

Run without any argument for the full list of available commands.

Logging

The log level can be set with either:

  • The --log-level option
  • The SYNC_LOG_LEVEL env variable

Valid levels are debug, info, warning and error.

example

Monitoring with Sentry

To send errors to Sentry, set the following environment variables:

  • SENTRY_DSN
  • SENTRY_RELEASE
  • SENTRY_ENVIRONMENT

Configuration file

A configuration file must be given to the application. Its path can either be a local path or a S3 path The path can either be passed as a parameter (-c/--config) or as an environment variable (SYNC_CONFIG).

A configuration file contains sources which contain credentials. It also defines targets to which these credentials will be synced.

Here is the accepted format:

sources:
  local:
    - file: /home/jdoe/path/to/file.yaml
  aws_s3:
    - bucket: name
      key: path/to/file.yaml
  aws_secretsmanager:
    - secret_prefix: credentials-sync/
    - secret_id: arn:aws:secretsmanager:us-west-2:123456789012:secret:production/MyAwesomeAppSecret-a1b2c3
stop_on_error: true   # If true, will completely stop the process if an operation fails. Otherwise, continues anyways
target_parallelism: 3 # Number of target on which to sync creds at the same time
credentials_to_delete: # These will be removed from every target
  - number1
  - number2
targets:
  jenkins:
    - name: toolsjenkins
      url: https://toolsjenkins.my-domain.com
      credentials_id: toolsjenkins # Uses a set of username:password credentials

Supported sources

Here are the supported sources:

  • local: Local (Single file)
  • aws_s3: AWS S3 (Single object)
  • aws_secretsmanager: AWS SecretsManager (Single secret or a secret prefix)

The source's value must either be a list or a map in the following formats (JSON or YAML):

# list
- id: my_cred
  target_id: id_on_target # Optional, defaults to the ID
  description: a description
  ...
- id: my_other_cred
  target_id: id_on_target # Optional, defaults to the ID
  ...

# map
my_cred:
  target_id: id_on_target # Optional, defaults to the ID
  description: a description
  ...
my_other_cred:
  target_id: id_on_target # Optional, defaults to the ID
  ...

Supported types of source credentials

Credentials are defined as JSON or YAML, here are the supported types of source credentials with definition examples:

  • Secret text
  • Username/Password
  • AWS IAM
  • SSH Key
  • Github App
secret_text:
  description: A secret text cred is only composed of a secret
  type: secret
  secret: xoxb-a-slack-token
  • Username password
username_password:
  description: A username:password cred is composed of two values, a username and a password
  type: usernamepassword
  username: jdoe
  password: hunter42
  • AWS IAM credentials
aws_iam:
  description: IAM creds are composed of an access key, a secret access key and optionally a role to assume
  type: aws
  access_key: AKIAMYFAKEKEY
  secret_key: fdjVEsefk4kgjVsdjfew54
  role_arn: arn:aws:iam::123456789012:role/S3Access
  • SSH credentials
ssh_key:
  description: An SSH key is composed of a private key, a username and optionally, a passphrase
  type: ssh
  username: jdoe
  passphrase: hunter42
  private_key: |
    -----BEGIN RSA PRIVATE KEY-----
    MIIJKAIBAAKCAgEAvlXlTSaTs2VfvtYM+6UF9AQVhd6V7DeU1ViMQaLmEvWHkd/y
    vZEipSq+rI3vis0ObviouslyNotValidlollyiIkfd7bIoHRnQXCV8le/dzXBiAt
    Pa1fxCEkcsjJjwWBwDrGw3qGS6T+ElgngisI7YKBXrVqVKQaEeUEeqACwI5j9LoZ
    yuuoMQ9TLNjWFfcDK5Pl/0RhWrGEZDFAaSHm/lyLhxHvWR0GYSJ2V9XG2UTi6Zdq
    i11Ol956OqlmjyzpqmyYFCBzzhv7uLlI31/0MZfjQQJUa1JeQCL+Usjj+3GICDlu
    Yi7xX7n5GW4h7w43KXH1HHV+J1BE3w53uuzm+cATnEWc/raNopeDontEvenTryIt
    -----END RSA PRIVATE KEY-----
  • github App credentials
github_app:
  description:  
  type: github_app
  app_id: The github app ID.  It can be found on github in the app's settings, on the General page in the About section.
  private_key: |
    The private key with which to authenticate to github.  It must be in PKCS#8 format.
    Github gives it in PKCS#1 format.  Convert it to PKCS#8 with:
    `openssl pkcs8 -topk8 -inform PEM -outform PEM -in current-key.pem -out new-key.pem -nocrypt`
  owner: The organisation or user that this app is to be used for.  Only required if this app is installed to multiple
         organisations.

Supported targets

Here are the supported targets:

  • jenkins: Jenkins global credentials

Jenkins target

The jenkins target supports the following configuration parameters:

  jenkins:
    - name: Name of this target
      url: URL to the Jenkins server
      credentials_id: The ID of the global credential to modify in Jenkins

Other features

Unsynced credentials

Since credentials are also used for authentication, you may wish to not sync them:

toolsjenkins:
  description: Login credentials for jenkins
  type: usernamepassword
  username: jdoe
  password: apikey
  no_sync: true # This will prevent this cred from being synced

Target matching

Sometimes, certain credentials should only be synced to certain targets. There are two ways to make sure this happens:

  1. Matching on target's name
secret_text:
  description: A secret text cred is only composed of a secret
  type: secret
  secret: xoxb-a-slack-token
  target: toolsjenkins # This cred will only be synced to the toolsjenkins target
  1. Matching on target tags
# In config file
targets:
  jenkins:
    - name: toolsjenkins
      url: https://toolsjenkins.my-domain.com
      credentials_id: toolsjenkins
      tags:
        my_tag: my_value

# In credentials definition
secret_text:
  description: A secret text cred is only composed of a secret
  type: secret
  secret: xoxb-a-slack-token
  target_tags:
    do_match:
      my_tag: value # Will only sync to targets if my_tag == "value"
      my_other_tag: ["value1", "value2"] # OR if my_other_tag == "value1" OR my_other_tag == "value2"
    dont_match:
      my_tag: ["other_value", "some_value"] # Will not sync to targets if my_tag == "other_value" or if my_tag == "some_value", regardless of `do_match`

Using the docker image

For every version, a docker image is published here: https://hub.docker.com/r/coveo/credentials-sync
The only parameter needed for the credentials sync is the configuration file (You can set its location with SYNC_CONFIG env variable)
This allows you to run this as a cron job in AWS Fargate or Kubernetes, for example

Roadmap

  • Incremental runs (keep a state file and only update credentials that have been modified at the source level. This would have to be optional because full runs will still be need to sync back credentials that have been modified at the target level)
  • LastPass target
  • Terraform state file source
  • SSM Parameter store source (not in the regular JSON format)

Contributing

Pull requests are welcome. For major changes, please open an issue first to discuss what you would like to change.

Please make sure to update tests as appropriate.

License

MIT

About

A small CLI utility to sync credentials from various sources to various targets (Jenkins for now)

Resources

License

Stars

Watchers

Forks

Packages

 
 
 

Languages