mcu.h -> hal.h

README.md

@@ -1117,17 +1117,17 @@ mechanism. We use newlib, so let's modify `_write()` syscall to print to the
 UART3.
 
 Before that, let's organise our source code in the following way:
-- move all API definitions to the file `mcu.h`
+- move all API definitions to the file `hal.h` (Harware Abstraction Layer)
 - move startup code to `startup.c`
 - create an empty file `syscalls.c` for newlib "syscalls"
 - modify Makefile to add `syscalls.c` and `startup.c` to the build
 
-After moving all API definitions to the `mcu.h`, our `main.c` file becomes
+After moving all API definitions to the `hal.h`, our `main.c` file becomes
 quite compact. Note that it does not have any mention of the low-level
 registers, just a high level API functions that are easy to understand:
 
 ```c
-#include "mcu.h"
+#include "hal.h"
 
 static volatile uint32_t s_ticks;
 void SysTick_Handler(void) {
@@ -1157,7 +1157,7 @@ Great, now let's retarget printf to the UART3. In the empty syscalls.c,
 copy/paste the following code:
 
 ```c
-#include "mcu.h"
+#include "hal.h"
 
 int _write(int fd, char *ptr, int len) {
   (void) fd, (void) ptr, (void) len;
@@ -1272,7 +1272,7 @@ Choose our firmware.elf file:
 <img src="images/ozone3.png" width="50%" />
 
 Leave the defaults on the next screen, click Finish, and we've got our
-debugger loaded (note the mcu.h source code is picked up):
+debugger loaded (note the hal.h source code is picked up):
 
 ![](images/ozone4.png)
 
@@ -1329,8 +1329,8 @@ The ST CMSIS package also provides startup files for all their MCUs. We
 can use those instead of hand-writing the startup.c. The ST-provided startup
 file calls `SystemInit()` function, so we define it in the `main.c`.
 
-Now, let's replace our API functions in the `mcu.h` using CMSIS definitions,
-and leave the rest of the firmware intact.  From the `mcu.h`, remove all
+Now, let's replace our API functions in the `hal.h` using CMSIS definitions,
+and leave the rest of the firmware intact.  From the `hal.h`, remove all
 peripheral API and definitions, and leave only standard C inludes, vendor CMSIS
 include, defines to PIN, BIT, FREQ, and `timer_expired()` helper function.
 
@@ -1343,7 +1343,7 @@ Let's start from `systick_init()`. ARM core CMSIS headers provide a
 
 Next goes `gpio_set_mode()` function. The  `stm32f429xx.h` header has
 `GPIO_TypeDef` structure, identical to our `struct gpio`. Let's use it:
-https://github.com/cpq/bare-metal-programming-guide/blob/785aa2ead0432fc67327781c82b9c41149fba158/step-5-cmsis/mcu.h#L24-L33
+https://github.com/cpq/bare-metal-programming-guide/blob/785aa2ead0432fc67327781c82b9c41149fba158/step-5-cmsis/hal.h#L24-L33
 
 The `gpio_set_af()` and `gpio_write()` functions is also trivial -
 simply replace `struct gpio` with `GPIO_TypeDef`, and that's all.

README_zh-CN.md

@@ -894,15 +894,15 @@ newlib实现了一些标准C函数，特别是文件输入输出操作，并且
 
 在那之前，我们先重新组织下源码结构：
 
-- 把所有API定义放到 `mcu.h` 文件中
+- 把所有API定义放到 `hal.h` 文件中
 - 把启动代码放到 `startup.c` 文件中
 - 为newlib的系统调用创建一个空文件 `syscalls.c`
 - 修改Makefile，把 `syscalls.c` 和 `startup.c` 加到build中
 
-将所有 API 定义移动到 `mcu.h` 后，`main.c` 文件变得相当紧凑。注意我们还没提到底层寄存器，高级API函数很容易理解：
+将所有 API 定义移动到 `hal.h` 后，`main.c` 文件变得相当紧凑。注意我们还没提到底层寄存器，高级API函数很容易理解：
 
 ```c
-#include "mcu.h"
+#include "hal.h"
 
 static volatile uint32_t s_ticks;
 void SysTick_Handler(void) {
@@ -931,7 +931,7 @@ int main(void) {
 现在我们把 `printf()` 重定向到串口3，在空的 `syscalls.c` 文件中拷入一下内容：
 
 ```c
-#include "mcu.h"
+#include "hal.h"
 
 int _write(int fd, char *ptr, int len) {
   (void) fd, (void) ptr, (void) len;
@@ -1027,7 +1027,7 @@ LED: 0, tick: 1000
 
 <img src="images/ozone3.png" width="50%" />
 
-接下来的步骤保持默认，点击“完成”，调试器已经载入（可以看到`mcu.h`源码被拾取）：
+接下来的步骤保持默认，点击“完成”，调试器已经载入（可以看到`hal.h`源码被拾取）：
 
 <img src="images/ozone3.png" width="50%" />
 
@@ -1060,7 +1060,7 @@ LED: 0, tick: 1000
 
 CMSIS代表通用微控制器软件接口标准（Common Microcontroller Software Interface Standard），因此它是MCU制造商指定外设API的共同基础。 因为CMSIS是一种ARM标准，并且CMSIS头文件由MCU厂商提供，所以是权威的来源。因此，使用供应商头文件是首选方法，而不是手动编写定义。
 
-在这一节，我们将使用供应商CMSIS头文件替换 `mcu.h` 中的API函数，并保持固件其它部分不变。
+在这一节，我们将使用供应商CMSIS头文件替换 `hal.h` 中的API函数，并保持固件其它部分不变。
 
 STM32 F4系列的CMSIS头文件在这个[仓库](https://github.com/STMicroelectronics/cmsis_device_f4)，从那里将以下文件拷到我们的固件文件夹[step-5-cmsis](step-5-cmsis)：
 
@@ -1074,7 +1074,7 @@ Those two files depend on a standard ARM CMSIS includes, download them too:
 - [cmsis_compiler.h](https://raw.githubusercontent.com/STMicroelectronics/STM32CubeF4/master/Drivers/CMSIS/Core/Include/cmsis_compiler.h)
 - [mpu_armv7.h](https://raw.githubusercontent.com/STMicroelectronics/STM32CubeF4/master/Drivers/CMSIS/Core/Include/mpu_armv7.h)
 
-然后移除 `mcu.h` 中所有外设API和定义，只留下标准C包含、供应商CMSIS包含，引脚定义等：
+然后移除 `hal.h` 中所有外设API和定义，只留下标准C包含、供应商CMSIS包含，引脚定义等：
 
 ```c
 #pragma once

step-4-printf/main.c

@@ -1,7 +1,7 @@
 // Copyright (c) 2022 Cesanta Software Limited
 // All rights reserved
 
-#include "mcu.h"
+#include "hal.h"
 
 static volatile uint32_t s_ticks;
 void SysTick_Handler(void) {

step-4-printf/syscalls.c

@@ -3,7 +3,7 @@
 
 #include <sys/stat.h>
 
-#include "mcu.h"
+#include "hal.h"
 
 int _fstat(int fd, struct stat *st) {
   if (fd < 0) return -1;

step-5-cmsis/Makefile

@@ -15,7 +15,7 @@ endif
 
 build: firmware.bin
 
-firmware.elf: cmsis_core cmsis_f4 mcu.h link.ld Makefile $(SOURCES) 
+firmware.elf: cmsis_core cmsis_f4 hal.h link.ld Makefile $(SOURCES) 
 	arm-none-eabi-gcc $(SOURCES) $(CFLAGS) $(CFLAGS_EXTRA) $(LDFLAGS) -o $@
 
 firmware.bin: firmware.elf

step-5-cmsis/main.c

@@ -1,7 +1,7 @@
 // Copyright (c) 2022 Cesanta Software Limited
 // All rights reserved
 
-#include "mcu.h"
+#include "hal.h"
 
 static volatile uint32_t s_ticks;
 void SysTick_Handler(void) {

step-5-cmsis/syscalls.c

@@ -3,7 +3,7 @@
 
 #include <sys/stat.h>
 
-#include "mcu.h"
+#include "hal.h"
 
 int _fstat(int fd, struct stat *st) {
   if (fd < 0) return -1;

step-6-clock/main.c

@@ -1,7 +1,7 @@
 // Copyright (c) 2022 Cesanta Software Limited
 // All rights reserved
 
-#include "mcu.h"
+#include "hal.h"
 
 static volatile uint32_t s_ticks;
 void SysTick_Handler(void) { s_ticks++; }

step-6-clock/syscalls.c

@@ -3,7 +3,7 @@
 
 #include <sys/stat.h>
 
-#include "mcu.h"
+#include "hal.h"
 
 int _fstat(int fd, struct stat *st) {
   if (fd < 0) return -1;

step-7-webserver/ek-tm4c1294xl/main.c

@@ -1,7 +1,7 @@
 // Copyright (c) 2022 Cesanta Software Limited
 // All rights reserved
 
-#include "mcu.h"
+#include "hal.h"
 #include "mongoose.h"
 
 static volatile uint32_t s_ticks;

step-7-webserver/ek-tm4c1294xl/syscalls.c

@@ -3,7 +3,7 @@
 
 #include <sys/stat.h>
 
-#include "mcu.h"
+#include "hal.h"
 
 int _fstat(int fd, struct stat *st) {
   if (fd < 0) return -1;

step-7-webserver/nucleo-f429zi/main.c

@@ -1,7 +1,7 @@
 // Copyright (c) 2022 Cesanta Software Limited
 // All rights reserved
 
-#include "mcu.h"
+#include "hal.h"
 #include "mongoose.h"
 
 static volatile uint32_t s_ticks;

step-7-webserver/nucleo-f429zi/syscalls.c

@@ -3,7 +3,7 @@
 
 #include <sys/stat.h>
 
-#include "mcu.h"
+#include "hal.h"
 
 int _fstat(int fd, struct stat *st) {
   if (fd < 0) return -1;

step-7-webserver/pico-w5500/Makefile

@@ -20,7 +20,7 @@ $(BIN2UF2): tools/bin2uf2.c
 	$(CC) -W -Wall $< -o $@
 endif
 
-firmware.elf: $(SOURCES) mcu.h
+firmware.elf: $(SOURCES) hal.h
 	arm-none-eabi-gcc $(SOURCES) $(CFLAGS) $(LDFLAGS) -o $@
 
 firmware.bin: firmware.elf

step-7-webserver/pico-w5500/main.c

@@ -1,7 +1,7 @@
 // Copyright (c) 2023 Cesanta Software Limited
 // All rights reserved
 
-#include "mcu.h"
+#include "hal.h"
 #include "mongoose.h"
 
 enum { LED = 25 };                                             // LED pins

step-7-webserver/pico-w5500/startup.c

@@ -1,7 +1,7 @@
 // Copyright (c) 2022 Cesanta Software Limited
 // All rights reserved
 
-#include "mcu.h"
+#include "hal.h"
 
 // Startup code
 __attribute__((naked, section(".boot"))) void _reset(void) {

step-7-webserver/pico-w5500/syscalls.c

@@ -3,7 +3,7 @@
 
 #include <sys/stat.h>
 
-#include "mcu.h"
+#include "hal.h"
 
 int _fstat(int fd, struct stat *st) {
   if (fd < 0) return -1;