Hpsa next #2

dabrace · 2014-11-10T00:41:41Z

No description provided.

0x4c6e is a secondary device id so should not be used by the driver. Noticed-by: Mark Kettenis <mark.kettenis@xs4all.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org

When I was adjusting patch in 848d479 to use devm_ioremap_resource() I messed it up. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Coverity pointed out that at return point error is always 0 so the conditional is not needed. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

I believe the intent of the code was to drop oldest bytes from the queue, not the latest if we drop one byte and both latest and some oldest of we are dropping more than one. Acked-by: Jan-Benedict Glaw <jbglaw@lug-owl.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: David S. Miller <davem@davemloft.net>

psmouse_reconnect() will not be called if psmouse driver is not bound to the serio port, so there is no point in checking that. Also, as coded, it introduces potential NULL dereference in psmouse_dbg() in case psmouse is indeed NULL. Let's just remove it. Detected by Coverity: CID 146528 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

If there is a mismatch between enabled tagging protocols and the protocol the switch supports, error out, rather than continue with a situation which is unlikely to work. Signed-off-by: Andrew Lunn <andrew@lunn.ch> cc: alexander.h.duyck@intel.com Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

The mv88e6171 can support two different tagging protocols, DSA and EDSA. The switch driver structure only allows one protocol to be enumerated, and DSA was chosen. However the Kconfig entry ensures the EDSA tagging code is built. With a minimal configuration, we then end up with a mismatch. The probe is successful, EDSA tagging is used, but the switch is configured for DSA, resulting in mangled packets. Change the switch driver structure to enumerate EDSA, fixing the mismatch. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Fixes: 42f2725 ("net: DSA: Marvell mv88e6171 switch driver") Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

when slave 0 has no phy and slave 1 connected to phy, driver probe will fail as there is no phy id present for slave 0 device tree, so continuing even though no phy-id found, also moving mac-id read later to ensure mac-id is read from device tree even when phy-id entry in not found. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>

When unmapping a range of pages in zap_pte_range, the page being unmapped is added to an mmu_gather_batch structure for asynchronous freeing. If we run out of space in the batch structure before the range has been completely unmapped, then we break out of the loop, force a TLB flush and free the pages that we have batched so far. If there are further pages to unmap, then we resume the loop where we left off. Unfortunately, we forget to update addr when we break out of the loop, which causes us to truncate the range being invalidated as the end address is exclusive. When we re-enter the loop at the same address, the page has already been freed and the pte_present test will fail, meaning that we do not reconsider the address for invalidation. This patch fixes the problem by incrementing addr by the PAGE_SIZE before breaking out of the loop on batch failure. Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 35ce7f2 (rcu: Create rcuo kthreads only for onlined CPUs) avoids creating rcuo kthreads for CPUs that never come online. This fixes a bug in many instances of firmware: Instead of lying about their age, these systems instead lie about the number of CPUs that they have. Before commit 35ce7f2, this could result in huge numbers of useless rcuo kthreads being created. It appears that experience indicates that I should have told the people suffering from this problem to fix their broken firmware, but I instead produced what turned out to be a partial fix. The missing piece supplied by this commit makes sure that rcu_barrier() knows not to post callbacks for no-CBs CPUs that have not yet come online, because otherwise rcu_barrier() will hang on systems having firmware that lies about the number of CPUs. It is tempting to simply have rcu_barrier() refuse to post a callback on any no-CBs CPU that does not have an rcuo kthread. This unfortunately does not work because rcu_barrier() is required to wait for all pending callbacks. It is therefore required to wait even for those callbacks that cannot possibly be invoked. Even if doing so hangs the system. Given that posting a callback to a no-CBs CPU that does not yet have an rcuo kthread can hang rcu_barrier(), It is tempting to report an error in this case. Unfortunately, this will result in false positives at boot time, when it is perfectly legal to post callbacks to the boot CPU before the scheduler has started, in other words, before it is legal to invoke rcu_barrier(). So this commit instead has rcu_barrier() avoid posting callbacks to CPUs having neither rcuo kthread nor pending callbacks, and has it complain bitterly if it finds CPUs having no rcuo kthread but some pending callbacks. And when rcu_barrier() does find CPUs having no rcuo kthread but pending callbacks, as noted earlier, it has no choice but to hang indefinitely. Reported-by: Yanko Kaneti <yaneti@declera.com> Reported-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reported-by: Meelis Roos <mroos@linux.ee> Reported-by: Eric B Munson <emunson@akamai.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Eric B Munson <emunson@akamai.com> Tested-by: Jay Vosburgh <jay.vosburgh@canonical.com> Tested-by: Yanko Kaneti <yaneti@declera.com> Tested-by: Kevin Fenzi <kevin@scrye.com> Tested-by: Meelis Roos <mroos@linux.ee>

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

…t items We have a race that can lead us to miss skinny extent items in the function btrfs_lookup_extent_info() when the skinny metadata feature is enabled. So basically the sequence of steps is: 1) We search in the extent tree for the skinny extent, which returns > 0 (not found); 2) We check the previous item in the returned leaf for a non-skinny extent, and we don't find it; 3) Because we didn't find the non-skinny extent in step 2), we release our path to search the extent tree again, but this time for a non-skinny extent key; 4) Right after we released our path in step 3), a skinny extent was inserted in the extent tree (delayed refs were run) - our second extent tree search will miss it, because it's not looking for a skinny extent; 5) After the second search returned (with ret > 0), we look for any delayed ref for our extent's bytenr (and we do it while holding a read lock on the leaf), but we won't find any, as such delayed ref had just run and completed after we released out path in step 3) before doing the second search. Fix this by removing completely the path release and re-search logic. This is safe, because if we seach for a metadata item and we don't find it, we have the guarantee that the returned leaf is the one where the item would be inserted, and so path->slots[0] > 0 and path->slots[0] - 1 must be the slot where the non-skinny extent item is if it exists. The only case where path->slots[0] is zero is when there are no smaller keys in the tree (i.e. no left siblings for our leaf), in which case the re-search logic isn't needed as well. This race has been present since the introduction of skinny metadata (change 3173a18). Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>

Marvell phy 88E1145 configuration & initialization was missing a case for initializing SGMII mode. This patch adds that case. Signed-off-by: Vince Bridgers <vbridger@opensource.altera.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Fix kernel-doc warning in <linux/skbuff.h> by making both headers_start and headers_end private fields. Warning(..//include/linux/skbuff.h:654): No description found for parameter 'headers_end[0]' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>

When arch/arm/mach-ixp4xx/common-pci.c is compiled, two warnings occur: arch/arm/mach-ixp4xx/include/mach/io.h:144: warning: passing argument 1 of '__raw_readb' makes pointer from integer without a cast arch/arm/mach-ixp4xx/include/mach/io.h:79: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast Both functions expect an 'volatile void __iomem *' but get an u32. The 'u32 addr' variable is initialized with the address of an 'volatile void __iomem *' pointer. Passing the pointer directly, avoids the warning and semantics are preserved. This warning was found with vampyr. Signed-off-by: Stefan Hengelein <stefan.hengelein@fau.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The of_device_id table is supposed to be zero-terminated. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

There is currently a small window during which the SYSTEMPORT adapter enables its RX interrupts without having enabled its NAPI handler, which can result in packets to be discarded during interface bringup. A similar but more serious window exists in bcm_sysport_resume() during which we can have the RDMA engine not fully prepared to receive packets and yet having RX interrupts enabled. Fix this my moving the RX interrupt enable down to bcm_sysport_netif_start() after napi_enable() for the RX path is called, which fixes both call sites: bcm_sysport_open() and bcm_sysport_resume(). Fixes: b02e6d9 ("net: systemport: add bcm_sysport_netif_{enable,stop}") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

bcm_sysport_resume() was missing an UniMAC reset which can lead to various receive FIFO corruptions coming out of a suspend cycle. If the RX FIFO is stuck, it will deliver corrupted/duplicate packets towards the host CPU interface. This could be reproduced on crowded network and when Wake-on-LAN is enabled for this particular interface because the switch still forwards packets towards the host CPU interface (SYSTEMPORT), and we had to leave the UniMAC RX enable bit on to allow matching MagicPackets. Once we re-enter the resume function, there is a small window during which the UniMAC receive is still enabled, and we start queueing packets, but the RDMA and RBUF engines are not ready, which leads to having packets stuck in the UniMAC RX FIFO, ultimately delivered towards the host CPU as corrupted. Fixes: 40755a0 ("net: systemport: add suspend and resume support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

This patch enables configs required to boot IFC6540 board with atleast a serial console. Without this patch there is no serial console. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The recent refactoring of the bulkstat code left a small landmine in the code. If a inobt read fails, then the tree walk is aborted and returns without releasing the AGI buffer or freeing the cursor. This can lead to a subsequent bulkstat call hanging trying to grab the AGI buffer again. cc: <stable@vger.kernel.org> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>

To delegate promiscuous mode and multicast filtering to the subdriver. Signed-off-by: Olivier Blin <olivier.blin@softathome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

This will be used by the set_rx_mode callback. Also move a comment about multicast filtering in this new function. Signed-off-by: Olivier Blin <olivier.blin@softathome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Promiscuous mode was not supported anymore with my Lenovo adapters (RTL8153) since commit c472ab6 (cdc-ether: clean packet filter upon probe). It was not possible to use them in a bridge anymore. Signed-off-by: Olivier Blin <olivier.blin@softathome.com> Also-analyzed-by: Loïc Yhuel <loic.yhuel@softathome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit cd678fc ("switch logger to ->write_iter()"), any attempt to write to the log results in the log data being written over its own metadata, thus rendering the log unreadable. The problem was first detected when I ran an Android userspace on the v3.18-rc1 kernel. However the issue can also be observed with a non-Android userspace by using echo/cat to write to/from /dev/log_main . This patch resolves the problem by using a temporary to track the status of not-yet-committed writes to the log buffer. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Although rcu_dereference() and friends can be used in situations where object lifetimes are being managed by something other than RCU, the resulting sparse and lockdep-RCU noise can be annoying. This commit therefore supplies a lockless_dereference(), which provides the protection for dereferences without the RCU-related debugging noise. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

make sure that a) all stores done by opening struct file don't leak past storing the reference in od->upperfile b) the lockless side has read dependency barrier Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ovl_cache_entry.name is now an array not a pointer, so it makes no sense test for it being NULL. Detected by coverity. From: Miklos Szeredi <mszeredi@suse.cz> Fixes: 68bf861 ("overlayfs: make ovl_cache_entry->name an array instead of +pointer") Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

In an overlay directory that shadows an empty lower directory, say /mnt/a/empty102, do: touch /mnt/a/empty102/x unlink /mnt/a/empty102/x rmdir /mnt/a/empty102 It's actually harmless, but needs another level of nesting between I_MUTEX_CHILD and I_MUTEX_NORMAL. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Tested-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The evlist has the maps with its own refcounts so we don't need to set the pointers to NULL. Otherwise following error was reported by Asan. # perf test -v 4 4: Read samples using the mmap interface : --- start --- test child forked, pid 139782 mmap size 528384B ================================================================= ==139782==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f1f76daee8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x564ba21a0fea in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x564ba21a1a0f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x564ba21a21cf in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x564ba21a21cf in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x564ba1e48298 in test__basic_mmap tests/mmap-basic.c:55 #6 0x564ba1e278fb in run_test tests/builtin-test.c:428 #7 0x564ba1e278fb in test_and_print tests/builtin-test.c:458 #8 0x564ba1e29a53 in __cmd_test tests/builtin-test.c:679 #9 0x564ba1e29a53 in cmd_test tests/builtin-test.c:825 #10 0x564ba1e95cb4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x564ba1d1fa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x564ba1d1fa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x564ba1d1fa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7f1f768e4d09 in __libc_start_main ../csu/libc-start.c:308 ... test child finished with 1 ---- end ---- Read samples using the mmap interface: FAILED! failed to open shell test directory: /home/namhyung/libexec/perf-core/tests/shell Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20210301140409.184570-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evlist has the maps with its own refcounts so we don't need to set the pointers to NULL. Otherwise following error was reported by Asan. Also change the goto label since it doesn't need to have two. # perf test -v 24 24: Number of exit events of a simple workload : --- start --- test child forked, pid 145915 mmap size 528384B ================================================================= ==145915==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fc44e50d1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164 #1 0x561cf50f4d2e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23 #2 0x561cf4eeb949 in thread_map__new_by_tid util/thread_map.c:63 #3 0x561cf4db7fd2 in test__task_exit tests/task-exit.c:74 #4 0x561cf4d798fb in run_test tests/builtin-test.c:428 #5 0x561cf4d798fb in test_and_print tests/builtin-test.c:458 #6 0x561cf4d7ba53 in __cmd_test tests/builtin-test.c:679 #7 0x561cf4d7ba53 in cmd_test tests/builtin-test.c:825 #8 0x561cf4de7d04 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #9 0x561cf4c71a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #10 0x561cf4c71a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #11 0x561cf4c71a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #12 0x7fc44e042d09 in __libc_start_main ../csu/libc-start.c:308 ... test child finished with 1 ---- end ---- Number of exit events of a simple workload: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evlist has the maps with its own refcounts so we don't need to set the pointers to NULL. Otherwise following error was reported by Asan. Also change the goto label since it doesn't need to have two. # perf test -v 25 25: Software clock events period values : --- start --- test child forked, pid 149154 mmap size 528384B mmap size 528384B ================================================================= ==149154==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fef5cd071f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164 #1 0x56260d5e8b8e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23 #2 0x56260d3df7a9 in thread_map__new_by_tid util/thread_map.c:63 #3 0x56260d2ac6b2 in __test__sw_clock_freq tests/sw-clock.c:65 #4 0x56260d26d8fb in run_test tests/builtin-test.c:428 #5 0x56260d26d8fb in test_and_print tests/builtin-test.c:458 #6 0x56260d26fa53 in __cmd_test tests/builtin-test.c:679 #7 0x56260d26fa53 in cmd_test tests/builtin-test.c:825 #8 0x56260d2dbb64 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #9 0x56260d165a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #10 0x56260d165a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #11 0x56260d165a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #12 0x7fef5c83cd09 in __libc_start_main ../csu/libc-start.c:308 ... test child finished with 1 ---- end ---- Software clock events period values : FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evlist and the cpu/thread maps should be released together. Otherwise following error was reported by Asan. Note that this test still has memory leaks in DSOs so it still fails even after this change. I'll take a look at that too. # perf test -v 26 26: Object code reading : --- start --- test child forked, pid 154184 Looking at the vmlinux_path (8 entries long) symsrc__init: build id mismatch for vmlinux. symsrc__init: cannot get elf header. Using /proc/kcore for kernel data Using /proc/kallsyms for symbols Parsing event 'cycles' mmap size 528384B ... ================================================================= ==154184==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fcb66e77037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x55ad9b7e821e in dso__new_id util/dso.c:1256 #2 0x55ad9b8cfd4a in __machine__addnew_vdso util/vdso.c:132 #3 0x55ad9b8cfd4a in machine__findnew_vdso util/vdso.c:347 #4 0x55ad9b845b7e in map__new util/map.c:176 #5 0x55ad9b8415a2 in machine__process_mmap2_event util/machine.c:1787 #6 0x55ad9b8fab16 in perf_tool__process_synth_event util/synthetic-events.c:64 #7 0x55ad9b8fab16 in perf_event__synthesize_mmap_events util/synthetic-events.c:499 #8 0x55ad9b8fbfdf in __event__synthesize_thread util/synthetic-events.c:741 #9 0x55ad9b8ff3e3 in perf_event__synthesize_thread_map util/synthetic-events.c:833 #10 0x55ad9b738585 in do_test_code_reading tests/code-reading.c:608 #11 0x55ad9b73b25d in test__code_reading tests/code-reading.c:722 #12 0x55ad9b6f28fb in run_test tests/builtin-test.c:428 #13 0x55ad9b6f28fb in test_and_print tests/builtin-test.c:458 #14 0x55ad9b6f4a53 in __cmd_test tests/builtin-test.c:679 #15 0x55ad9b6f4a53 in cmd_test tests/builtin-test.c:825 #16 0x55ad9b760cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #17 0x55ad9b5eaa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #18 0x55ad9b5eaa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #19 0x55ad9b5eaa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #20 0x7fcb669acd09 in __libc_start_main ../csu/libc-start.c:308 ... SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Object code reading: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evlist and the cpu/thread maps should be released together. Otherwise following error was reported by Asan. $ perf test -v 28 28: Use a dummy software event to keep tracking: --- start --- test child forked, pid 156810 mmap size 528384B ================================================================= ==156810==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f637d2bce8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55cc6295cffa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55cc6295da1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x55cc6295e1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x55cc6295e1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x55cc626287cf in test__keep_tracking tests/keep-tracking.c:84 #6 0x55cc625e38fb in run_test tests/builtin-test.c:428 #7 0x55cc625e38fb in test_and_print tests/builtin-test.c:458 #8 0x55cc625e5a53 in __cmd_test tests/builtin-test.c:679 #9 0x55cc625e5a53 in cmd_test tests/builtin-test.c:825 #10 0x55cc62651cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x55cc624dba88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x55cc624dba88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x55cc624dba88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7f637cdf2d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Use a dummy software event to keep tracking: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-7-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evlist and cpu/thread maps should be released together. Otherwise the following error was reported by Asan. $ perf test -v 35 35: Track with sched_switch : --- start --- test child forked, pid 159287 Using CPUID GenuineIntel-6-8E-C mmap size 528384B 1295 events recorded ================================================================= ==159287==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7fa28d9a2e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x5652f5a5affa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x5652f5a5ba1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x5652f5a5c1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x5652f5a5c1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x5652f5723bbf in test__switch_tracking tests/switch-tracking.c:350 #6 0x5652f56e18fb in run_test tests/builtin-test.c:428 #7 0x5652f56e18fb in test_and_print tests/builtin-test.c:458 #8 0x5652f56e3a53 in __cmd_test tests/builtin-test.c:679 #9 0x5652f56e3a53 in cmd_test tests/builtin-test.c:825 #10 0x5652f574fcc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x5652f55d9a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x5652f55d9a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x5652f55d9a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7fa28d4d8d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Track with sched_switch: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-8-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It missed to call perf_thread_map__put() after using the map. $ perf test -v 43 43: Synthesize thread map : --- start --- test child forked, pid 162640 ================================================================= ==162640==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fd48cdaa1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164 #1 0x563e6d5f8d0e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23 #2 0x563e6d3ef69a in thread_map__new_by_pid util/thread_map.c:46 #3 0x563e6d2cec90 in test__thread_map_synthesize tests/thread-map.c:97 #4 0x563e6d27d8fb in run_test tests/builtin-test.c:428 #5 0x563e6d27d8fb in test_and_print tests/builtin-test.c:458 #6 0x563e6d27fa53 in __cmd_test tests/builtin-test.c:679 #7 0x563e6d27fa53 in cmd_test tests/builtin-test.c:825 #8 0x563e6d2ebce4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #9 0x563e6d175a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #10 0x563e6d175a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #11 0x563e6d175a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #12 0x7fd48c8dfd09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 8224 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Synthesize thread map: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-9-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It should be released after printing the map. $ perf test -v 52 52: Print cpu map : --- start --- test child forked, pid 172233 ================================================================= ==172233==ERROR: LeakSanitizer: detected memory leaks Direct leak of 156 byte(s) in 1 object(s) allocated from: #0 0x7fc472518e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55e63b378f7a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55e63b37a05c in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:237 #3 0x55e63b056d16 in cpu_map_print tests/cpumap.c:102 #4 0x55e63b056d16 in test__cpu_map_print tests/cpumap.c:120 #5 0x55e63afff8fb in run_test tests/builtin-test.c:428 #6 0x55e63afff8fb in test_and_print tests/builtin-test.c:458 #7 0x55e63b001a53 in __cmd_test tests/builtin-test.c:679 #8 0x55e63b001a53 in cmd_test tests/builtin-test.c:825 #9 0x55e63b06dc44 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #10 0x55e63aef7a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #11 0x55e63aef7a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #12 0x55e63aef7a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #13 0x7fc47204ed09 in __libc_start_main ../csu/libc-start.c:308 ... SUMMARY: AddressSanitizer: 448 byte(s) leaked in 7 allocation(s). test child finished with 1 ---- end ---- Print cpu map: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-11-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It should release the maps at the end. $ perf test -v 71 71: Convert perf time to TSC : --- start --- test child forked, pid 178744 mmap size 528384B 1st event perf time 59207256505278 tsc 13187166645142 rdtsc time 59207256542151 tsc 13187166723020 2nd event perf time 59207256543749 tsc 13187166726393 ================================================================= ==178744==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7faf601f9e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55b620cfc00a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55b620cfca2f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x55b620cfd1ef in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x55b620cfd1ef in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x55b6209ef1b2 in test__perf_time_to_tsc tests/perf-time-to-tsc.c:73 #6 0x55b6209828fb in run_test tests/builtin-test.c:428 #7 0x55b6209828fb in test_and_print tests/builtin-test.c:458 #8 0x55b620984a53 in __cmd_test tests/builtin-test.c:679 #9 0x55b620984a53 in cmd_test tests/builtin-test.c:825 #10 0x55b6209f0cd4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x55b62087aa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x55b62087aa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x55b62087aa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7faf5fd2fd09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Convert perf time to TSC: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-12-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

I got a segfault when using -r option with event groups. The option makes it run the workload multiple times and it will reuse the evlist and evsel for each run. While most of resources are allocated and freed properly, the id hash in the evlist was not and it resulted in the bug. You can see it with the address sanitizer like below: $ perf stat -r 100 -e '{cycles,instructions}' true ================================================================= ==693052==ERROR: AddressSanitizer: heap-use-after-free on address 0x6080000003d0 at pc 0x558c57732835 bp 0x7fff1526adb0 sp 0x7fff1526ada8 WRITE of size 8 at 0x6080000003d0 thread T0 #0 0x558c57732834 in hlist_add_head /home/namhyung/project/linux/tools/include/linux/list.h:644 #1 0x558c57732834 in perf_evlist__id_hash /home/namhyung/project/linux/tools/lib/perf/evlist.c:237 #2 0x558c57732834 in perf_evlist__id_add /home/namhyung/project/linux/tools/lib/perf/evlist.c:244 #3 0x558c57732834 in perf_evlist__id_add_fd /home/namhyung/project/linux/tools/lib/perf/evlist.c:285 #4 0x558c5747733e in store_evsel_ids util/evsel.c:2765 #5 0x558c5747733e in evsel__store_ids util/evsel.c:2782 #6 0x558c5730b717 in __run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:895 #7 0x558c5730b717 in run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:1014 #8 0x558c5730b717 in cmd_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:2446 #9 0x558c57427c24 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #10 0x558c572b1a48 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #11 0x558c572b1a48 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #12 0x558c572b1a48 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #13 0x7fcadb9f7d09 in __libc_start_main ../csu/libc-start.c:308 #14 0x558c572b60f9 in _start (/home/namhyung/project/linux/tools/perf/perf+0x45d0f9) Actually the nodes in the hash table are struct perf_stream_id and they were freed in the previous run. Fix it by resetting the hash. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210225035148.778569-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

[ This problem is in mainline, but only rt has the chops to be able to detect it. ] Lockdep reports a circular lock dependency between serv->sv_lock and softirq_ctl.lock on system shutdown, when using a kernel built with CONFIG_PREEMPT_RT=y, and a nfs mount exists. This is due to the definition of spin_lock_bh on rt: local_bh_disable(); rt_spin_lock(lock); which forces a softirq_ctl.lock -> serv->sv_lock dependency. This is not a problem as long as _every_ lock of serv->sv_lock is a: spin_lock_bh(&serv->sv_lock); but there is one of the form: spin_lock(&serv->sv_lock); This is what is causing the circular dependency splat. The spin_lock() grabs the lock without first grabbing softirq_ctl.lock via local_bh_disable. If later on in the critical region, someone does a local_bh_disable, we get a serv->sv_lock -> softirq_ctrl.lock dependency established. Deadlock. Fix is to make serv->sv_lock be locked with spin_lock_bh everywhere, no exceptions. [ OK ] Stopped target NFS client services. Stopping Logout off all iSCSI sessions on shutdown... Stopping NFS server and services... [ 109.442380] [ 109.442385] ====================================================== [ 109.442386] WARNING: possible circular locking dependency detected [ 109.442387] 5.10.16-rt30 #1 Not tainted [ 109.442389] ------------------------------------------------------ [ 109.442390] nfsd/1032 is trying to acquire lock: [ 109.442392] ffff994237617f60 ((softirq_ctrl.lock).lock){+.+.}-{2:2}, at: __local_bh_disable_ip+0xd9/0x270 [ 109.442405] [ 109.442405] but task is already holding lock: [ 109.442406] ffff994245cb00b0 (&serv->sv_lock){+.+.}-{0:0}, at: svc_close_list+0x1f/0x90 [ 109.442415] [ 109.442415] which lock already depends on the new lock. [ 109.442415] [ 109.442416] [ 109.442416] the existing dependency chain (in reverse order) is: [ 109.442417] [ 109.442417] -> #1 (&serv->sv_lock){+.+.}-{0:0}: [ 109.442421] rt_spin_lock+0x2b/0xc0 [ 109.442428] svc_add_new_perm_xprt+0x42/0xa0 [ 109.442430] svc_addsock+0x135/0x220 [ 109.442434] write_ports+0x4b3/0x620 [ 109.442438] nfsctl_transaction_write+0x45/0x80 [ 109.442440] vfs_write+0xff/0x420 [ 109.442444] ksys_write+0x4f/0xc0 [ 109.442446] do_syscall_64+0x33/0x40 [ 109.442450] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 109.442454] [ 109.442454] -> #0 ((softirq_ctrl.lock).lock){+.+.}-{2:2}: [ 109.442457] __lock_acquire+0x1264/0x20b0 [ 109.442463] lock_acquire+0xc2/0x400 [ 109.442466] rt_spin_lock+0x2b/0xc0 [ 109.442469] __local_bh_disable_ip+0xd9/0x270 [ 109.442471] svc_xprt_do_enqueue+0xc0/0x4d0 [ 109.442474] svc_close_list+0x60/0x90 [ 109.442476] svc_close_net+0x49/0x1a0 [ 109.442478] svc_shutdown_net+0x12/0x40 [ 109.442480] nfsd_destroy+0xc5/0x180 [ 109.442482] nfsd+0x1bc/0x270 [ 109.442483] kthread+0x194/0x1b0 [ 109.442487] ret_from_fork+0x22/0x30 [ 109.442492] [ 109.442492] other info that might help us debug this: [ 109.442492] [ 109.442493] Possible unsafe locking scenario: [ 109.442493] [ 109.442493] CPU0 CPU1 [ 109.442494] ---- ---- [ 109.442495] lock(&serv->sv_lock); [ 109.442496] lock((softirq_ctrl.lock).lock); [ 109.442498] lock(&serv->sv_lock); [ 109.442499] lock((softirq_ctrl.lock).lock); [ 109.442501] [ 109.442501] *** DEADLOCK *** [ 109.442501] [ 109.442501] 3 locks held by nfsd/1032: [ 109.442503] #0: ffffffff93b49258 (nfsd_mutex){+.+.}-{3:3}, at: nfsd+0x19a/0x270 [ 109.442508] #1: ffff994245cb00b0 (&serv->sv_lock){+.+.}-{0:0}, at: svc_close_list+0x1f/0x90 [ 109.442512] #2: ffffffff93a81b20 (rcu_read_lock){....}-{1:2}, at: rt_spin_lock+0x5/0xc0 [ 109.442518] [ 109.442518] stack backtrace: [ 109.442519] CPU: 0 PID: 1032 Comm: nfsd Not tainted 5.10.16-rt30 #1 [ 109.442522] Hardware name: Supermicro X9DRL-3F/iF/X9DRL-3F/iF, BIOS 3.2 09/22/2015 [ 109.442524] Call Trace: [ 109.442527] dump_stack+0x77/0x97 [ 109.442533] check_noncircular+0xdc/0xf0 [ 109.442546] __lock_acquire+0x1264/0x20b0 [ 109.442553] lock_acquire+0xc2/0x400 [ 109.442564] rt_spin_lock+0x2b/0xc0 [ 109.442570] __local_bh_disable_ip+0xd9/0x270 [ 109.442573] svc_xprt_do_enqueue+0xc0/0x4d0 [ 109.442577] svc_close_list+0x60/0x90 [ 109.442581] svc_close_net+0x49/0x1a0 [ 109.442585] svc_shutdown_net+0x12/0x40 [ 109.442588] nfsd_destroy+0xc5/0x180 [ 109.442590] nfsd+0x1bc/0x270 [ 109.442595] kthread+0x194/0x1b0 [ 109.442600] ret_from_fork+0x22/0x30 [ 109.518225] nfsd: last server has exited, flushing export cache [ OK ] Stopped NFSv4 ID-name mapping service. [ OK ] Stopped GSSAPI Proxy Daemon. [ OK ] Stopped NFS Mount Daemon. [ OK ] Stopped NFS status monitor for NFSv2/3 locking.. Fixes: 719f8bc ("svcrpc: fix xpt_list traversal locking on shutdown") Signed-off-by: Joe Korty <joe.korty@concurrent-rt.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

afs_listxattr() lists all the available special afs xattrs (i.e. those in the "afs.*" space), no matter what type of server we're dealing with. But OpenAFS servers, for example, cannot deal with some of the extra-capable attributes that AuriStor (YFS) servers provide. Unfortunately, the presence of the afs.yfs.* attributes causes errors[1] for anything that tries to read them if the server is of the wrong type. Fix the problem by removing afs_listxattr() so that none of the special xattrs are listed (AFS doesn't support xattrs). It does mean, however, that getfattr won't list them, though they can still be accessed with getxattr() and setxattr(). This can be tested with something like: getfattr -d -m ".*" /afs/example.com/path/to/file With this change, none of the afs.* attributes should be visible. Changes: ver #2: - Hide all of the afs.* xattrs, not just the ACL ones. Fixes: ae46578 ("afs: Get YFS ACLs and information through xattrs") Reported-by: Gaja Sophie Peters <gaja.peters@math.uni-hamburg.de> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Gaja Sophie Peters <gaja.peters@math.uni-hamburg.de> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003502.html [1] Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003567.html # v1 Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003573.html # v2

Recent changes changed the completion of SCSI commands from Soft-IRQ context to IRQ context. This triggers the following warning, when we're completing writes to zoned block devices that go through the zone append emulation: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc2+ #2 Hardware name: Supermicro Super Server/X10SRL-F, BIOS 2.0 12/17/2015 RIP: 0010:__local_bh_disable_ip+0x3f/0x50 RSP: 0018:ffff8883e1409ba8 EFLAGS: 00010006 RAX: 0000000080010001 RBX: 0000000000000001 RCX: 0000000000000013 RDX: ffff888129e4d200 RSI: 0000000000000201 RDI: ffffffff915b9dbd RBP: ffff888113e9a540 R08: ffff888113e9a540 R09: 00000000000077f0 R10: 0000000000080000 R11: 0000000000000001 R12: ffff888129e4d200 R13: 0000000000001000 R14: 00000000000077f0 R15: ffff888129e4d218 FS: 0000000000000000(0000) GS:ffff8883e1400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2f8418ebc0 CR3: 000000021202a006 CR4: 00000000001706f0 Call Trace: <IRQ> _raw_spin_lock_bh+0x18/0x40 sd_zbc_complete+0x43d/0x1150 sd_done+0x631/0x1040 ? mark_lock+0xe4/0x2fd0 ? provisioning_mode_store+0x3f0/0x3f0 scsi_finish_command+0x31b/0x5c0 _scsih_io_done+0x960/0x29e0 [mpt3sas] ? mpt3sas_scsih_scsi_lookup_get+0x1c7/0x340 [mpt3sas] ? __lock_acquire+0x166b/0x58b0 ? _get_st_from_smid+0x4a/0x80 [mpt3sas] _base_process_reply_queue+0x23f/0x26e0 [mpt3sas] ? lock_is_held_type+0x98/0x110 ? find_held_lock+0x2c/0x110 ? mpt3sas_base_sync_reply_irqs+0x360/0x360 [mpt3sas] _base_interrupt+0x8d/0xd0 [mpt3sas] ? rcu_read_lock_sched_held+0x3f/0x70 __handle_irq_event_percpu+0x24d/0x600 handle_irq_event+0xef/0x240 ? handle_irq_event_percpu+0x110/0x110 handle_edge_irq+0x1f6/0xb60 __common_interrupt+0x75/0x160 common_interrupt+0x7b/0xa0 </IRQ> asm_common_interrupt+0x1e/0x40 Don't use spin_lock_bh() to protect the update of the write pointer offset cache, but use spin_lock_irqsave() for it. Link: https://lore.kernel.org/r/3cfebe48d09db73041b7849be71ffbcec7ee40b3.1615369586.git.johannes.thumshirn@wdc.com Fixes: 664f0dc ("scsi: mpt3sas: Add support for shared host tagset for CPU hotplug") Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Starting with commit f295c8c ("drm/nouveau: fix dma syncing warning with debugging on.") the following oops occures: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 1013 Comm: Xorg.bin Tainted: G E 5.11.0-desktop-rc0+ #2 Hardware name: Acer Aspire VN7-593G/Pluto_KLS, BIOS V1.11 08/01/2018 RIP: 0010:nouveau_bo_sync_for_device+0x40/0xb0 [nouveau] Call Trace: nouveau_bo_validate+0x5d/0x80 [nouveau] nouveau_gem_ioctl_pushbuf+0x662/0x1120 [nouveau] ? nouveau_gem_ioctl_new+0xf0/0xf0 [nouveau] drm_ioctl_kernel+0xa6/0xf0 [drm] drm_ioctl+0x1f4/0x3a0 [drm] ? nouveau_gem_ioctl_new+0xf0/0xf0 [nouveau] nouveau_drm_ioctl+0x50/0xa0 [nouveau] __x64_sys_ioctl+0x7e/0xb0 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae ---[ end trace ccfb1e7f4064374f ]--- RIP: 0010:nouveau_bo_sync_for_device+0x40/0xb0 [nouveau] The underlying problem is not introduced by the commit, yet it uncovered the underlying issue. The cited commit relies on valid pages. This is not given for due to some bugs. For now, just warn and work around the issue by just ignoring the bad ttm objects. Below is some debug info gathered while debugging this issue: nouveau 0000:01:00.0: DRM: ttm_dma->num_pages: 2048 nouveau 0000:01:00.0: DRM: ttm_dma->pages is NULL nouveau 0000:01:00.0: DRM: ttm_dma: 00000000e96058e7 nouveau 0000:01:00.0: DRM: ttm_dma->page_flags: nouveau 0000:01:00.0: DRM: ttm_dma: Populated: 1 nouveau 0000:01:00.0: DRM: ttm_dma: No Retry: 0 nouveau 0000:01:00.0: DRM: ttm_dma: SG: 256 nouveau 0000:01:00.0: DRM: ttm_dma: Zero Alloc: 0 nouveau 0000:01:00.0: DRM: ttm_dma: Swapped: 0 Signed-off-by: Tobias Klausmann <tobias.klausmann@freenet.de> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210313222159.3346-1-tobias.klausmann@freenet.de

I got several memory leak reports from Asan with a simple command. It was because VDSO is not released due to the refcount. Like in __dsos_addnew_id(), it should put the refcount after adding to the list. $ perf record true [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ] ================================================================= ==692599==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce4aa8ee in dso__new_id util/dso.c:1256 #2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132 #3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347 #4 0x559bce50826c in map__new util/map.c:175 #5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #6 0x559bce512f6b in machines__deliver_event util/session.c:1481 #7 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #8 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #10 0x559bce519bea in __perf_session__process_events util/session.c:2268 #11 0x559bce519bea in perf_session__process_events util/session.c:2297 #12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 Indirect leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce520907 in nsinfo__copy util/namespaces.c:169 #2 0x559bce50821b in map__new util/map.c:168 #3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #4 0x559bce512f6b in machines__deliver_event util/session.c:1481 #5 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #6 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #8 0x559bce519bea in __perf_session__process_events util/session.c:2268 #9 0x559bce519bea in perf_session__process_events util/session.c:2297 #10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210315045641.700430-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Ido Schimmel says: ==================== mlxsw: spectrum: Fix ECN marking in tunnel decapsulation Patch #1 fixes a discrepancy between the software and hardware data paths with regards to ECN marking after decapsulation. See the changelog for a detailed description. Patch #2 extends the ECN decap test to cover all possible combinations of inner and outer ECN markings. The test passes over both data paths. v2: * Only set ECT(1) if inner is ECT(0) * Introduce a new helper to determine inner ECN. Share it between NVE and IP-in-IP tunnels * Extend the selftest ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Danielle Ratson says: ==================== Fix link_mode derived params functionality Currently, link_mode parameter derives 3 other link parameters, speed, lanes and duplex, and the derived information is sent to user space. Few bugs were found in that functionality. First, some drivers clear the 'ethtool_link_ksettings' struct in their get_link_ksettings() callback and cause receiving wrong link mode information in user space. And also, some drivers can report random values in the 'link_mode' field and cause general protection fault. Second, the link parameters are only derived in netlink path so in ioctl path, we don't any reasonable values. Third, setting 'speed 10000 lanes 1' fails since the lanes parameter wasn't set for ETHTOOL_LINK_MODE_10000baseR_FEC_BIT. Patch #1 solves the first two problems by removing link_mode parameter and deriving the link parameters in driver instead of ethtool. Patch #2 solves the third one, by setting the lanes parameter for the link_mode. v3: * Remove the link_mode parameter in the first patch to solve both two issues from patch#1 and patch#2. * Add the second patch to solve the third issue. v2: * Add patch #2. * Introduce 'cap_link_mode_supported' instead of adding a validity field to 'ethtool_link_ksettings' struct in patch #1. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

The following deadlock is detected: truncate -> setattr path is waiting for pending direct IO to be done (inode->i_dio_count become zero) with inode->i_rwsem held (down_write). PID: 14827 TASK: ffff881686a9af80 CPU: 20 COMMAND: "ora_p005_hrltd9" #0 __schedule at ffffffff818667cc #1 schedule at ffffffff81866de6 #2 inode_dio_wait at ffffffff812a2d04 #3 ocfs2_setattr at ffffffffc05f322e [ocfs2] #4 notify_change at ffffffff812a5a09 #5 do_truncate at ffffffff812808f5 #6 do_sys_ftruncate.constprop.18 at ffffffff81280cf2 #7 sys_ftruncate at ffffffff81280d8e #8 do_syscall_64 at ffffffff81003949 #9 entry_SYSCALL_64_after_hwframe at ffffffff81a001ad dio completion path is going to complete one direct IO (decrement inode->i_dio_count), but before that it hung at locking inode->i_rwsem: #0 __schedule+700 at ffffffff818667cc #1 schedule+54 at ffffffff81866de6 #2 rwsem_down_write_failed+536 at ffffffff8186aa28 #3 call_rwsem_down_write_failed+23 at ffffffff8185a1b7 #4 down_write+45 at ffffffff81869c9d #5 ocfs2_dio_end_io_write+180 at ffffffffc05d5444 [ocfs2] #6 ocfs2_dio_end_io+85 at ffffffffc05d5a85 [ocfs2] #7 dio_complete+140 at ffffffff812c873c #8 dio_aio_complete_work+25 at ffffffff812c89f9 #9 process_one_work+361 at ffffffff810b1889 #10 worker_thread+77 at ffffffff810b233d #11 kthread+261 at ffffffff810b7fd5 #12 ret_from_fork+62 at ffffffff81a0035e Thus above forms ABBA deadlock. The same deadlock was mentioned in upstream commit 28f5a8a ("ocfs2: should wait dio before inode lock in ocfs2_setattr()"). It seems that that commit only removed the cluster lock (the victim of above dead lock) from the ABBA deadlock party. End-user visible effects: Process hang in truncate -> ocfs2_setattr path and other processes hang at ocfs2_dio_end_io_write path. This is to fix the deadlock itself. It removes inode_lock() call from dio completion path to remove the deadlock and add ip_alloc_sem lock in setattr path to synchronize the inode modifications. [wen.gang.wang@oracle.com: remove the "had_alloc_lock" as suggested] Link: https://lkml.kernel.org/r/20210402171344.1605-1-wen.gang.wang@oracle.com Link: https://lkml.kernel.org/r/20210331203654.3911-1-wen.gang.wang@oracle.com Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

An out of bounds write happens when setting the default power state. KASAN sees this as: [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 ================================================================== BUG: KASAN: slab-out-of-bounds in radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon] Write of size 4 at addr ffff88810178d858 by task systemd-udevd/157 CPU: 0 PID: 157 Comm: systemd-udevd Not tainted 5.12.0-E620 #50 Hardware name: eMachines eMachines E620 /Nile , BIOS V1.03 09/30/2008 Call Trace: dump_stack+0xa5/0xe6 print_address_description.constprop.0+0x18/0x239 kasan_report+0x170/0x1a8 radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon] radeon_atombios_get_power_modes+0x144/0x1888 [radeon] radeon_pm_init+0x1019/0x1904 [radeon] rs690_init+0x76e/0x84a [radeon] radeon_device_init+0x1c1a/0x21e5 [radeon] radeon_driver_load_kms+0xf5/0x30b [radeon] drm_dev_register+0x255/0x4a0 [drm] radeon_pci_probe+0x246/0x2f6 [radeon] pci_device_probe+0x1aa/0x294 really_probe+0x30e/0x850 driver_probe_device+0xe6/0x135 device_driver_attach+0xc1/0xf8 __driver_attach+0x13f/0x146 bus_for_each_dev+0xfa/0x146 bus_add_driver+0x2b3/0x447 driver_register+0x242/0x2c1 do_one_initcall+0x149/0x2fd do_init_module+0x1ae/0x573 load_module+0x4dee/0x5cca __do_sys_finit_module+0xf1/0x140 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Without KASAN, this will manifest later when the kernel attempts to allocate memory that was stomped, since it collides with the inline slab freelist pointer: invalid opcode: 0000 [#1] SMP NOPTI CPU: 0 PID: 781 Comm: openrc-run.sh Tainted: G W 5.10.12-gentoo-E620 #2 Hardware name: eMachines eMachines E620 /Nile , BIOS V1.03 09/30/2008 RIP: 0010:kfree+0x115/0x230 Code: 89 c5 e8 75 ea ff ff 48 8b 00 0f ba e0 09 72 63 e8 1f f4 ff ff 41 89 c4 48 8b 45 00 0f ba e0 10 72 0a 48 8b 45 08 a8 01 75 02 <0f> 0b 44 89 e1 48 c7 c2 00 f0 ff ff be 06 00 00 00 48 d3 e2 48 c7 RSP: 0018:ffffb42f40267e10 EFLAGS: 00010246 RAX: ffffd61280ee8d88 RBX: 0000000000000004 RCX: 000000008010000d RDX: 4000000000000000 RSI: ffffffffba1360b0 RDI: ffffd61280ee8d80 RBP: ffffd61280ee8d80 R08: ffffffffb91bebdf R09: 0000000000000000 R10: ffff8fe2c1047ac8 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000100 FS: 00007fe80eff6b68(0000) GS:ffff8fe339c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe80eec7bc0 CR3: 0000000038012000 CR4: 00000000000006f0 Call Trace: __free_fdtable+0x16/0x1f put_files_struct+0x81/0x9b do_exit+0x433/0x94d do_group_exit+0xa6/0xa6 __x64_sys_exit_group+0xf/0xf do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fe80ef64bea Code: Unable to access opcode bytes at RIP 0x7fe80ef64bc0. RSP: 002b:00007ffdb1c47528 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fe80ef64bea RDX: 00007fe80ef64f60 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 00007fe80ee2c620 R11: 0000000000000246 R12: 00007fe80eff41e0 R13: 00000000ffffffff R14: 0000000000000024 R15: 00007fe80edf9cd0 Modules linked in: radeon(+) ath5k(+) snd_hda_codec_realtek ... Use a valid power_state index when initializing the "flags" and "misc" and "misc2" fields. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211537 Reported-by: Erhard F. <erhard_f@mailbox.org> Fixes: a48b9b4 ("drm/radeon/kms/pm: add asic specific callbacks for getting power state (v2)") Fixes: 79daedc ("drm/radeon/kms: minor pm cleanups") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We get a bug: BUG: KASAN: slab-out-of-bounds in iov_iter_revert+0x11c/0x404 lib/iov_iter.c:1139 Read of size 8 at addr ffff0000d3fb11f8 by task CPU: 0 PID: 12582 Comm: syz-executor.2 Not tainted 5.10.0-00843-g352c8610ccd2 #2 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2d0 arch/arm64/kernel/stacktrace.c:132 show_stack+0x28/0x34 arch/arm64/kernel/stacktrace.c:196 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x110/0x164 lib/dump_stack.c:118 print_address_description+0x78/0x5c8 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report+0x148/0x1e4 mm/kasan/report.c:562 check_memory_region_inline mm/kasan/generic.c:183 [inline] __asan_load8+0xb4/0xbc mm/kasan/generic.c:252 iov_iter_revert+0x11c/0x404 lib/iov_iter.c:1139 io_read fs/io_uring.c:3421 [inline] io_issue_sqe+0x2344/0x2d64 fs/io_uring.c:5943 __io_queue_sqe+0x19c/0x520 fs/io_uring.c:6260 io_queue_sqe+0x2a4/0x590 fs/io_uring.c:6326 io_submit_sqe fs/io_uring.c:6395 [inline] io_submit_sqes+0x4c0/0xa04 fs/io_uring.c:6624 __do_sys_io_uring_enter fs/io_uring.c:9013 [inline] __se_sys_io_uring_enter fs/io_uring.c:8960 [inline] __arm64_sys_io_uring_enter+0x190/0x708 fs/io_uring.c:8960 __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline] invoke_syscall arch/arm64/kernel/syscall.c:48 [inline] el0_svc_common arch/arm64/kernel/syscall.c:158 [inline] do_el0_svc+0x120/0x290 arch/arm64/kernel/syscall.c:227 el0_svc+0x1c/0x28 arch/arm64/kernel/entry-common.c:367 el0_sync_handler+0x98/0x170 arch/arm64/kernel/entry-common.c:383 el0_sync+0x140/0x180 arch/arm64/kernel/entry.S:670 Allocated by task 12570: stack_trace_save+0x80/0xb8 kernel/stacktrace.c:121 kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc+0xdc/0x120 mm/kasan/common.c:461 kasan_kmalloc+0xc/0x14 mm/kasan/common.c:475 __kmalloc+0x23c/0x334 mm/slub.c:3970 kmalloc include/linux/slab.h:557 [inline] __io_alloc_async_data+0x68/0x9c fs/io_uring.c:3210 io_setup_async_rw fs/io_uring.c:3229 [inline] io_read fs/io_uring.c:3436 [inline] io_issue_sqe+0x2954/0x2d64 fs/io_uring.c:5943 __io_queue_sqe+0x19c/0x520 fs/io_uring.c:6260 io_queue_sqe+0x2a4/0x590 fs/io_uring.c:6326 io_submit_sqe fs/io_uring.c:6395 [inline] io_submit_sqes+0x4c0/0xa04 fs/io_uring.c:6624 __do_sys_io_uring_enter fs/io_uring.c:9013 [inline] __se_sys_io_uring_enter fs/io_uring.c:8960 [inline] __arm64_sys_io_uring_enter+0x190/0x708 fs/io_uring.c:8960 __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline] invoke_syscall arch/arm64/kernel/syscall.c:48 [inline] el0_svc_common arch/arm64/kernel/syscall.c:158 [inline] do_el0_svc+0x120/0x290 arch/arm64/kernel/syscall.c:227 el0_svc+0x1c/0x28 arch/arm64/kernel/entry-common.c:367 el0_sync_handler+0x98/0x170 arch/arm64/kernel/entry-common.c:383 el0_sync+0x140/0x180 arch/arm64/kernel/entry.S:670 Freed by task 12570: stack_trace_save+0x80/0xb8 kernel/stacktrace.c:121 kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x38/0x6c mm/kasan/common.c:56 kasan_set_free_info+0x20/0x40 mm/kasan/generic.c:355 __kasan_slab_free+0x124/0x150 mm/kasan/common.c:422 kasan_slab_free+0x10/0x1c mm/kasan/common.c:431 slab_free_hook mm/slub.c:1544 [inline] slab_free_freelist_hook mm/slub.c:1577 [inline] slab_free mm/slub.c:3142 [inline] kfree+0x104/0x38c mm/slub.c:4124 io_dismantle_req fs/io_uring.c:1855 [inline] __io_free_req+0x70/0x254 fs/io_uring.c:1867 io_put_req_find_next fs/io_uring.c:2173 [inline] __io_queue_sqe+0x1fc/0x520 fs/io_uring.c:6279 __io_req_task_submit+0x154/0x21c fs/io_uring.c:2051 io_req_task_submit+0x2c/0x44 fs/io_uring.c:2063 task_work_run+0xdc/0x128 kernel/task_work.c:151 get_signal+0x6f8/0x980 kernel/signal.c:2562 do_signal+0x108/0x3a4 arch/arm64/kernel/signal.c:658 do_notify_resume+0xbc/0x25c arch/arm64/kernel/signal.c:722 work_pending+0xc/0x180 blkdev_read_iter can truncate iov_iter's count since the count + pos may exceed the size of the blkdev. This will confuse io_read that we have consume the iovec. And once we do the iov_iter_revert in io_read, we will trigger the slab-out-of-bounds. Fix it by reexpand the count with size has been truncated. blkdev_write_iter can trigger the problem too. Signed-off-by: yangerkun <yangerkun@huawei.com> Acked-by: Pavel Begunkov <asml.silencec@gmail.com> Link: https://lore.kernel.org/r/20210401071807.3328235-1-yangerkun@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>

The FSM can run in a circle allowing rdma_resolve_ip() to be called twice on the same id_priv. While this cannot happen without going through the work, it violates the invariant that the same address resolution background request cannot be active twice. CPU 1 CPU 2 rdma_resolve_addr(): RDMA_CM_IDLE -> RDMA_CM_ADDR_QUERY rdma_resolve_ip(addr_handler) #1 process_one_req(): for #1 addr_handler(): RDMA_CM_ADDR_QUERY -> RDMA_CM_ADDR_BOUND mutex_unlock(&id_priv->handler_mutex); [.. handler still running ..] rdma_resolve_addr(): RDMA_CM_ADDR_BOUND -> RDMA_CM_ADDR_QUERY rdma_resolve_ip(addr_handler) !! two requests are now on the req_list rdma_destroy_id(): destroy_id_handler_unlock(): _destroy_id(): cma_cancel_operation(): rdma_addr_cancel() // process_one_req() self removes it spin_lock_bh(&lock); cancel_delayed_work(&req->work); if (!list_empty(&req->list)) == true ! rdma_addr_cancel() returns after process_on_req #1 is done kfree(id_priv) process_one_req(): for #2 addr_handler(): mutex_lock(&id_priv->handler_mutex); !! Use after free on id_priv rdma_addr_cancel() expects there to be one req on the list and only cancels the first one. The self-removal behavior of the work only happens after the handler has returned. This yields a situations where the req_list can have two reqs for the same "handle" but rdma_addr_cancel() only cancels the first one. The second req remains active beyond rdma_destroy_id() and will use-after-free id_priv once it inevitably triggers. Fix this by remembering if the id_priv has called rdma_resolve_ip() and always cancel before calling it again. This ensures the req_list never gets more than one item in it and doesn't cost anything in the normal flow that never uses this strange error path. Link: https://lore.kernel.org/r/0-v1-3bc675b8006d+22-syz_cancel_uaf_jgg@nvidia.com Cc: stable@vger.kernel.org Fixes: e51060f ("IB: IP address based RDMA connection manager") Reported-by: syzbot+dc3dfba010d7671e05f5@syzkaller.appspotmail.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Syzkaller reported a false positive deadlock involving the nl socket lock and the subflow socket lock: MPTCP: kernel_bind error, err=-98 ============================================ WARNING: possible recursive locking detected 5.15.0-rc1-syzkaller #0 Not tainted -------------------------------------------- syz-executor998/6520 is trying to acquire lock: ffff8880795718a0 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x267/0x7b0 net/mptcp/protocol.c:2738 but task is already holding lock: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1612 [inline] ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x23/0x7b0 net/mptcp/protocol.c:2720 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(k-sk_lock-AF_INET); lock(k-sk_lock-AF_INET); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by syz-executor998/6520: #0: ffffffff8d176c50 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 net/netlink/genetlink.c:802 #1: ffffffff8d176d08 (genl_mutex){+.+.}-{3:3}, at: genl_lock net/netlink/genetlink.c:33 [inline] #1: ffffffff8d176d08 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg+0x3e0/0x580 net/netlink/genetlink.c:790 #2: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1612 [inline] #2: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x23/0x7b0 net/mptcp/protocol.c:2720 stack backtrace: CPU: 1 PID: 6520 Comm: syz-executor998 Not tainted 5.15.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_deadlock_bug kernel/locking/lockdep.c:2944 [inline] check_deadlock kernel/locking/lockdep.c:2987 [inline] validate_chain kernel/locking/lockdep.c:3776 [inline] __lock_acquire.cold+0x149/0x3ab kernel/locking/lockdep.c:5015 lock_acquire kernel/locking/lockdep.c:5625 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5590 lock_sock_fast+0x36/0x100 net/core/sock.c:3229 mptcp_close+0x267/0x7b0 net/mptcp/protocol.c:2738 inet_release+0x12e/0x280 net/ipv4/af_inet.c:431 __sock_release net/socket.c:649 [inline] sock_release+0x87/0x1b0 net/socket.c:677 mptcp_pm_nl_create_listen_socket+0x238/0x2c0 net/mptcp/pm_netlink.c:900 mptcp_nl_cmd_add_addr+0x359/0x930 net/mptcp/pm_netlink.c:1170 genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:731 genl_family_rcv_msg net/netlink/genetlink.c:775 [inline] genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:792 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 genl_rcv+0x24/0x40 net/netlink/genetlink.c:803 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_no_sendpage+0x101/0x150 net/core/sock.c:2980 kernel_sendpage.part.0+0x1a0/0x340 net/socket.c:3504 kernel_sendpage net/socket.c:3501 [inline] sock_sendpage+0xe5/0x140 net/socket.c:1003 pipe_to_sendpage+0x2ad/0x380 fs/splice.c:364 splice_from_pipe_feed fs/splice.c:418 [inline] __splice_from_pipe+0x43e/0x8a0 fs/splice.c:562 splice_from_pipe fs/splice.c:597 [inline] generic_splice_sendpage+0xd4/0x140 fs/splice.c:746 do_splice_from fs/splice.c:767 [inline] direct_splice_actor+0x110/0x180 fs/splice.c:936 splice_direct_to_actor+0x34b/0x8c0 fs/splice.c:891 do_splice_direct+0x1b3/0x280 fs/splice.c:979 do_sendfile+0xae9/0x1240 fs/read_write.c:1249 __do_sys_sendfile64 fs/read_write.c:1314 [inline] __se_sys_sendfile64 fs/read_write.c:1300 [inline] __x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1300 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f215cb69969 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc96bb3868 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 00007f215cbad072 RCX: 00007f215cb69969 RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000005 RBP: 0000000000000000 R08: 00007ffc96bb3a08 R09: 00007ffc96bb3a08 R10: 0000000100000002 R11: 0000000000000246 R12: 00007ffc96bb387c R13: 431bde82d7b634db R14: 0000000000000000 R15: 0000000000000000 the problem originates from uncorrect lock annotation in the mptcp code and is only visible since commit 2dcb96b ("net: core: Correct the sock::sk_lock.owned lockdep annotations"), but is present since the port-based endpoint support initial implementation. This patch addresses the issue introducing a nested variant of lock_sock_fast() and using it in the relevant code path. Fixes: 1729cf1 ("mptcp: create the listening socket for new port") Fixes: 2dcb96b ("net: core: Correct the sock::sk_lock.owned lockdep annotations") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Reported-and-tested-by: syzbot+1dd53f7a89b299d59eaf@syzkaller.appspotmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>

Patch that refactored fl_walk() to use idr_for_each_entry_continue_ul() also removed rcu protection of individual filters which causes following use-after-free when filter is deleted concurrently. Fix fl_walk() to obtain rcu read lock while iterating and taking the filter reference and temporary release the lock while calling arg->fn() callback that can sleep. KASAN trace: [ 352.773640] ================================================================== [ 352.775041] BUG: KASAN: use-after-free in fl_walk+0x159/0x240 [cls_flower] [ 352.776304] Read of size 4 at addr ffff8881c8251480 by task tc/2987 [ 352.777862] CPU: 3 PID: 2987 Comm: tc Not tainted 5.15.0-rc2+ #2 [ 352.778980] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 352.781022] Call Trace: [ 352.781573] dump_stack_lvl+0x46/0x5a [ 352.782332] print_address_description.constprop.0+0x1f/0x140 [ 352.783400] ? fl_walk+0x159/0x240 [cls_flower] [ 352.784292] ? fl_walk+0x159/0x240 [cls_flower] [ 352.785138] kasan_report.cold+0x83/0xdf [ 352.785851] ? fl_walk+0x159/0x240 [cls_flower] [ 352.786587] kasan_check_range+0x145/0x1a0 [ 352.787337] fl_walk+0x159/0x240 [cls_flower] [ 352.788163] ? fl_put+0x10/0x10 [cls_flower] [ 352.789007] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.790102] tcf_chain_dump+0x231/0x450 [ 352.790878] ? tcf_chain_tp_delete_empty+0x170/0x170 [ 352.791833] ? __might_sleep+0x2e/0xc0 [ 352.792594] ? tfilter_notify+0x170/0x170 [ 352.793400] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.794477] tc_dump_tfilter+0x385/0x4b0 [ 352.795262] ? tc_new_tfilter+0x1180/0x1180 [ 352.796103] ? __mod_node_page_state+0x1f/0xc0 [ 352.796974] ? __build_skb_around+0x10e/0x130 [ 352.797826] netlink_dump+0x2c0/0x560 [ 352.798563] ? netlink_getsockopt+0x430/0x430 [ 352.799433] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.800542] __netlink_dump_start+0x356/0x440 [ 352.801397] rtnetlink_rcv_msg+0x3ff/0x550 [ 352.802190] ? tc_new_tfilter+0x1180/0x1180 [ 352.802872] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 352.803668] ? tc_new_tfilter+0x1180/0x1180 [ 352.804344] ? _copy_from_iter_nocache+0x800/0x800 [ 352.805202] ? kasan_set_track+0x1c/0x30 [ 352.805900] netlink_rcv_skb+0xc6/0x1f0 [ 352.806587] ? rht_deferred_worker+0x6b0/0x6b0 [ 352.807455] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 352.808324] ? netlink_ack+0x4d0/0x4d0 [ 352.809086] ? netlink_deliver_tap+0x62/0x3d0 [ 352.809951] netlink_unicast+0x353/0x480 [ 352.810744] ? netlink_attachskb+0x430/0x430 [ 352.811586] ? __alloc_skb+0xd7/0x200 [ 352.812349] netlink_sendmsg+0x396/0x680 [ 352.813132] ? netlink_unicast+0x480/0x480 [ 352.813952] ? __import_iovec+0x192/0x210 [ 352.814759] ? netlink_unicast+0x480/0x480 [ 352.815580] sock_sendmsg+0x6c/0x80 [ 352.816299] ____sys_sendmsg+0x3a5/0x3c0 [ 352.817096] ? kernel_sendmsg+0x30/0x30 [ 352.817873] ? __ia32_sys_recvmmsg+0x150/0x150 [ 352.818753] ___sys_sendmsg+0xd8/0x140 [ 352.819518] ? sendmsg_copy_msghdr+0x110/0x110 [ 352.820402] ? ___sys_recvmsg+0xf4/0x1a0 [ 352.821110] ? __copy_msghdr_from_user+0x260/0x260 [ 352.821934] ? _raw_spin_lock+0x81/0xd0 [ 352.822680] ? __handle_mm_fault+0xef3/0x1b20 [ 352.823549] ? rb_insert_color+0x2a/0x270 [ 352.824373] ? copy_page_range+0x16b0/0x16b0 [ 352.825209] ? perf_event_update_userpage+0x2d0/0x2d0 [ 352.826190] ? __fget_light+0xd9/0xf0 [ 352.826941] __sys_sendmsg+0xb3/0x130 [ 352.827613] ? __sys_sendmsg_sock+0x20/0x20 [ 352.828377] ? do_user_addr_fault+0x2c5/0x8a0 [ 352.829184] ? fpregs_assert_state_consistent+0x52/0x60 [ 352.830001] ? exit_to_user_mode_prepare+0x32/0x160 [ 352.830845] do_syscall_64+0x35/0x80 [ 352.831445] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 352.832331] RIP: 0033:0x7f7bee973c17 [ 352.833078] Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 352.836202] RSP: 002b:00007ffcbb368e28 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 352.837524] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7bee973c17 [ 352.838715] RDX: 0000000000000000 RSI: 00007ffcbb368e50 RDI: 0000000000000003 [ 352.839838] RBP: 00007ffcbb36d090 R08: 00000000cea96d79 R09: 00007f7beea34a40 [ 352.841021] R10: 00000000004059bb R11: 0000000000000246 R12: 000000000046563f [ 352.842208] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffcbb36d088 [ 352.843784] Allocated by task 2960: [ 352.844451] kasan_save_stack+0x1b/0x40 [ 352.845173] __kasan_kmalloc+0x7c/0x90 [ 352.845873] fl_change+0x282/0x22db [cls_flower] [ 352.846696] tc_new_tfilter+0x6cf/0x1180 [ 352.847493] rtnetlink_rcv_msg+0x471/0x550 [ 352.848323] netlink_rcv_skb+0xc6/0x1f0 [ 352.849097] netlink_unicast+0x353/0x480 [ 352.849886] netlink_sendmsg+0x396/0x680 [ 352.850678] sock_sendmsg+0x6c/0x80 [ 352.851398] ____sys_sendmsg+0x3a5/0x3c0 [ 352.852202] ___sys_sendmsg+0xd8/0x140 [ 352.852967] __sys_sendmsg+0xb3/0x130 [ 352.853718] do_syscall_64+0x35/0x80 [ 352.854457] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 352.855830] Freed by task 7: [ 352.856421] kasan_save_stack+0x1b/0x40 [ 352.857139] kasan_set_track+0x1c/0x30 [ 352.857854] kasan_set_free_info+0x20/0x30 [ 352.858609] __kasan_slab_free+0xed/0x130 [ 352.859348] kfree+0xa7/0x3c0 [ 352.859951] process_one_work+0x44d/0x780 [ 352.860685] worker_thread+0x2e2/0x7e0 [ 352.861390] kthread+0x1f4/0x220 [ 352.862022] ret_from_fork+0x1f/0x30 [ 352.862955] Last potentially related work creation: [ 352.863758] kasan_save_stack+0x1b/0x40 [ 352.864378] kasan_record_aux_stack+0xab/0xc0 [ 352.865028] insert_work+0x30/0x160 [ 352.865617] __queue_work+0x351/0x670 [ 352.866261] rcu_work_rcufn+0x30/0x40 [ 352.866917] rcu_core+0x3b2/0xdb0 [ 352.867561] __do_softirq+0xf6/0x386 [ 352.868708] Second to last potentially related work creation: [ 352.869779] kasan_save_stack+0x1b/0x40 [ 352.870560] kasan_record_aux_stack+0xab/0xc0 [ 352.871426] call_rcu+0x5f/0x5c0 [ 352.872108] queue_rcu_work+0x44/0x50 [ 352.872855] __fl_put+0x17c/0x240 [cls_flower] [ 352.873733] fl_delete+0xc7/0x100 [cls_flower] [ 352.874607] tc_del_tfilter+0x510/0xb30 [ 352.886085] rtnetlink_rcv_msg+0x471/0x550 [ 352.886875] netlink_rcv_skb+0xc6/0x1f0 [ 352.887636] netlink_unicast+0x353/0x480 [ 352.888285] netlink_sendmsg+0x396/0x680 [ 352.888942] sock_sendmsg+0x6c/0x80 [ 352.889583] ____sys_sendmsg+0x3a5/0x3c0 [ 352.890311] ___sys_sendmsg+0xd8/0x140 [ 352.891019] __sys_sendmsg+0xb3/0x130 [ 352.891716] do_syscall_64+0x35/0x80 [ 352.892395] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 352.893666] The buggy address belongs to the object at ffff8881c8251000 which belongs to the cache kmalloc-2k of size 2048 [ 352.895696] The buggy address is located 1152 bytes inside of 2048-byte region [ffff8881c8251000, ffff8881c8251800) [ 352.897640] The buggy address belongs to the page: [ 352.898492] page:00000000213bac35 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1c8250 [ 352.900110] head:00000000213bac35 order:3 compound_mapcount:0 compound_pincount:0 [ 352.901541] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff) [ 352.902908] raw: 002ffff800010200 0000000000000000 dead000000000122 ffff888100042f00 [ 352.904391] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000 [ 352.905861] page dumped because: kasan: bad access detected [ 352.907323] Memory state around the buggy address: [ 352.908218] ffff8881c8251380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.909471] ffff8881c8251400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.910735] >ffff8881c8251480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.912012] ^ [ 352.912642] ffff8881c8251500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.913919] ffff8881c8251580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 352.915185] ================================================================== Fixes: d39d714 ("idr: introduce idr_for_each_entry_continue_ul()") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Acked-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says: ==================== Netfilter fixes for net (v2) The following patchset contains Netfilter fixes for net: 1) Move back the defrag users fields to the global netns_nf area. Kernel fails to boot if conntrack is builtin and kernel is booted with: nf_conntrack.enable_hooks=1. From Florian Westphal. 2) Rule event notification is missing relevant context such as the position handle and the NLM_F_APPEND flag. 3) Rule replacement is expanded to add + delete using the existing rule handle, reverse order of this operation so it makes sense from rule notification standpoint. 4) Propagate to userspace the NLM_F_CREATE and NLM_F_EXCL flags from the rule notification path. Patches #2, #3 and #4 are used by 'nft monitor' and 'iptables-monitor' userspace utilities which are not correctly representing the following operations through netlink notifications: - rule insertions - rule addition/insertion from position handle - create table/chain/set/map/flowtable/... ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Fix afs_launder_page() to set the starting position of the StoreData RPC at the offset into the page at which the modified data starts instead of at the beginning of the page (the iov_iter is correctly offset). The offset got lost during the conversion to passing an iov_iter into afs_store_data(). Changes: ver #2: - Use page_offset() rather than manually calculating it[1]. Fixes: bd80d8a ("afs: Use ITER_XARRAY for writing") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/YST/0e92OdSH0zjg@casper.infradead.org/ [1] Link: https://lore.kernel.org/r/162880783179.3421678.7795105718190440134.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/162937512409.1449272.18441473411207824084.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/162981148752.1901565.3663780601682206026.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/163005741670.2472992.2073548908229887941.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163221839087.3143591.14278359695763025231.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163292980654.4004896.7134735179887998551.stgit@warthog.procyon.org.uk/ # v2

…ernel/git/at91/linux into arm/fixes AT91 fixes #2 for 5.15: - More fixes for AT91 platform power management code related to the introduction of sama7g5: - management of DDR3L regulator rails for sama7g5ek - loading of TLB on different cores - PIO controller slew-rate settings for sama7g5ek: be aligned with datasheet requirements. * tag 'at91-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pins ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs ARM: at91: pm: preload base address of controllers in tlb ARM: at91: pm: group constants and addresses loading ARM: dts: at91: sama7g5ek: add suspend voltage for ddr3l rail Link: https://lore.kernel.org/r/20211004114344.19304-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Yonghong Song says: ==================== The patch [1] exposed a bpf_timer initialization bug in function check_and_init_map_value(). With bug fix here, the patch [1] can be applied with all selftests passed. Please see individual patches for fix details. [1] https://lore.kernel.org/bpf/20220209070324.1093182-2-memxor@gmail.com/ Changelog: v3 -> v4: . move header file in patch #1 to avoid bpf-next merge conflict v2 -> v3: . switch patch #1 and patch #2 for better bisecting v1 -> v2: . add Fixes tag for patch #1 . rebase against bpf tree ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This driver, like several others, uses a chained IRQ for each GPIO bank, and forwards .irq_set_wake to the GPIO bank's upstream IRQ. As a result, a call to irq_set_irq_wake() needs to lock both the upstream and downstream irq_desc's. Lockdep considers this to be a possible deadlock when the irq_desc's share lockdep classes, which they do by default: ============================================ WARNING: possible recursive locking detected 5.17.0-rc3-00394-gc849047c2473 #1 Not tainted -------------------------------------------- init/307 is trying to acquire lock: c2dfe27c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0x58/0xa0 but task is already holding lock: c3c0ac7c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0x58/0xa0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by init/307: #0: c1f29f18 (system_transition_mutex){+.+.}-{3:3}, at: __do_sys_reboot+0x90/0x23c #1: c20f7760 (&dev->mutex){....}-{3:3}, at: device_shutdown+0xf4/0x224 #2: c2e804d8 (&dev->mutex){....}-{3:3}, at: device_shutdown+0x104/0x224 #3: c3c0ac7c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0x58/0xa0 stack backtrace: CPU: 0 PID: 307 Comm: init Not tainted 5.17.0-rc3-00394-gc849047c2473 #1 Hardware name: Allwinner sun8i Family unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x68/0x90 dump_stack_lvl from __lock_acquire+0x1680/0x31a0 __lock_acquire from lock_acquire+0x148/0x3dc lock_acquire from _raw_spin_lock_irqsave+0x50/0x6c _raw_spin_lock_irqsave from __irq_get_desc_lock+0x58/0xa0 __irq_get_desc_lock from irq_set_irq_wake+0x2c/0x19c irq_set_irq_wake from irq_set_irq_wake+0x13c/0x19c [tail call from sunxi_pinctrl_irq_set_wake] irq_set_irq_wake from gpio_keys_suspend+0x80/0x1a4 gpio_keys_suspend from gpio_keys_shutdown+0x10/0x2c gpio_keys_shutdown from device_shutdown+0x180/0x224 device_shutdown from __do_sys_reboot+0x134/0x23c __do_sys_reboot from ret_fast_syscall+0x0/0x1c However, this can never deadlock because the upstream and downstream IRQs are never the same (nor do they even involve the same irqchip). Silence this erroneous lockdep splat by applying what appears to be the usual fix of moving the GPIO IRQs to separate lockdep classes. Fixes: a59c99d ("pinctrl: sunxi: Forward calls to irq_set_irq_wake") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220216040037.22730-1-samuel@sholland.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

in tunnel mode, if outer interface(ipv4) is less, it is easily to let inner IPV6 mtu be less than 1280. If so, a Packet Too Big ICMPV6 message is received. When send again, packets are fragmentized with 1280, they are still rejected with ICMPV6(Packet Too Big) by xfrmi_xmit2(). According to RFC4213 Section3.2.2: if (IPv4 path MTU - 20) is less than 1280 if packet is larger than 1280 bytes Send ICMPv6 "packet too big" with MTU=1280 Drop packet else Encapsulate but do not set the Don't Fragment flag in the IPv4 header. The resulting IPv4 packet might be fragmented by the IPv4 layer on the encapsulator or by some router along the IPv4 path. endif else if packet is larger than (IPv4 path MTU - 20) Send ICMPv6 "packet too big" with MTU = (IPv4 path MTU - 20). Drop packet. else Encapsulate and set the Don't Fragment flag in the IPv4 header. endif endif Packets should be fragmentized with ipv4 outer interface, so change it. After it is fragemtized with ipv4, there will be double fragmenation. No.48 & No.51 are ipv6 fragment packets, No.48 is double fragmentized, then tunneled with IPv4(No.49& No.50), which obey spec. And received peer cannot decrypt it rightly. 48 2002::10 2002::11 1296(length) IPv6 fragment (off=0 more=y ident=0xa20da5bc nxt=50) 49 0x0000 (0) 2002::10 2002::11 1304 IPv6 fragment (off=0 more=y ident=0x7448042c nxt=44) 50 0x0000 (0) 2002::10 2002::11 200 ESP (SPI=0x00035000) 51 2002::10 2002::11 180 Echo (ping) request 52 0x56dc 2002::10 2002::11 248 IPv6 fragment (off=1232 more=n ident=0xa20da5bc nxt=50) xfrm6_noneed_fragment has fixed above issues. Finally, it acted like below: 1 0x6206 192.168.1.138 192.168.1.1 1316 Fragmented IP protocol (proto=Encap Security Payload 50, off=0, ID=6206) [Reassembled in #2] 2 0x6206 2002::10 2002::11 88 IPv6 fragment (off=0 more=y ident=0x1f440778 nxt=50) 3 0x0000 2002::10 2002::11 248 ICMPv6 Echo (ping) request Signed-off-by: Lina Wang <lina.wang@mediatek.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

Ido Schimmel says: ==================== selftests: mlxsw: A couple of fixes Patch #1 fixes a breakage due to a change in iproute2 output. The real problem is not iproute2, but the fact that the check was not strict enough. Fixed by using JSON output instead. Targeting at net so that the test will pass as part of old and new kernels regardless of iproute2 version. Patch #2 fixes an issue uncovered by the first one. ==================== Link: https://lore.kernel.org/r/20220302161447.217447-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

alexdeucher and others added 30 commits November 9, 2014 18:20

drm/radeon: remove invalid pci id

86fbda5

0x4c6e is a secondary device id so should not be used by the driver. Noticed-by: Mark Kettenis <mark.kettenis@xs4all.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org

Input: opencores-kbd - fix error handling

7362ee3

When I was adjusting patch in 848d479 to use devm_ioremap_resource() I messed it up. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: ims-pcu - fix dead code in ims_pcu_ofn_reg_addr_store()

c061433

Coverity pointed out that at return point error is always 0 so the conditional is not needed. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

sparc: Hook up bpf system call.

7bc53a1

Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: Add Soren as reviewer for Zynq

26ac785

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

soc: versatile: Add terminating entry for realview_soc_of_match

f5f9eee

The of_device_id table is supposed to be zero-terminated. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

usbnet: add a callback for set_rx_mode

daf93f4

To delegate promiscuous mode and multicast filtering to the subdriver. Signed-off-by: Olivier Blin <olivier.blin@softathome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

cdc-ether: extract usbnet_cdc_update_filter function

6278a2c

This will be used by the set_rx_mode callback. Also move a comment about multicast filtering in this new function. Signed-off-by: Olivier Blin <olivier.blin@softathome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

overlayfs: barriers for opening upper-layer directory

c56ca28

make sure that a) all stores done by opening struct file don't leak past storing the reference in od->upperfile b) the lockless side has read dependency barrier Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

isofs_cmp(): we'll never see a dentry for . or ..

2bd3620

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Hpsa next #2

Hpsa next #2

dabrace commented Nov 10, 2014

Hpsa next #2

Hpsa next #2

Conversation

dabrace commented Nov 10, 2014