Skip to content

danielbrunt57/adaptive-lighting

Β 
Β 

Repository files navigation

hacs_badge Version

All Contributors

🌞 Adaptive Lighting: Enhance Your Home's Atmosphere with Smart, Sun-Synchronized Lighting πŸŒ™

logo

Adaptive Lighting is a custom component for Home Assistant that intelligently adjusts the brightness and color of your lights πŸ’‘ based on the sun's position, while still allowing for manual control.

Download and install directly through HACS (Home Assistant Community Store)

By automatically adapting the settings of your lights throughout the day, Adaptive Lighting helps maintain your natural circadian rhythm 😴, which can lead to improved sleep, mood, and overall well-being. Experience cooler color temperatures at noon, gradually transitioning to warmer colors at sunset and sunrise.

In addition to its regular mode, Adaptive Lighting also offers a "sleep mode" 🌜 which sets your lights to minimal brightness and a very warm color, perfect for winding down at night.

🌈 Visualize Adaptive Lighting's settings with the 🌞 Adaptive Lighting Simulator WebApp πŸŒ›

adaptive-lighting.mp4

[ToC]

πŸ’‘ Features

When initially turning on a light that is controlled by Adaptive Lighting, the light.turn_on service call is intercepted, and the light's brightness and color are automatically adjusted based on the sun's position. After that, the light's brightness and color are automatically adjusted at a regular interval.

Adaptive Lighting provides four switches (using "living_room" as an example component name):

  • switch.adaptive_lighting_living_room: Turn Adaptive Lighting on or off and view current light settings through its attributes.
  • switch.adaptive_lighting_sleep_mode_living_room: Activate "sleep mode" 😴 and set custom sleep_brightness and sleep_color_temp.
  • switch.adaptive_lighting_adapt_brightness_living_room: Enable or disable brightness adaptation πŸ”† for supported lights.
  • switch.adaptive_lighting_adapt_color_living_room: Enable or disable color adaptation 🌈 for supported lights.

πŸŽ›οΈ Regain Manual Control

Adaptive Lighting is designed to automatically detect when you or another source (e.g., automation) manually changes light settings πŸ•ΉοΈ. When this occurs, the affected light is marked as "manually controlled," and Adaptive Lighting will not make further adjustments until the light is turned off and back on or reset using the adaptive_lighting.set_manual_control service call. This feature is available when take_over_control is enabled.

Additionally, enabling detect_non_ha_changes allows Adaptive Lighting to detect all state changes, including those made outside of Home Assistant, by comparing the light's state to its previously used settings. The adaptive_lighting.manual_control event is fired when a light is marked as "manually controlled," allowing for integration with automations πŸ€–.

⚠️ Caution: Some lights might falsely indicate an 'on' state, which could result in lights turning on unexpectedly. Disable detect_non_ha_changes if you encounter such issues.

πŸ“š Table of Contents

βš™οΈ Configuration

Adaptive Lighting supports configuration through both YAML and the frontend (Settings -> Devices and Services -> Adaptive Lighting, Adaptive Lighting -> Options), with identical option names in both methods.

# Example configuration.yaml entry
adaptive_lighting:
  lights:
    - light.living_room_lights

Note: If you plan to strictly use the UI, the adaptive_lighting: entry must still be added to the YAML.

Transform your home's atmosphere with Adaptive Lighting 🏠, and experience the benefits of intelligent, sun-synchronized lighting today!

πŸ“ Options

All of the configuration options are listed below, along with their default values. The YAML and frontend configuration methods support all of the options listed below.

Variable name Description Default Type
lights List of light entity_ids to be controlled (may be empty). 🌟 [] list of entity_ids
interval Frequency to adapt the lights, in seconds. πŸ”„ 90 int > 0
transition Duration of transition when lights change, in seconds. πŸ•‘ 45 float 0-6553
initial_transition Duration of the first transition when lights turn from off to on in seconds. ⏲️ 1 float 0-6553
min_brightness Minimum brightness percentage. πŸ’‘ 1 int 1-100
max_brightness Maximum brightness percentage. πŸ’‘ 100 int 1-100
min_color_temp Warmest color temperature in Kelvin. πŸ”₯ 2000 int 1000-10000
max_color_temp Coldest color temperature in Kelvin. ❄️ 5500 int 1000-10000
prefer_rgb_color Whether to prefer RGB color adjustment over light color temperature when possible. 🌈 False bool
sleep_brightness Brightness percentage of lights in sleep mode. 😴 1 int 1-100
sleep_rgb_or_color_temp Use either "rgb_color" or "color_temp" in sleep mode. πŸŒ™ color_temp one of ['color_temp', 'rgb_color']
sleep_color_temp Color temperature in sleep mode (used when sleep_rgb_or_color_temp is color_temp) in Kelvin. 😴 1000 int 1000-10000
sleep_rgb_color RGB color in sleep mode (used when sleep_rgb_or_color_temp is "rgb_color"). 🌈 [255, 56, 0] RGB color
sleep_transition Duration of transition when "sleep mode" is toggled in seconds. 😴 1 float 0-6553
transition_until_sleep When enabled, Adaptive Lighting will treat sleep settings as the minimum, transitioning to these values after sunset. πŸŒ™ False bool
sunrise_time Set a fixed time (HH:MM:SS) for sunrise. πŸŒ… None str
min_sunrise_time Set the earliest virtual sunrise time (HH:MM:SS), allowing for later sunrises. πŸŒ… None str
max_sunrise_time Set the latest virtual sunrise time (HH:MM:SS), allowing for earlier sunrises. πŸŒ… None str
sunrise_offset Adjust sunrise time with a positive or negative offset in seconds. ⏰ 0 int
sunset_time Set a fixed time (HH:MM:SS) for sunset. πŸŒ‡ None str
min_sunset_time Set the earliest virtual sunset time (HH:MM:SS), allowing for later sunsets. πŸŒ‡ None str
max_sunset_time Set the latest virtual sunset time (HH:MM:SS), allowing for earlier sunsets. πŸŒ‡ None str
sunset_offset Adjust sunset time with a positive or negative offset in seconds. ⏰ 0 int
brightness_mode Brightness mode to use. Possible values are default, linear, and tanh (uses brightness_mode_time_dark and brightness_mode_time_light). πŸ“ˆ default one of ['default', 'linear', 'tanh']
brightness_mode_time_dark (Ignored if brightness_mode='default') The duration in seconds to ramp up/down the brightness before/after sunrise/sunset. πŸ“ˆπŸ“‰ 900 int
brightness_mode_time_light (Ignored if brightness_mode='default') The duration in seconds to ramp up/down the brightness after/before sunrise/sunset. πŸ“ˆπŸ“‰. 3600 int
take_over_control Disable Adaptive Lighting if another source calls light.turn_on while lights are on and being adapted. Note that this calls homeassistant.update_entity every interval! πŸ”’ True bool
detect_non_ha_changes Detects and halts adaptations for non-light.turn_on state changes. Needs take_over_control enabled. πŸ•΅οΈ Caution: ⚠️ Some lights might falsely indicate an 'on' state, which could result in lights turning on unexpectedly. Disable this feature if you encounter such issues. False bool
autoreset_control_seconds Automatically reset the manual control after a number of seconds. Set to 0 to disable. ⏲️ 0 int 0-31536000
only_once Adapt lights only when they are turned on (true) or keep adapting them (false). πŸ”„ False bool
adapt_only_on_bare_turn_on When turning lights on initially. If set to true, AL adapts only if light.turn_on is invoked without specifying color or brightness. ❌🌈 This e.g., prevents adaptation when activating a scene. If false, AL adapts regardless of the presence of color or brightness in the initial service_data. Needs take_over_control enabled. πŸ•΅οΈ False bool
separate_turn_on_commands Use separate light.turn_on calls for color and brightness, needed for some light types. πŸ”€ False bool
send_split_delay Delay (ms) between separate_turn_on_commands for lights that don't support simultaneous brightness and color setting. ⏲️ 0 int 0-10000
adapt_delay Wait time (seconds) between light turn on and Adaptive Lighting applying changes. Might help to avoid flickering. ⏲️ 0 float > 0
skip_redundant_commands Skip sending adaptation commands whose target state already equals the light's known state. Minimizes network traffic and improves the adaptation responsivity in some situations. πŸ“‰Disable if physical light states get out of sync with HA's recorded state. False bool
intercept Intercept and adapt light.turn_on calls to enabling instantaneous color and brightness adaptation. 🏎️ Disable for lights that do not support light.turn_on with color and brightness. True bool
multi_light_intercept Intercept and adapt light.turn_on calls that target multiple lights. βž—βš οΈ This might result in splitting up a single light.turn_on call into multiple calls, e.g., when lights are in different switches. Requires intercept to be enabled. True bool
include_config_in_attributes Show all options as attributes on the switch in Home Assistant when set to true. πŸ“ False bool

Full example:

# Example configuration.yaml entry
adaptive_lighting:
- name: "default"
  lights: []
  prefer_rgb_color: false
  transition: 45
  initial_transition: 1
  interval: 90
  min_brightness: 1
  max_brightness: 100
  min_color_temp: 2000
  max_color_temp: 5500
  sleep_brightness: 1
  sleep_color_temp: 1000
  sunrise_time: "08:00:00"  # override the sunrise time
  sunrise_offset:
  sunset_time:
  sunset_offset: 1800  # in seconds or '00:30:00'
  take_over_control: true
  detect_non_ha_changes: false
  only_once: false

πŸ› οΈ Services

adaptive_lighting.apply

adaptive_lighting.apply applies Adaptive Lighting settings to lights on demand.

Service data attribute Description Required Type
entity_id The entity_id of the switch with the settings to apply. πŸ“ βœ… list of entity_ids
lights A light (or list of lights) to apply the settings to. πŸ’‘ ❌ list of entity_ids
transition Duration of transition when lights change, in seconds. πŸ•‘ ❌ float 0-6553
adapt_brightness Whether to adapt the brightness of the light. 🌞 ❌ bool
adapt_color Whether to adapt the color on supporting lights. 🌈 ❌ bool
prefer_rgb_color Whether to prefer RGB color adjustment over light color temperature when possible. 🌈 ❌ bool
turn_on_lights Whether to turn on lights that are currently off. πŸ”† ❌ bool

adaptive_lighting.set_manual_control

adaptive_lighting.set_manual_control can mark (or unmark) whether a light is "manually controlled", meaning that when a light has manual_control, the light is not adapted.

Service data attribute Description Required Type
entity_id The entity_id of the switch in which to (un)mark the light as being manually controlled. πŸ“ βœ… list of entity_ids
lights entity_id(s) of lights, if not specified, all lights in the switch are selected. πŸ’‘ ❌ list of entity_ids
manual_control Whether to add ("true") or remove ("false") the light from the "manual_control" list. πŸ”’ ❌ bool

adaptive_lighting.change_switch_settings

adaptive_lighting.change_switch_settings (new in 1.7.0) Change any of the above configuration options of Adaptive Lighting (such as sunrise_time or prefer_rgb_color) with a service call directly from your script/automation.

⚠️ Note: These settings will not be written to your config and will be reset on restart of Home Assistant! You can see the current settings in the switch.adaptive_lighting_XXX attributes if include_config_in_attributes is enabled.

Service data attribute Required Description
use_defaults ❌ (default: current for current settings) Choose from factory, configuration, or current to reset variables not being set with this service call. current leaves them as they are, configuration resets to initial startup values, factory resets to default values listed in the documentation.
all other keys (except the ones in the table below ⚠️) ❌ See the table below for disallowed keys.

The following keys are disallowed:

DISALLOWED service data Description
entity_id You cannot change the switch's entity_id, as it has already been registered.
lights You may call adaptive_lighting.apply with your lights or create a new config instead.
name You can rename your switch's display name in Home Assistant's UI.
interval The interval is used only once when the config loads. A config change and restart are required.

πŸ€– Automation examples

Reset the manual_control status of a light after an hour.
- alias: "Adaptive lighting: reset manual_control after 1 hour"
  mode: parallel
  trigger:
    platform: event
    event_type: adaptive_lighting.manual_control
  variables:
    light: "{{ trigger.event.data.entity_id }}"
    switch: "{{ trigger.event.data.switch }}"
  action:
    - delay: "01:00:00"
    - condition: template
      value_template: "{{ light in state_attr(switch, 'manual_control') }}"
    - service: adaptive_lighting.set_manual_control
      data:
        entity_id: "{{ switch }}"
        lights: "{{ light }}"
        manual_control: false
Toggle multiple Adaptive Lighting switches to "sleep mode" using an input_boolean.sleep_mode.
- alias: "Adaptive lighting: toggle 'sleep mode'"
  trigger:
    - platform: state
      entity_id: input_boolean.sleep_mode
    - platform: homeassistant
      event: start  # in case the states aren't properly restored
  variables:
    sleep_mode: "{{ states('input_boolean.sleep_mode') }}"
  action:
    service: "switch.turn_{{ sleep_mode }}"
    entity_id:
      - switch.adaptive_lighting_sleep_mode_living_room
      - switch.adaptive_lighting_sleep_mode_bedroom

Set your sunrise and sunset time based on your alarm. The below script sets sunset_time exactly 12 hours after the custom sunrise time.

iphone_carly_wakeup:
  alias: iPhone Carly Wakeup
  sequence:
    - condition: state
      entity_id: input_boolean.carly_iphone_wakeup
      state: "off"
    - service: input_datetime.set_datetime
      target:
        entity_id: input_datetime.carly_iphone_wakeup
      data:
        time: '{{ now().strftime("%H:%M:%S") }}'
    - service: input_boolean.turn_on
      target:
        entity_id: input_boolean.carly_iphone_wakeup
    - repeat:
        count: >
          {{ (states.switch
              | map(attribute="entity_id")
              | select(">","switch.adaptive_lighting_al_")
              | select("<", "switch.adaptive_lighting_al_z")
              | join(",")
             ).split(",") | length }}
        sequence:
          - service: adaptive_lighting.change_switch_settings
            data:
              entity_id: switch.adaptive_lighting_al_den_ceilingfan_lights
              sunrise_time: '{{ now().strftime("%H:%M:%S") }}'
              sunset_time: >
                {{ (as_timestamp(now()) + 12*60*60) | timestamp_custom("%H:%M:%S") }}
    - service: script.turn_on
      target:
        entity_id: script.run_wakeup_routine
    - service: input_boolean.turn_off
      target:
        entity_id:
          - input_boolean.carly_iphone_winddown
          - input_boolean.carly_iphone_bedtime
    - service: input_datetime.set_datetime
      target:
        entity_id: input_datetime.wakeup_time
      data:
        time: '{{ now().strftime("%H:%M:%S") }}'
    - service: script.adaptive_lighting_disable_sleep_mode
  mode: queued
  icon: mdi:weather-sunset
  max: 10

Additional Information

For more details on adding the integration and setting options, refer to the documentation of the PR and this video tutorial on Reddit.

Adaptive Lighting was initially inspired by @claytonjn's hass-circadian_lighting, but has since been entirely rewritten and expanded with new features.

πŸ†˜ Troubleshooting

Encountering issues? Enable debug logging in your configuration.yaml:

logger:
  default: warning
  logs:
    custom_components.adaptive_lighting: debug

After the issue occurs, create a new issue report with the log (/config/home-assistant.log).

❗ Common Problems & Solutions

πŸ’‘ Lights Not Responding or Turning On by Themselves

Adaptive Lighting sends more commands to lights than a typical human user would. If your light control network is unhealthy, you may experience:

  • Laggy manual commands (e.g., turning lights on or off).
  • Unresponsive lights.
  • Home Assistant reporting incorrect light states, causing Adaptive Lighting to inadvertently turn lights back on.

Most issues that appear to be caused by Adaptive Lighting are actually due to unrelated problems. Addressing these issues will significantly improve your Home Assistant experience.

In case lights are suddenly turning on by themselves, this is most likely due to the light incorrectly reporting an "on" state to Home Assistant, leading to an undesired Adaptive Lighting action. To prevent adapting in cases where the state of the light is suddenly "on" and only adapt if there is an associated light.turn_on service call, set detect_non_ha_changes: false.

πŸ“Ά WiFi Networks

Ensure your light bulbs have a strong WiFi connection. If the signal strength is less than -70dBm, the connection may be weak and prone to dropping messages.

πŸ•ΈοΈ Zigbee, Z-Wave, and Other Mesh Networks

Mesh networks typically require powered devices to act as routers, relaying messages back to the central coordinator (the radio connected to Home Assistant). Philips lights usually function as routers, while Ikea, Sengled, and generic Tuya bulbs often do not. If devices become unresponsive or fail to respond to commands, Adaptive Lighting can exacerbate the issue. Use network maps (available in ZHA, zigbee2mqtt, deCONZ, and ZWaveJS UI) to evaluate your network health. Smart plugs can be an affordable way to add more routers to your network.

For most Zigbee networks, using groups is essential for optimal performance. For example, if you want to use Adaptive Lighting in a hallway with six bulbs, adding each bulb individually to the Adaptive Lighting configuration could overwhelm the network with commands. Instead, create a group in your Zigbee software (not a regular Home Assistant group) and add that single group to the Adaptive Lighting configuration. This sends a single broadcast command to adjust all bulbs, improving response times and keeping the bulbs in sync.

As a rule of thumb, if you always control lights together (e.g., bulbs in a ceiling fixture), they should be in a Zigbee group. Expose only the group (not individual bulbs) in Home Assistant Dashboards and external systems like Google Home or Apple HomeKit.

⚠️ If you control lights individually, manual_control cannot behave correctly! If you need to control lights individually as well, use a Home Assistant Light Group.

🌈 Light Colors Not Matching

Bulbs from different manufacturers or models may have varying color temperature specifications. For instance, if you have two Adaptive Lighting configurationsβ€”one with only Philips Hue White Ambiance bulbs and another with a mix of Philips Hue White Ambiance and Sengled bulbsβ€”the Philips Hue bulbs may appear to have different color temperatures despite having identical settings.

To resolve this:

  1. Include only bulbs of the same make and model in a single Adaptive Lighting configuration.
  2. Rearrange bulbs so that different color temperatures are not visible simultaneously.

πŸ’‘ Bulb-Specific Issues

These lights are known to exhibit disadvantageous behaviour due to firmware bugs, insufficient functionality, or hardware limitations:

  • Sengled Z01-A19NAE26
    • Unexpected turn-ons: If Adaptive Lighting sends a long transition time (like the default 45 seconds), and the bulb is turned off during that time, it may turn back on after approximately 10 seconds to continue the transition command. Since the bulb is turning itself on, there will be no obvious trigger in Home Assistant or other logs indicating the cause of the light turning on. To fix this, set a much shorter transition time, such as 1 second.
    • Heat sensitivity: Additionally, these bulbs may perform poorly in enclosed "dome" style ceiling lights, particularly when hot. While most LEDs (even non-smart ones) state in the fine print that they do not support working in enclosed fixtures, in practice, more expensive bulbs like Philips Hue generally perform better. To resolve this issue, move the problematic bulbs to open-air fixtures.
  • Ikea Tradfri bulbs/drivers (and related Ikea smart light products)
    • Unsupported simultaneous transition of brightness and color: When receiving such a command, they switch the brightness instantly and only transition the color. To get smooth transitions of both brightness and color, enable separate_turn_on_commands.
    • Unresponsiveness during color transitions: No other commands are processed during an ongoing color transition, e.g., turn-off commands are ignored and lights stay on despite being reported as off to Home Assistant. The default config with long transitions thus results in long periods of unresponsiveness. To work around this, disable transitions by setting transition to 0, and increase the adaptation frequency by setting interval to a short time, e.g., 15 seconds, to retain the impression of smooth continuous adaptations. Keeping the initial_transition is recommended for a smooth fade-in (lights are usually not turned off momentarily after being turned on, in which case a short period of unresponsiveness is tolerable).

πŸ“Š Graphs!

These graphs were generated using the values calculated by the Adaptive Lighting sensor/switch(es).

β˜€οΈ Sun Position

cl_percent|690x131

🌑️ Color Temperature

cl_color_temp|690x129

πŸ”† Brightness

cl_brightness|690x130

While using transition_until_sleep: true

image

Custom brightness ramps using brightness_mode with "linear" and "tanh"

Enhance your control over brightness transitions during sunrise and sunset with brightness_mode (click here to learn more 🧠).

With Adaptive Lighting, you can set a brightness_mode to specify how the brightness changes during sunrise and sunset. The brightness_mode can be set to "default" (as illustrated in other graphs above), "linear", or "tanh". If you choose to deviate from the "default" mode, you can adjust brightness_mode_time_dark and brightness_mode_time_light to further customize the lighting transitions.

When brightness_mode is set to "linear":

  • During sunset, the brightness begins to gradually decrease from max_brightness starting at time=sunset_time - brightness_mode_time_light, until it reaches min_brightness at time=sunset_time + brightness_mode_time_dark.
  • During sunrise, the brightness begins to gradually increase from min_brightness starting at time=sunrise_time - brightness_mode_time_dark, until it reaches max_brightness at time=sunrise_time + brightness_mode_time_light.

When brightness_mode is set to "tanh", it uses the smooth transition of a hyperbolic tangent function:

  • During sunset, the brightness starts to decrease from 95% of max_brightness starting at time=sunset_time - brightness_mode_time_light, until it reaches 5% of min_brightness at time=sunset_time + brightness_mode_time_dark.
  • During sunrise, the brightness starts to increase from 5% of min_brightness starting at time=sunrise_time - brightness_mode_time_dark, until it reaches 95% of max_brightness at time=sunrise_time + brightness_mode_time_light.

Notice the values of brightness_mode_time_light and brightness_mode_time_dark in the text box. image image image image

Check out the interactive webapp on https://basnijholt.github.io/adaptive-lighting/ to play with the parameters and see how the brightness changes!

πŸ‘€ See also

πŸ‘₯ Contributors

Bas Nijholt
Bas Nijholt

πŸ’» 🚧 πŸ›
Sven Serlier
Sven Serlier

πŸ“–
Will Puckett
Will Puckett

πŸ“–
vapescherov
vapescherov

πŸ’»
Travis Pew
Travis Pew

πŸ“–
Sindre Broch
Sindre Broch

πŸ“–
Denis Shulyaka
Denis Shulyaka

πŸ’»
@RubenKelevra
@RubenKelevra

πŸ“– πŸ’»
JΓΌri Rebane
JΓΌri Rebane

🌍
quantumlemur
quantumlemur

πŸ’»
Michael Kirsch
Michael Kirsch

πŸ’»
Nicholai Nissen
Nicholai Nissen

🌍
Martin Myhrman
Martin Myhrman

🌍
Michel Peterson
Michel Peterson

πŸ’»
MangoScango
MangoScango

πŸ’»
Lynilia
Lynilia

🌍
LukaszP2
LukaszP2

🌍
Joscha Wagner
Joscha Wagner

🌍
skdzzz
skdzzz

🌍
Simon Gurcke
Simon Gurcke

πŸ’»
SΓΆren Beye
SΓΆren Beye

πŸ’»
Hudson Brendon
Hudson Brendon

🌍
Gabriel Visser
Gabriel Visser

πŸ“–
Gleb
Gleb

🌍
Deleted user
Deleted user

🌍
Avi Miller
Avi Miller

πŸ“– πŸ’»
Denys Dovhan
Denys Dovhan

🌍
David Stenbeck
David Stenbeck

πŸ“–
Kevin Addeman
Kevin Addeman

πŸ’»
covid10
covid10

🌍 πŸ’»
Michael Chisholm
Michael Chisholm

πŸ’»
Justin Paupore
Justin Paupore

πŸ’»
bedaes
bedaes

πŸ’»
awashingmachine
awashingmachine

🌍
Clayton Nummer
Clayton Nummer

πŸ’»
Robert Crandall
Robert Crandall

πŸ’»
Matt Forster
Matt Forster

πŸ’»
Mark Niemeyer
Mark Niemeyer

🌍 πŸ’»
Elliott Plack
Elliott Plack

πŸ“–
ngommers
ngommers

🌍
Andrew Berry
Andrew Berry

πŸ“–
TomΓ‘Ε‘ Valigura
TomΓ‘Ε‘ Valigura

🌍
Benjamin Auquite
Benjamin Auquite

πŸ’» πŸ› 🚧
Skyler Carlson
Skyler Carlson

πŸ“–
Chris
Chris

πŸ’»
Raman Gupta
Raman Gupta

πŸ’»
igiannakas
igiannakas

πŸ’»
Mario Guggenberger
Mario Guggenberger

πŸ’»
Kendell R
Kendell R

🎨
lukerix
lukerix

🌍
Maxime Bailleul
Maxime Bailleul

🌍
Michel Balzer
Michel Balzer

🌍
Enrico Gambini
Enrico Gambini

🌍
MirCore
MirCore

🌍
Fernando Belaza
Fernando Belaza

🌍
Vladimir Cravero
Vladimir Cravero

🌍
Julien QuiΓ©vreux
Julien QuiΓ©vreux

🌍
lightrabbit
lightrabbit

🌍
Arie6414
Arie6414

🌍
luixcaetano
luixcaetano

🌍
fmarcu
fmarcu

🌍
michaelkmoch
michaelkmoch

🌍
Fred
Fred

🌍
Z-weapon
Z-weapon

🌍
Kyle Bjordahl
Kyle Bjordahl

πŸ’» πŸ›
Olek Bruks
Olek Bruks

🌍
Gabriele Baldassarre
Gabriele Baldassarre

🌍
Pepijn Baart
Pepijn Baart

🌍
Artem Pastukhov
Artem Pastukhov

🌍
Martin Ε tefany
Martin Ε tefany

🌍
quenthal
quenthal

🌍
Luki72
Luki72

🌍
pantan-cymk
pantan-cymk

🌍
yousaf465
yousaf465

🌍
Pierre Belanger
Pierre Belanger

πŸ“–
Jan-Sigurd SΓΈrensen
Jan-Sigurd SΓΈrensen

🌍
EF01
EF01

🌍
Mr Snake
Mr Snake

🌍
hungrymachine1
hungrymachine1

🌍
4D4M-Github
4D4M-Github

🌍
Ivan
Ivan

🌍
Florent Cardoen
Florent Cardoen

🌍
moemeli
moemeli

🌍
saya6k
saya6k

🌍
droans
droans

πŸ’»
Jonathan Kang
Jonathan Kang

πŸ’»
scuricvladimir
scuricvladimir

🌍
Pieter
Pieter

🌍
san80068259
san80068259

🌍
Frosh
Frosh

πŸ’»
Rafael Miranda
Rafael Miranda

🌍
rVlad93
rVlad93

🌍
BjΓΆrn Ebbinghaus
BjΓΆrn Ebbinghaus

πŸ’»
Marck
Marck

πŸ’»
Lucho Gizdov
Lucho Gizdov

🌍
Add your contributions

Translating Adaptive Lighting

Help to translate Adaptive Lighting into your language on Hosted Weblate!

Translating can be done from your webbrowser, no programming knowledge is needed!

Translation status

About

Adaptive Lighting custom component for Home Assistant

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Python 98.8%
  • Other 1.2%