Jetson GPIO for Go
Use this at your own risk. If some of the pins are mixed up in the software then bad things could happen. Not saying that I would do it on purpose, but there is always the chance. The defs for the pins were pulled from NVIDIA/Jetson-gpio so I think it should be ok for the development boards. That being said not much is going to be tested, because I am not paid for this.
Pull requests are welcomed. So if a bug is found please submit a pull request. Events are not done yet. I am going to use go channels for that. I will have examples later.
Must Set User Permissions
sudo groupadd -f -r gpio
sudo usermod -a -G gpio your_user_name
go to setup folder in jetsongpio
run setup_gpio.sh
./setup_gpio.sh
Reboot or reload udev rules
sudo udevadm control --reload-rules && sudo udevadm trigger