Temperature, Pressure, Humidity and Battery

Parts:

Rev 1:

• 1 Arduino MKR 1010 WIFI
• 1 Adafruit BMP 280 sensor
• 1 Bread Board
• 1 battery LI-ON 3.7V / 2000 mAH
• Some wires

Rev 2:

• 1 Arduino MKR 1010 WIFI
• 1 Adafruit BMP 280 sensor
• 1 Bread Board
• 1 battery LI-ON 3.7V / 2000 mAH
• Some wires
• 0.96 Inch OLED Display SSD1306 I2C 128*64

Rev 3:

• 1 Arduino MKR 1010 WIFI
• 1 BME 280 sensor
• 1 Bread Board
• Some wires

BME 280 sensor, install cactus.io library:

http://cactus.io/hookups/sensors/barometric/bme280/hookup-arduino-to-bme280-barometric-pressure-sensor http://static.cactus.io/downloads/library/bme280/cactus_io_BME280_I2C.zip

Board Rev 1:

BLE Software (Rev 1):

Folder: EnvSensingBle

Temperature / Pressure / Battery Level

Environmental Sensing Service Battery Service

BLE Software (Rev2):

Folder: EnvSensingBleRev2

Temperature / Pressure / Battery Level

Environmental Sensing Service Battery Service

BLE Software (Rev3):

Folder: EnvSensingBleRev3

Temperature / Pressure / Humidity

Environmental Sensing Service

WiFi Software (http) (Rev 1):

Folder: EnvSensingWifi

Temperature / Pressure / Battery Level

Http Client is posting to the rest api env-sensing-api

WiFi Software (mqtt) (Rev 1):

Folder EnvSensingMQTT

Temperature / Pressure / Battery Level

change you wifi settings in arduino_secret.h

change you broker ip

WiFi Software (http) (Rev 3):

Folder: EnvSensingWifiRev3

Temperature / Humidity / Pressure

Http Client is posting to the rest api env-sensing-api

Not connected Software (Rev 2):

Folder: EnvSensingRev2

Temperature / Pressure / Battery Level