Releases: devbis/z03mmc
Releases Β· devbis/z03mmc
IKEA Vindrikntning zigbee upgrade
Firmware to use lywsd03mmc to add your vindriktning sensor to zigbee network.
Instruction how to solder: https://github.com/devbis/z03mmc/tree/vindriktning?tab=readme-ov-file#ikea-vindriktning-upgrade
Zigbee2mqtt converter: https://raw.githubusercontent.com/devbis/z03mmc/vindriktning/converters/vindriktning.js
1.1.0
- added attribute to hide smiley
- added attribute to disable display updates
- added calibration attributes with offset for temperature/humidity values
- changed pressing timeout for reset to 5 seconds
- added switching to degrees Fahrenheit by holding reset for 1 second
- replace generic Telink manufacturer code to a custom one
- display battery symbol if <10% left
- battery state checks at every 100th sensor reading
Updated functionality is available in zigbee2mqtt starting from 1.35.3 out-of-the-box
Full Changelog: 1.0.6...1.1.0
1.0.6
- added cluster to toggle ΒΊC/ΒΊF
- modified converter to add a toggle for degrees Fahrenheit
- device now pauses between entering steering mode for a minute if not connected to network to save battery
- default reporting values are updated with the converter for consistency
- fixed applying configured reporting immediately
1.0.5
1.0.4
1.0.3
Note: update convertor go get more frequent updates
- increased polling to 10 seconds
- rewritten reporting (thanks to @slacky1965 )
- updated convertor to get more frequent reports
- increased resolution to 0.01 units
- battery consumption greatly improved