all: replace RemoveSubConn with Shutdown as much as possible

balancer/balancer.go

@@ -367,8 +367,9 @@ type Balancer interface {
 	// Deprecated: Use NewSubConnOptions.StateListener when creating the
 	// SubConn instead.
 	UpdateSubConnState(SubConn, SubConnState)
-	// Close closes the balancer. The balancer is not required to call
-	// ClientConn.RemoveSubConn for its existing SubConns.
+	// Close closes the balancer. The balancer is not currently required to
+	// call SubConn.Shutdown for its existing SubConns; however, this will be
+	// required in a future release, so it is recommended.
 	Close()
 }
 

balancer/base/balancer.go

@@ -121,7 +121,7 @@ func (b *baseBalancer) UpdateClientConnState(s balancer.ClientConnState) error {
 		sc := sci.(balancer.SubConn)
 		// a was removed by resolver.
 		if _, ok := addrsSet.Get(a); !ok {
-			b.cc.RemoveSubConn(sc)
+			sc.Shutdown()
 			b.subConns.Delete(a)
 			// Keep the state of this sc in b.scStates until sc's state becomes Shutdown.
 			// The entry will be deleted in UpdateSubConnState.
@@ -204,8 +204,8 @@ func (b *baseBalancer) UpdateSubConnState(sc balancer.SubConn, state balancer.Su
 	case connectivity.Idle:
 		sc.Connect()
 	case connectivity.Shutdown:
-		// When an address was removed by resolver, b called RemoveSubConn but
-		// kept the sc's state in scStates. Remove state for this sc here.
+		// When an address was removed by resolver, b called Shutdown but kept
+		// the sc's state in scStates. Remove state for this sc here.
 		delete(b.scStates, sc)
 	case connectivity.TransientFailure:
 		// Save error to be reported via picker.
@@ -226,7 +226,7 @@ func (b *baseBalancer) UpdateSubConnState(sc balancer.SubConn, state balancer.Su
 }
 
 // Close is a nop because base balancer doesn't have internal state to clean up,
-// and it doesn't need to call RemoveSubConn for the SubConns.
+// and it doesn't need to call Shutdown for the SubConns.
 func (b *baseBalancer) Close() {
 }
 

balancer/grpclb/grpclb.go

@@ -213,7 +213,7 @@ type lbBalancer struct {
 	backendAddrsWithoutMetadata []resolver.Address
 	// Roundrobin functionalities.
 	state    connectivity.State
-	subConns map[resolver.Address]balancer.SubConn   // Used to new/remove SubConn.
+	subConns map[resolver.Address]balancer.SubConn   // Used to new/shutdown SubConn.
 	scStates map[balancer.SubConn]connectivity.State // Used to filter READY SubConns.
 	picker   balancer.Picker
 	// Support fallback to resolved backend addresses if there's no response
@@ -290,7 +290,7 @@ func (lb *lbBalancer) regeneratePicker(resetDrop bool) {
 // aggregateSubConnStats calculate the aggregated state of SubConns in
 // lb.SubConns. These SubConns are subconns in use (when switching between
 // fallback and grpclb). lb.scState contains states for all SubConns, including
-// those in cache (SubConns are cached for 10 seconds after remove).
+// those in cache (SubConns are cached for 10 seconds after shutdown).
 //
 //	The aggregated state is:
 //	- If at least one SubConn in Ready, the aggregated state is Ready;
@@ -345,8 +345,8 @@ func (lb *lbBalancer) updateSubConnState(sc balancer.SubConn, scs balancer.SubCo
 	case connectivity.Idle:
 		sc.Connect()
 	case connectivity.Shutdown:
-		// When an address was removed by resolver, b called RemoveSubConn but
-		// kept the sc's state in scStates. Remove state for this sc here.
+		// When an address was removed by resolver, b called Shutdown but kept
+		// the sc's state in scStates. Remove state for this sc here.
 		delete(lb.scStates, sc)
 	case connectivity.TransientFailure:
 		lb.connErr = scs.ConnectionError

balancer/grpclb/grpclb_remote_balancer.go

@@ -113,7 +113,6 @@ func (lb *lbBalancer) refreshSubConns(backendAddrs []resolver.Address, fallback
 	}
 
 	balancingPolicyChanged := lb.usePickFirst != pickFirst
-	oldUsePickFirst := lb.usePickFirst
 	lb.usePickFirst = pickFirst
 
 	if fallbackModeChanged || balancingPolicyChanged {
@@ -123,13 +122,7 @@ func (lb *lbBalancer) refreshSubConns(backendAddrs []resolver.Address, fallback
 		// For fallback mode switching with pickfirst, we want to recreate the
 		// SubConn because the creds could be different.
 		for a, sc := range lb.subConns {
-			if oldUsePickFirst {
-				// If old SubConn were created for pickfirst, bypass cache and
-				// remove directly.
-				lb.cc.ClientConn.RemoveSubConn(sc)
-			} else {
-				lb.cc.RemoveSubConn(sc)
-			}
+			sc.Shutdown()
 			delete(lb.subConns, a)
 		}
 	}
@@ -144,7 +137,7 @@ func (lb *lbBalancer) refreshSubConns(backendAddrs []resolver.Address, fallback
 		}
 		if sc != nil {
 			if len(backendAddrs) == 0 {
-				lb.cc.ClientConn.RemoveSubConn(sc)
+				sc.Shutdown()
 				delete(lb.subConns, scKey)
 				return
 			}
@@ -197,7 +190,7 @@ func (lb *lbBalancer) refreshSubConns(backendAddrs []resolver.Address, fallback
 	for a, sc := range lb.subConns {
 		// a was removed by resolver.
 		if _, ok := addrsSet[a]; !ok {
-			lb.cc.RemoveSubConn(sc)
+			sc.Shutdown()
 			delete(lb.subConns, a)
 			// Keep the state of this sc in b.scStates until sc's state becomes Shutdown.
 			// The entry will be deleted in UpdateSubConnState.

balancer/grpclb/grpclb_util.go

@@ -24,6 +24,7 @@ import (
 	"time"
 
 	"google.golang.org/grpc/balancer"
+	"google.golang.org/grpc/grpclog"
 	"google.golang.org/grpc/resolver"
 )
 
@@ -91,7 +92,7 @@ func (r *lbManualResolver) UpdateState(s resolver.State) {
 const subConnCacheTime = time.Second * 10
 
 // lbCacheClientConn is a wrapper balancer.ClientConn with a SubConn cache.
-// SubConns will be kept in cache for subConnCacheTime before being removed.
+// SubConns will be kept in cache for subConnCacheTime before being shut down.
 //
 // Its NewSubconn and SubConn.Shutdown methods are updated to do cache first.
 type lbCacheClientConn struct {
@@ -149,7 +150,7 @@ func (ccc *lbCacheClientConn) NewSubConn(addrs []resolver.Address, opts balancer
 }
 
 func (ccc *lbCacheClientConn) RemoveSubConn(sc balancer.SubConn) {
-	sc.Shutdown()
+	grpclog.Errorf("RemoveSubConn(%v) called unexpectedly", sc)
 }
 
 type lbCacheSubConn struct {
@@ -168,9 +169,9 @@ func (sc *lbCacheSubConn) Shutdown() {
 
 	if entry, ok := ccc.subConnCache[addr]; ok {
 		if entry.sc != sc {
-			// This could happen if NewSubConn was called multiple times for the
-			// same address, and those SubConns are all removed. We remove sc
-			// immediately here.
+			// This could happen if NewSubConn was called multiple times for
+			// the same address, and those SubConns are all shut down. We
+			// remove sc immediately here.
 			delete(ccc.subConnToAddr, sc)
 			sc.SubConn.Shutdown()
 		}
@@ -214,7 +215,7 @@ func (ccc *lbCacheClientConn) UpdateState(s balancer.State) {
 func (ccc *lbCacheClientConn) close() {
 	ccc.mu.Lock()
 	defer ccc.mu.Unlock()
-	// Only cancel all existing timers. There's no need to remove SubConns.
+	// Only cancel all existing timers. There's no need to shut down SubConns.
 	for _, entry := range ccc.subConnCache {
 		entry.cancel()
 	}

balancer/grpclb/grpclb_util_test.go

@@ -25,6 +25,7 @@ import (
 	"time"
 
 	"google.golang.org/grpc/balancer"
+	"google.golang.org/grpc/grpclog"
 	"google.golang.org/grpc/resolver"
 )
 
@@ -61,7 +62,7 @@ func (mcc *mockClientConn) NewSubConn(addrs []resolver.Address, opts balancer.Ne
 }
 
 func (mcc *mockClientConn) RemoveSubConn(sc balancer.SubConn) {
-	sc.Shutdown()
+	grpclog.Errorf("RemoveSubConn(%v) called unexpectedly", sc)
 }
 
 const testCacheTimeout = 100 * time.Millisecond
@@ -87,7 +88,7 @@ func checkCacheCC(ccc *lbCacheClientConn, sccLen, sctaLen int) error {
 	return nil
 }
 
-// Test that SubConn won't be immediately removed.
+// Test that SubConn won't be immediately shut down.
 func (s) TestLBCacheClientConnExpire(t *testing.T) {
 	mcc := newMockClientConn()
 	if err := checkMockCC(mcc, 0); err != nil {
@@ -110,7 +111,7 @@ func (s) TestLBCacheClientConnExpire(t *testing.T) {
 		t.Fatal(err)
 	}
 
-	ccc.RemoveSubConn(sc)
+	sc.Shutdown()
 	// One subconn in MockCC before timeout.
 	if err := checkMockCC(mcc, 1); err != nil {
 		t.Fatal(err)
@@ -138,7 +139,7 @@ func (s) TestLBCacheClientConnExpire(t *testing.T) {
 	}
 }
 
-// Test that NewSubConn with the same address of a SubConn being removed will
+// Test that NewSubConn with the same address of a SubConn being shut down will
 // reuse the SubConn and cancel the removing.
 func (s) TestLBCacheClientConnReuse(t *testing.T) {
 	mcc := newMockClientConn()
@@ -162,7 +163,7 @@ func (s) TestLBCacheClientConnReuse(t *testing.T) {
 		t.Fatal(err)
 	}
 
-	ccc.RemoveSubConn(sc)
+	sc.Shutdown()
 	// One subconn in MockCC before timeout.
 	if err := checkMockCC(mcc, 1); err != nil {
 		t.Fatal(err)
@@ -195,8 +196,8 @@ func (s) TestLBCacheClientConnReuse(t *testing.T) {
 		t.Fatal(err)
 	}
 
-	// Call remove again, will delete after timeout.
-	ccc.RemoveSubConn(sc)
+	// Call Shutdown again, will delete after timeout.
+	sc.Shutdown()
 	// One subconn in MockCC before timeout.
 	if err := checkMockCC(mcc, 1); err != nil {
 		t.Fatal(err)
@@ -223,9 +224,9 @@ func (s) TestLBCacheClientConnReuse(t *testing.T) {
 	}
 }
 
-// Test that if the timer to remove a SubConn fires at the same time NewSubConn
-// cancels the timer, it doesn't cause deadlock.
-func (s) TestLBCache_RemoveTimer_New_Race(t *testing.T) {
+// Test that if the timer to shut down a SubConn fires at the same time
+// NewSubConn cancels the timer, it doesn't cause deadlock.
+func (s) TestLBCache_ShutdownTimer_New_Race(t *testing.T) {
 	mcc := newMockClientConn()
 	if err := checkMockCC(mcc, 0); err != nil {
 		t.Fatal(err)
@@ -251,9 +252,9 @@ func (s) TestLBCache_RemoveTimer_New_Race(t *testing.T) {
 
 	go func() {
 		for i := 0; i < 1000; i++ {
-			// Remove starts a timer with 1 ns timeout, the NewSubConn will race
-			// with with the timer.
-			ccc.RemoveSubConn(sc)
+			// Shutdown starts a timer with 1 ns timeout, the NewSubConn will
+			// race with with the timer.
+			sc.Shutdown()
 			sc, _ = ccc.NewSubConn([]resolver.Address{{Addr: "address1"}}, balancer.NewSubConnOptions{})
 		}
 		close(done)

balancer/weightedroundrobin/balancer.go

@@ -187,7 +187,7 @@ func (b *wrrBalancer) updateAddresses(addrs []resolver.Address) {
 		// addr was removed by resolver.  Remove.
 		wsci, _ := b.subConns.Get(addr)
 		wsc := wsci.(*weightedSubConn)
-		b.cc.RemoveSubConn(wsc.SubConn)
+		wsc.SubConn.Shutdown()
 		b.subConns.Delete(addr)
 	}
 }

balancer/weightedtarget/weightedtarget_test.go

@@ -241,12 +241,12 @@ func (s) TestWeightedTarget(t *testing.T) {
 	// attribute set to the config that was passed to it.
 	verifyAddressInNewSubConn(t, cc, setConfigKey(addr2, "cluster_2"))
 
-	// The subconn for cluster_1 should be removed.
-	scRemoved := <-cc.RemoveSubConnCh
-	if scRemoved != sc1 {
-		t.Fatalf("RemoveSubConn, want %v, got %v", sc1, scRemoved)
+	// The subconn for cluster_1 should be shut down.
+	scShutdown := <-cc.ShutdownSubConnCh
+	if scShutdown != sc1 {
+		t.Fatalf("ShutdownSubConn, want %v, got %v", sc1, scShutdown)
 	}
-	scRemoved.UpdateState(balancer.SubConnState{ConnectivityState: connectivity.Shutdown})
+	scShutdown.UpdateState(balancer.SubConnState{ConnectivityState: connectivity.Shutdown})
 
 	sc2 := <-cc.NewSubConnCh
 	sc2.UpdateState(balancer.SubConnState{ConnectivityState: connectivity.Connecting})
@@ -286,12 +286,12 @@ func (s) TestWeightedTarget(t *testing.T) {
 	}
 	verifyAddressInNewSubConn(t, cc, addr3)
 
-	// The subconn from the test_config_balancer should be removed.
-	scRemoved = <-cc.RemoveSubConnCh
-	if scRemoved != sc2 {
-		t.Fatalf("RemoveSubConn, want %v, got %v", sc1, scRemoved)
+	// The subconn from the test_config_balancer should be shut down.
+	scShutdown = <-cc.ShutdownSubConnCh
+	if scShutdown != sc2 {
+		t.Fatalf("ShutdownSubConn, want %v, got %v", sc1, scShutdown)
 	}
-	scRemoved.UpdateState(balancer.SubConnState{ConnectivityState: connectivity.Shutdown})
+	scShutdown.UpdateState(balancer.SubConnState{ConnectivityState: connectivity.Shutdown})
 
 	// Send subconn state change.
 	sc3 := <-cc.NewSubConnCh
@@ -409,12 +409,12 @@ func (s) TestWeightedTarget_OneSubBalancer_AddRemoveBackend(t *testing.T) {
 		t.Fatalf("failed to update ClientConn state: %v", err)
 	}
 
-	// Expect one SubConn to be removed.
-	scRemoved := <-cc.RemoveSubConnCh
-	if scRemoved != sc1 {
-		t.Fatalf("RemoveSubConn, want %v, got %v", sc1, scRemoved)
+	// Expect one SubConn to be shut down.
+	scShutdown := <-cc.ShutdownSubConnCh
+	if scShutdown != sc1 {
+		t.Fatalf("ShutdownSubConn, want %v, got %v", sc1, scShutdown)
 	}
-	scRemoved.UpdateState(balancer.SubConnState{ConnectivityState: connectivity.Shutdown})
+	scShutdown.UpdateState(balancer.SubConnState{ConnectivityState: connectivity.Shutdown})
 	p = <-cc.NewPickerCh
 
 	// Test pick with only the second SubConn.
@@ -579,7 +579,7 @@ func (s) TestWeightedTarget_TwoSubBalancers_MoreBackends(t *testing.T) {
 		t.Fatalf("want %v, got %v", want, err)
 	}
 
-	// Remove subConn corresponding to addr3.
+	// Shut down subConn corresponding to addr3.
 	if err := wtb.UpdateClientConnState(balancer.ClientConnState{
 		ResolverState: resolver.State{Addresses: []resolver.Address{
 			hierarchy.Set(addr1, []string{"cluster_1"}),
@@ -590,11 +590,11 @@ func (s) TestWeightedTarget_TwoSubBalancers_MoreBackends(t *testing.T) {
 	}); err != nil {
 		t.Fatalf("failed to update ClientConn state: %v", err)
 	}
-	scRemoved := <-cc.RemoveSubConnCh
-	if scRemoved != sc3 {
-		t.Fatalf("RemoveSubConn, want %v, got %v", sc3, scRemoved)
+	scShutdown := <-cc.ShutdownSubConnCh
+	if scShutdown != sc3 {
+		t.Fatalf("ShutdownSubConn, want %v, got %v", sc3, scShutdown)
 	}
-	scRemoved.UpdateState(balancer.SubConnState{ConnectivityState: connectivity.Shutdown})
+	scShutdown.UpdateState(balancer.SubConnState{ConnectivityState: connectivity.Shutdown})
 	p = <-cc.NewPickerCh
 	want = []balancer.SubConn{sc1, sc4}
 	if err := testutils.IsRoundRobin(want, testutils.SubConnFromPicker(p)); err != nil {
@@ -823,9 +823,9 @@ func (s) TestWeightedTarget_ThreeSubBalancers_RemoveBalancer(t *testing.T) {
 	// picker which ensures that the removed subBalancer is not picked for RPCs.
 	p = <-cc.NewPickerCh
 
-	scRemoved := <-cc.RemoveSubConnCh
-	if scRemoved != sc2 {
-		t.Fatalf("RemoveSubConn, want %v, got %v", sc2, scRemoved)
+	scShutdown := <-cc.ShutdownSubConnCh
+	if scShutdown != sc2 {
+		t.Fatalf("ShutdownSubConn, want %v, got %v", sc2, scShutdown)
 	}
 	want = []balancer.SubConn{sc1, sc3}
 	if err := testutils.IsRoundRobin(want, testutils.SubConnFromPicker(p)); err != nil {
@@ -865,9 +865,9 @@ func (s) TestWeightedTarget_ThreeSubBalancers_RemoveBalancer(t *testing.T) {
 	// Removing a subBalancer causes the weighted target LB policy to push a new
 	// picker which ensures that the removed subBalancer is not picked for RPCs.
 
-	scRemoved = <-cc.RemoveSubConnCh
-	if scRemoved != sc1 {
-		t.Fatalf("RemoveSubConn, want %v, got %v", sc1, scRemoved)
+	scShutdown = <-cc.ShutdownSubConnCh
+	if scShutdown != sc1 {
+		t.Fatalf("ShutdownSubConn, want %v, got %v", sc1, scShutdown)
 	}
 
 	ctx, cancel := context.WithTimeout(context.Background(), defaultTestTimeout)