Skip to content

@dizmo/generator-dizmo: a dizmo generator for JavaScript, CoffeeScript and Typescript

License

Notifications You must be signed in to change notification settings

dizmo/yeoman-generator-dizmo

Repository files navigation

NPM version Build Status

@dizmo/generator-dizmo

Dizmo generator

Table of contents

Prerequisites

How does dizmoGen work?

DizmoGen is a generator to create a project folder that contains a skeleton for a new dizmo. Further, the build scripts needed to turn the source code into a packed and installable dizmo artifact (*.dzm) are present as well. The generator itself is based on the Yeoman generator toolkit. After the initial generation of a project, neither dizmoGen nor Yeoman are required anymore to build your dizmo.

Use any text editor or IDE to edit the generated source code. Once ready you can use the build scripts to turn your project into a correctly formatted and packed dizmo: Invoking npm run <script> uses internally a Node.js based tool named gulp, which orchestrates the entire build process to turn your source code into a dizmo. Possible <script> commands are build, lint, clean etc.

As the totality of all build scripts with their dependencies account for more than 100 MBytes, the dependencies are excluded when pushing a source folder to a remote Git repository. So, if you get a dizmo project from an external origin it is necessary to install them first. This is done within the build process automatically or can be triggered manually by invoking npm install from within the project folder, which will create a folder named node_modules, which should never be included in the Git repository!

The options and commands available to build, test and deploy dizmos will be upgraded from time to time. In such a case it may become necessary to update the relevant build scripts using dizmoGen (and Yeoman) again. Check the Upgrading the Build System section below about how to update your version of dizmoGen and the build scripts in your own dizmo project.

Installation

First, install Yeoman and generator-dizmo using npm (we assume you have Node.js pre-installed):

npm install -g yo
npm install -g @dizmo/generator-dizmo

Note: On most operating systems the -g option (shortcut for --global) requires super user (administrator) rights. Due to security considerations however, avoid using such a privileged account and see the FAQ to be able to install global packages as a regular user.

Quick start

Invoke the dizmo generator with a name of your choice, for example my-dizmo and answer a few questions:

yo @dizmo/dizmo my-dizmo

After a successful build via npm run build, drag and drop the ./build/MyDizmo-0.0.0.dzm file onto dizmoViewer: You should see the front side of the dizmo with Hello World! written on it. The name parameter is optional and can be changed at the prompt. Further, calling yo @dizmo/dizmo is equivalent to invoking the default generator with yo @dizmo/dizmo:app.

To list all possible arguments and options of the generator, enter:

yo @dizmo/dizmo --help

Caching

Npm uses a built in cache mechanism to accelerate package installation. There are various configuration options to control the behaviour of the cache. Here, we are interested in cache-min:

The minimum time (in seconds) to keep items in the registry cache before re-checking against the registry.

The provided default of 10 seconds is too short, to efficiently make use of caching. Therefore, we recommend setting it to for example to a day by running the configuration command:

npm config set cache-min 86400

By setting chache-min to this value, you ensure that no package with a timestamp younger than a day is checked against the central registry for a possible update. This can significantly improve your npm experience.

Further, we suggest to clear the cache initially by running npm cache clean, but this is not necessarily required: It will simply wipe out your cached packages, and ensure that no corrupted cache exists. However, this also means that your very first dizmo skeleton generation (and corresponding installation of npm packages) may take longer than later invocations. By running npm cache ls you can determine, which npm packages have already been cached.

Note: It is recommended to clean the cache also before an update of the generator-dizmo generator itself, by running npm cache clean.

Questions

At the start, you will be asked a few questions, after which the terminal should look similar to:

yo @dizmo/dizmo
     _-----_
    |       |    .--------------------------.
    |--(o)--|    |  Welcome to the awesome  |
   `---------´   |     dizmo generator!     |
    ( _´U`_ )    '--------------------------'
    /___A___\
     |  ~  |
   __'.___.'__
 ´   `  |° ´ Y `

? Name your dizmo: MyDizmo
? Describe it: My Dizmo
? And its bundle ID? com.example.my_dizmo
? What's your name? Name Surname
? And your email? name.surname@mail.net

The dizmo generator asks you some questions – let's have a look at them:

? Name your dizmo: MyDizmo

If no dizmoName argument is provided then by default MyDizmo will be suggested: accept or change it as desired. This name will be used to create a project folder in the current director. For example, for the MyDizmo name the folder will be my-dizmo/.

? Describe it: My Dizmo

You should provide a short succinct description of your project. By default the name of the current dizmo will be taken as a base for a suggestion.

? And its bundle ID? com.example.my_dizmo

Each dizmo is required to have a unique bundle.identifier, which is a name of the bundle each dizmo instance will belong to: For example, each sticky note dizmo would have the same com.dizmo.stickynote bundle ID (but with different dizmo IDs). Choose as a prefix the domain of your company (in reverse notation with top level domain names like com or org preceding the rest), and then append a name related to the dizmo.

? What's your name? Full Name

Provide your full name, to designate yourself as the author of the project. By default, the current GIT user name – if available – or OS login will be used directly without actually prompting for the name. Otherwise, anything you enter here will be remembered and automatically used as the default on your next invocation of yo @dizmo/dizmo.

The entry will be stored once the project skeleton is setup in package.json under person.name. For multiple contributors, see the npm:package.json documentation, section people-fields-author-contributors.

? And your email? my@email.net

Provide your email, so people can reach out to you for feedback, bug reports etc. By default the generator uses the GIT user email – if available – or the MAIL environment variable.

The entry will be stored in package.json under person.email. For multiple contributors, see again people-fields-author-contributors.

Upgrading the Build System

Since the build system of each dizmo is saved directly within a project, we need an upgrade mechanism of the former for an existing latter. But first, we have to upgrade generator-dizmo by running:

npm upgrade -g @dizmo/generator-dizmo

Then within an existing project's main folder, we can execute:

yo @dizmo/dizmo --upgrade

It is also possible to only invoke yo @dizmo/dizmo, in which case each and every conflict between the existing and new files and folders need to be manually signed-off by the user. Since all conflicts need to be decided on, instead of just the conflicts w.r.t. the build system, this manual upgrading can be onerous. However, with the yo @dizmo/dizmo --upgrade command, only the build system of the actual project is upgraded, while the non-build related files and folders remain (mostly) untouched.

Skeleton

After you have answered the last question, the generator will create the project's skeleton. If you have the tree command installed on your operating system, then you can visualize the directory structure with:

tree
.
├── .eslintrc.json
├── assets
│   ├── Icon-dark.svg
│   ├── Icon.svg
│   ├── locales
│   │   ├── translation.de.json
│   │   └── translation.en.json
│   └── Preview.png
├── gulp
│   ├── package.js
│   ├── tasks
│   │   └── *
│   └── tools
│       └── *
├── gulpfile.js
├── help
│   └── en
│       ├── help.md
│       └── placeholder-400x275.png
├── jsdoc.json
├── LICENSE
├── package.json
├── README.md
├── source
│   ├── index.html
│   ├── index.js
│   ├── lib
│   │   └── i18n-*.min.js
│   └── style
│       └── style.scss
├── test
│   └── test.js
└── webpack.config.js

Let's have a look at each ot the top level files and directories:

  • .eslintrc.json: a JSON file, which can be used to configure the linting process for the JavaScript code; see eslint.org/docs/user-guide/configuring for further information.

  • assets: A folder containing asset files like images, which can be accessed from within the dizmo using a relative path like assets/Preview.png. Put any such files (or media) which are not directly related to styling into this folder. You can also create sub-folders or any nested directory structure according to your needs. One such folder is assets/locales where JSON files for translation purposes can be found.

  • gulp: A folder containing a build system based on gulp. If you are familiar with gulp, then you can change the build mechanism according to your needs; otherwise, just use it as it is.

  • gulpfile.js: The main script driving the gulp build system; usually you can leave this file as it is.

  • help: Once you have developed your dizmo, you might want to provide user documentation, which can be placed in this folder.

  • jsdoc.json: Configuration file to be used by the integrated documentation system.

  • LICENCE: By default an ISC (Internet Software Consortium) license is generated, which is functionally equivalent to the simplified BSD and MIT licenses, but with a simpler language. Leave or change this according to your needs.

  • package.json: This is an important file! It is consumed by the npm package manager, provides run scripts for the build system (like lint, clean, build, install etc.), and allows to change the dizmo settings. Have a look below at the corresponding section for further information.

  • README.md: A simple shortened version of this README.md; it is meant to provide a quick overview, and can then be replaced with a project specific content.

  • source: A folder containing your own scripts for your dizmo, like index.html and index.js plus style sheets under style/, which use by default SASS. Further, in the source/lib/ folder you can put third party libraries, which you can then directly reference via a <script> tag in the index.html markup.

  • test: A folder containing your test cases.

  • webpack.config.js: project wide configuration file for the webpack bundler.

Package manager: package.json

Dizmos use npm as a package manager; to thoroughly understand its functionality, please consult "What is npm?" and work through the 15 small video based tutorials in the Getting Started section.

Dizmo section

In addition to the default entries of npm the package.json file contains a dizmo section:

"dizmo": {
    "settings": {
        "attributes": {
            "settings/usercontrols/allowresize": true
        },
        "bundle-identifier": "com.example.my_project",
        "bundle-name": "My Project",
        "category": "",
        "height": 360,
        "tags": [
            "my-project"
        ],
        "width": 480
    },
    "store": {
        "host": "https://store-api.dizmo.com"
    }
}

And here is a list of available options:

  • settings: any entry provided here will be translated to an entry in build/Info.plist, which is the main control file defining the properties of a dizmo. Two properties, that you might also need to set, are api-version and elements-version. If you want to downgrade the generated skeleton, so that it is compatible with older versions of dizmoViewer, you would set them for example to 1.3 and 1.0 respectively. The attributes object allows you to set attributes of a dizmo even before the JavaScript gets executed. For a full list of all the attributes that can be set please refer to the data tree page in our documentation.

  • store: configuration entries required by npm run upload, which needs store/host (by default pointing to https://store-api.dizmo.com), store/user and store/pass. The latter two should not be directly set in package.json but instead via the default configuration (see below), to avoid the store credentials getting accidentally committed to a version control system.

Default Configuration

The dizmo section in package.json can be extended with default values, which have to reside in .generator-dizmo/config.json (in any of the parent directories):

{
    "dizmo": {
        "deploy-path": "..", "store": {
            "host": "https://store-api.dizmo.com",
            "user": "..",
            "pass": ".."
        }
    }
}

The configuration is hierarchical and recursive, meaning that a .generator-dizmo/config.json file can be saved in any parent directory of the current project, all of which are then merged during the build dynamically into package.json, where configuration values from files in the lower levels (meaning closer to package.json) have precedence.

Yeoman: Managing Configuration

As an alternative to .generator-dizmo/config.json the .yo-rc.json file can be used to store default configuration values; see the managing configuration section for further information.

NPM scripts

Before running any script, please ensure that npm install has been executed, and that the dependencies beneath node_modules are up to date!

Please read first about npm#scripts – in each package.json the following scripts are available:

  • clean: completely removes the ./build sub-directory.
npm run clean
  • deploy: builds and installs the dizmo to a installation path given by the dizmo/deploy-path configuration entry in package.json (or better in .generator-dizmo/config.json):
npm run deploy
  • deploy: ..or if the DZM_DEPLOY_PATH environment variable has been defined, then the dizmo is copied to the corresponding location.
DZM_DEPLOY_PATH=/path/to/my/dizmos npm run deploy
  • lint: applies linting to your source code using ESLint, which can be configured via the .eslintrc.json file.
npm run lint
  • build: builds the dizmo (including the *.dzm artifact) from scratch and puts it into the ./build sub-directory.
npm run build
  • build: ..or if the DZM_UPGRADE_CHECK environment variable has been defined, then the dizmo is build accordingly with or without the upgrade check.
DZM_UPGRADE_CHECK=false npm run build
  • test: ensures to run tests – returns and error code of 0 for success and 1 for failure.
npm run test
  • docs: generates documentation in the ./docs sub-directory by using in-source comments.
npm run docs
  • watch: watches your source code, and incrementally (and quickly!) rebuilds the dizmo on any change.
npm run watch
  • watch: ..further, it copies the build to the installation path, if either the dizmo/deploy-path configuration has been set in package.json (or better in .generator-dizmo/config.json) or the DZM_DEPLOY_PATH environment variable has been provided.
DZM_DEPLOY_PATH=/path/to/my/dizmos npm run watch
  • upload: uploads a *.dzm artifact to the dizmoStore requiring a host and user name plus a valid password. They can be set via the store/host, store/user and store/pass entries in package.json (or better in .generator-dizmo/config.json) or via the DZM_STORE_HOST, DZM_STORE_USER and DZM_STORE_PASS environment variables.
DZM_STORE_USER="username" DZM_STORE_PASS="password" npm run upload

CLI options

The build process supports command line arguments: It is important to realize that this CLI support is directly integrated via the underlying primitives, for example linting can be enabled or disabled via --lint or via --no-lint, and this argument can be provided to any script which depends on the linting step.

In many cases the arguments are boolean flags which can enable or disable a certain build step (like linting or minification). But many can also accept specific configuration objects – like JSON: For example, the linting of JavaScript is controlled via an eslint specific configuration object.

However, for the daily usage the default settings should be more than enough: Simply using the CLI arguments as boolean flags to enable or disable a particular step will do the job. Further, please notice that when you for example disable linting, then during the build the corresponding step will still be shown, but it will not perform any actual linting!

Linting: --lint or --no-lint

On the command line linting can be enabled by providing --lint (which is the case by default), and it can be disabled by providing --no-lint. Hence, the following will lint and build the dizmo:

npm run build

To stop the build engine from linting, it can directly be overridden on the CLI:

npm run build -- --no-lint

The double hyphen after npm run build is necessary, since it tells NPM to forward the --no-lint argument to each build sub-step, which combined will build the dizmo. If you do not like the four consecutive hyphens, you can provide the script name also after the initial double hyphen:

npm run -- build --no-lint

Or more verbosely, below you see in its clearest form how the build script is run with the additional argument of --no-lint:

npm run-script -- build --no-lint

Conversely, if you explicitly want to enforce linting then you can execute:

npm run -- build --lint

As mentioned, this is in general not required since linting is by default on. However, if you are not sure if this is the case ‐ for example, when you are putting together a build environment and want enforce linting ‐ then providing the --lint flag explicitly makes sense.

The specific configuration objects for controlling eslint, coffeelint and tslint can be looked up via their respective documentation. Below some very simple examples have been shown, to demonstrate the corresponding capability to override the defaults.

  • Enforce for a JavaScript based dizmo project linting, but ignore unused variable names:
npm run build -- --lint='{"rules":{"no-unused-vars":0}}'
  • Enforce linting, but provide a warning w.r.t. unused variable names:
npm run build -- --lint='{"rules":{"no-unused-vars":1}}'
  • Enforce linting, but provide an error w.r.t. unused variable names:
npm run build -- --lint='{"rules":{"no-unused-vars":2}}'

Above, in case of an error the build process will not fail, effectively making it equivalent to a warning. If such behaviour is not desired, then the lint.js gulp task should be modified to stop the build process upon a linting error.

Minification: --minify or --no-minify

Providing the --minify option on the CLI will ensure that the scripts, styles and markup are automatically minified:

npm run build -- --minify

Please notice, that by default source maps are not created – to avoid accidental leaks of potential intellectual property. However by appending the --sourcemaps flag they can be enabled:

npm run build -- --minify --sourcemaps

It is also possible to suppress a minification:

npm run build -- --no-minify

Further, since minification consists of five sub-steps, namely (a) markup minification, (b) style minification, (c1) script obfuscation plus (c2) minification and also (d) source maps generation -- where (c1) and (d) however need to be explicitly enabled -- it is possible to control them independently of the general --minify flag:

npm run build -- --minify --closure --htmlmin --sass --no-obfuscate --no-sourcemaps

The above set of arguments is (given default webpack.config.js) equivalent to the --minify flag. Further, each of them can be negated as well:

npm run build -- --no-minify --no-terser --no-htmlmin --no-sass --obfuscate --sourcemaps

Further, each flag can accept an optional configuration object to control in detail the corresponding minification, obfuscation and source map generation steps:

  • Minify the scripts; see webpack-mode for further information w.r.t. to the configuration:
npm run build -- --minify='{"mode":"production"}'
npm run build -- --minify --terser='{"keep_fnames":true}'
  • Minimize the markup; see gulp-htmlmin for further information w.r.t. to the configuration:
npm run build -- --minify --htmlmin='{"collapseWhitespace":true}'
  • Minimize the styles; see gulp-sass for further information w.r.t. to the configuration:
npm run build -- --minify --sass='{"outputStyle":"compressed"}'
  • Obfuscate the scripts; see webpack-obfuscator for further information w.r.t. to the configuration:
npm run build -- --minify --obfuscate='{"compact":true}'
  • Create source maps for the scripts and the styles (in package.json each source map generation can be configured separately, however on the CLI there is only a single flag to control both); see gulp-sourcemaps for further information w.r.t. to the configuration:
npm run build -- --minify --sourcemaps='{"loadMaps":true}'

In general, using --minify (or --no-minify) combined with the --sourcemaps (or --no-sourcemaps) CLI options should be enough. Only if explicit control is required, using the --htmlmin, --sass or --obfuscate flags is necessary. Further, providing configuration objects to these flags should only be done, when you know what you are doing (or are not happy with the provided defaults).

Bundling: --webpack

A dizmo project uses webpack to control how a dizmo is bundled – using webpack.config.js, which in general can be left as it is! However, if the need should arise to modify the bundling process, then either webpack.config.js can be modified directly, or (in case no permanent change is desired then) the --webpack CLI option can be utilized. For example, to disable the babel-loader module on the fly one could run:

for JavaScript dizmos

NO_BABEL_JS='{"module":{"rules":[]}}' ## or: '{"module":{}}'
npm run build -- --webpack="$NO_BABEL_JS"

for CoffeeScript dizmos

NO_BABEL_CS='{"module":{"rules":[{"test":"/\\\\.coffee$/i","loader":"coffee-loader"}]}}'
npm run build -- --webpack="$NO_BABEL_CS"

and for TypeScript dizmos

NO_BABEL_TS='{"module":{"rules":[{"test":"/\\\\.tsx?$/i","use":"ts-loader"}]}}'
npm run build -- --webpack="$NO_BABEL_TS"

...where it's recommended to export the NO_BABEL_JS, NO_BABEL_CS and/or NO_BABEL_TS constants in one's shell environment – if they are used often. These constants can be derived, by modifying the webpack.config.js as one sees fit, and then converting the relevant portions into a minified JSON format.

Upload

Dizmo offers a dizmoStore where dizmos can be uploaded to: Besides package.json (or .generator-dizmo/config.json) and environment variables, upload arguments like the host and user name plus password can also be provided via the CLI:

npm run upload -- --host=https://store-api.dizmo.com --user='..' --pass='..'

By default npm run upload tries to upload and publish an uploaded dizmo. However, it is possible to skip the publication step by running:

npm run upload -- --no-publish

And then only in a subsequent step to publish it:

npm run upload -- --publish

However the command above assumes, that the actual upload has already been performed! Hence, executing it without having previous uploaded a dizmo will fail, since there would be no uploaded dizmo to publish.

Build

Once your dizmo is build, a build/ folder with the following structure is created:

tree build/
build/
├── MyDizmo
│   ├── Icon-dark.svg
│   ├── Icon.svg
│   ├── Info.plist
│   ├── Preview.png
│   ├── assets
│   │   └── locales
│   │       ├── translation.de.json
│   │       └── translation.en.json
│   ├── help.zip
│   ├── index.html
│   ├── index.js
│   ├── lib
│   │   └── i18n-*.min.js
│   └── styles
│       └── styles.css
└── MyDizmo-0.0.0.dzm
  • MyDizmo-0.0.0.dzm: A ZIP archive of the MyDizmo folder with a version suffix, which has been defined in package.json. Please see semantic versioning and npm for further information.

    In dizmoViewer (desktop edition) only the dizmo bundle with the highest version number is cached! Therefore, it is important to increase the version, when releasing a dizmo to your audience. However, simply changing the version suffix in the *.dzm file name will not work: The version is required to be set in MyDizmo/Info.plist (which happens automatically based on the version information in package.json).

  • MyDizmo/Info.plist: a list of properties (in XML notation) defining a dizmo. This file is derived from the original .info.plist template, which has been enriched with information from package.json.

  • MyDizmo/assets: a copy of the original assets folder;

  • MyDizmo/help.zip: a ZIP archive of the original help folder;

  • MyDizmo/index.html: the main HTML script;

  • MyDizmo/index.js: the main JavaScript bundle;

  • MyDizmo/lib/i18n-*.min.js: i18n internationalization wrapper;

  • MyDizmo/styles/styles.css: cascading stylesheets.

Dizmo instantiation

By dragging and dropping the MyDizmo-0.0.0.dzm artifact onto dizmoViewer a corresponding dizmo can be instantiated. If it has not been already installed, it will get installed to the default location as well.

Extended sub-generators

Once you have accommodated yourself with some basic dizmo development, you can go further and try out the dizmo:sub-coffeescript and dizmo:sub-typescript sub-generators. For CoffeeScript projects use:

yo @dizmo/dizmo --git --coffeescript

And for TypeScript projects use:

yo @dizmo/dizmo --git --typescript

Further, there are sub-generators for other projects (like @dizmo/generator-dizmo-react and @dizmo/generator-dizmo-vue); search the NPM registry for generator-dizmo to get a list of possible sub-generators.

Family of Generators

Miscellanea

GIT initialization

Invoke a generator combined with the --git option:

yo @dizmo/dizmo my-dizmo --git

The created project folder will now be named my-dizmo.git, and it will be initialized as a GIT repository – no commits will be performed though. Further, this only will work if the git command is accessible.

Dependency management

All (sub-)generators support dependency management using Node modules: You can structure your dizmo code using require statements plus the exports and module.exports objects. Using the more modern import and export statements is also possible. Additionally, you can install external third party libraries and reference them directly with require or import. For example, to use jQuery run:

npm install jquery

Then in your code you can get a reference with:

const $ = require('jquery');

Or better with:

import $ from 'jquery';

If you want to remove an installed library just run:

npm remove jquery

This approach works well, as long as the external libraries are not too large, since otherwise the build process may take longer. In such cases you should use the incremental builder using the watcher:

npm run watch

Or you can simply drop a library into the source/lib/ sub-directory and reference it via a corresponding <script> tag in the index.html markup.

Troubleshooting/FAQ

Did I forget to run npm install?

If npm install is not run before attempting to build a dizmo, then a message similar to the one below might be produced:

error argv "/usr/local/bin/node" "/usr/local/bin/npm" "run" "build"
error code ELIFECYCLE
error MyDizmo@0.0.0 build: `node ./node_modules/gulp/bin/gulp.js`
error Exit status 1
error Failed at the MyDizmo@0.0.0 build script 'node ./node_modules/gulp/bin/gulp.js'.

In such a case, just run npm install to ensure that all the required dependencies get installed locally.

I cannot install yo globally with npm install -g?

You have to set up npm for global installations, since yo should neither be installed nor run with sudo. The preferred approach here is to enable npm to install packages globally without breaking out of the $HOME folder, by setting a local node prefix. This is achieved for example by running

echo 'prefix = ~/.node' >> ~/.npmrc

in your local shell. After that the $PATH environment variable needs to be modified as well, to point to the new installation destination for the global node executables, by adjusting your favorite shell's configuration – for example use:

export PATH="$PATH:$HOME/.node/bin"

in your ~/.bashrc. After that, you can happily run npm install -g yo without sudo and without running into potential permission conflicts. Further, later-on if something gets completely broken and you want to start from scratch, all you need to do is to remove your ~/.node directory.

But, I prefer to run yo @dizmo/dizmo as root?

The Yeoman toolkit very strongly discourages the usage of any generator based on it to be run as root. Hence, you will get the following error:

sudo yo @dizmo/dizmo --help
/usr/lib/node_modules/yo/node_modules/configstore/index.js:53
    throw err;
    ^

Error: EACCES: permission denied, open '/root/.config/configstore/insight-yo.json'.
You don't have access to this file.

The same error is thrown, when you run sudo yo -h as well. Also, the behavior is independent of the usage of sudo or directly being logged in as root. Please see the answer to the previous question to be able to use yo without sudo.

What is Webpack? How do I configure it?

At its core, webpack is a static module bundler for modern JavaScript applications. The dizmo generator creates projects which can then be configured by editing the webpack.config.js file. See webpack.js.org/concepts for an introduction to basic concepts like entry, output, loaders, plugins, mode and browser compatibility.

How to create a .generator-dizmo folder on Windows?

The graphical user interface of Windows does not allow to create a folder named .generator-dizmo: However it is possible to create one via the command line interface. For example using the Windows PowerShell one can run:

PS C:\Users\user> mkdir .generator-dizmo

How to ignore .DS_Store files on Mac OS X?

Such files are device dependent and hence should be ignored globally on the developer's device, instead on a per project basis. See How to Remove .DS_Store File from a Git Repo on Mac OS X for an excellent discussion of the issue. Also see ignoring files to learn about setting up a global ignore list.

Missing index.ts script?

Older versions of the TypeScript generator were not creating an index.ts script, but newer ones do. However, if an older project is upgraded then the index.ts is not post-generated, because it might be that the main entry script of the original project has changed. Introducing a heuristic to automate this (meanwhile rare) edge-case has been avoided. Just manually creating an index.ts with usually the following content should resolve any corresponding build problems:

export { App } from './app/app';

Security Audits

The npm tool offers the npm audit and npm audit fix commands, which scan your project for vulnerabilities and automatically install any compatible updates for corresponding dependencies. Run npm help audit to get an in-depth description about this tool.

Copyright

© dizmo AG, Switzerland