Merge pull request betaflight#10530 from tstibor/bat_capacity

Battery capacity CLI name is bat_capacity not battery_capacity
dkustec · Feb 8, 2021 · 2467b32 · 2467b32
2 parents 29f6dd0 + d1a402d
commit 2467b32
Show file tree

Hide file tree

Showing 2 changed files with 2 additions and 2 deletions.
diff --git a/docs/Battery.md b/docs/Battery.md
@@ -101,7 +101,7 @@ Configure the current meter type using the `amperage_meter_type` settings here:
 | ADC     | ADC/hardware sensor    |
 | VIRTUAL | Virtual sensor         |
 
-Configure capacity using the `battery_capacity` setting, in mAh units.
+Configure capacity using the `bat_capacity` setting, in mAh units.
 
 If you're using an OSD that expects the multiwii current meter output value, then set `multiwii_amperage_meter_output` to `ON` (this multiplies amperage sent to MSP by 10 and truncates negative values)).
 

diff --git a/docs/Cli.md b/docs/Cli.md
@@ -175,7 +175,7 @@ Click on a variable to jump to the relevant documentation page.
 | `frsky_unit`                                  | IMPERIAL (default), METRIC                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               |        |        | IMPERIAL         | Master       | UINT8    |
 | [`frsky_vfas_precision`](Telemetry.md)        | Set to 1 to send raw VBat value in 0.1V resolution for receivers that can handle it, or 0 (default) to use the standard method                                                                                                                                                                                                                                                                                                                                                                                           | 0      | 1      | 0                | Master       | UINT8    |
 | `hott_alarm_sound_interval`                   | Battery alarm delay in seconds for Hott telemetry                                                                                                                                                                                                                                                                                                                                                                                                                                                                        | 0      | 120    | 5                | Master       | UINT8    |
-| [`battery_capacity`](Battery.md)              | Battery capacity in mAH. This value is used in conjunction with the current meter to determine remaining battery capacity.                                                                                                                                                                                                                                                                                                                                                                                               | 0      | 20000  | 0                | Master       | UINT16   |
+| [`bat_capacity`](Battery.md)              | Battery capacity in mAH. This value is used in conjunction with the current meter to determine remaining battery capacity.                                                                                                                                                                                                                                                                                                                                                                                               | 0      | 20000  | 0                | Master       | UINT16   |
 | [`vbat_scale`](Battery.md)                    | Result is Vbatt in 0.1V steps. 3.3V = ADC Vref, 4095 = 12bit adc, 110 = 11:1 voltage divider (10k:1k) x 10 for 0.1V. Adjust this slightly if reported pack voltage is different from multimeter reading. You can get current voltage by typing "status" in cli.                                                                                                                                                                                                                                                          | 0      | 255    | 110              | Master       | UINT8    |
 | [`vbat_max_cell_voltage`](Battery.md)         | Maximum voltage per cell, used for auto-detecting battery voltage in 0.1V units, default is 43 (4.3V)                                                                                                                                                                                                                                                                                                                                                                                                                    | 10     | 50     | 43               | Master       | UINT8    |
 | [`vbat_min_cell_voltage`](Battery.md)         | Minimum voltage per cell, this triggers battery-critical alarms, in 0.1V units, default is 33 (3.3V)                                                                                                                                                                                                                                                                                                                                                                                                                     | 10     | 50     | 33               | Master       | UINT8    |