Human Essentials is an inventory management system that was built to address the needs of Diaper Banks as directly and explicitly as possible and later adapted to meet the need of other Essentials Banks. Essentials Banks maintain inventory, receive donations and other means of intaking human essentials supplies (e.g. diapers, period supplies), and issue distributions to community partner organizations. Like any non-profit, they also need to perform reports on this data and have day-to-day operational information they need as well. This application aims to serve all those needs, as well as facilitate, wherever possible the general operations of the Diaper Bank themselves (eg. through using barcode readers, scale weighing, inventory audits).
Human Essentials has over 200 registered banks across the United States at no cost to them. It is currently helping over 3 million children receive diapers and over 400k period supply recipients receive period supplies. Our team is in partnership with the National Diaper Bank Network (NDBN) and can be found in their annual conference that brings numerous of non-profit organizations that distribute essential products to people.
We are proud of our achievements up to date but there is much more to do! This is where you come in...
π The Digital Public Goods Alliance recognizes Human Essentials as a digital public good (DPG)
- SDG 1 - End poverty in all its forms everywhere
- SDG 3 - Ensure healthy lives and promote well-being for all at all ages
- SDG 10 - Reduce inequality within and among countries
Human Essentials is one of many projects initiated and run by Ruby for Good. You can find out more about Ruby for Good at https://rubyforgood.org
NGO Adoption Info - information about how to use this DPG
Skills Based Volunteering Info - information about how to volunteer
Thanks for checking us out!
If you're new here, here are some things you should know:
- We actively curate issues and try to make them as self-contained as possible for people new to the application; those ones are tagged "Help Wanted"
- We're actively watching for Pull Requests and you shouldn't have to wait very long for a review. Try to make sure your build passes (
rubocop -ais a frequent need) and that you've addressed the requirements in the issue - Check the Contributing Guidelines section for a guide on how to get started
- This is a 100% volunteer-supported project, please be patient with your correspondence. We do handle issues and PRs with more fervor during Hacktoberfest & Conferences, but most (all?) of us have day jobs and so responses to questions / pending PRs may not be immediate. Please be patient, we'll get to you! :)
Please feel free to join us on Slack! You can sign up here and find us in #human-essentials.
There are numerous other folks that can chime in and answer questions -- please ask and someone will probably be there to help!
You will need to first install the required ruby version specified in the .ruby-version file. GoRails has a very detail oriented guide for installing ruby on Ubuntu, Windows, and macOSX. You can check out that guide here. Follow only the Installing Ruby step, as our project setup differs
It is highly recommended you use a ruby version manager such as:
You can verify that your ruby installation was successful and matches the version in .ruby-version in the project directory:
ruby -v
Once you've successfully installed ruby. You may proceed to the next section!
My RBENV installation did not work The rbenv repository provides a rbenv-doctor script to verify the state of the rbenv installation and if a ruby version is installed
You must install postgres and run the database locally. Instructions differ depending on the operating system.
Follow one of these guides to install postgres:
This app uses PostgreSQL for all environments. You'll also need to create the dev and test databases, the app is expecting them to be named diaper_dev and diaper_test respectively. This should all be handled with rails db:setup.
Create a database.yml file on config/ directory with your database configurations. You can also copy the existing files called database.yml.example and .env.example as an example and just change the credentials.
- MacOSX - https://www.digitalocean.com/community/tutorials/how-to-use-postgresql-with-your-ruby-on-rails-application-on-macos
- Ubuntu - https://www.digitalocean.com/community/tutorials/how-to-use-postgresql-with-your-ruby-on-rails-application-on-ubuntu-18-04
- Windows - Do you develop on windows? We'd love to hear (and for you to submit a PR explaining) how you do it. ππ»
After completing this step, you should have both ruby and postgres installed. Now you can proceed to the next step which is to setup the application.
Run the following command should run all the neccessary steps to get up and running.
bin/setup
Run the following command to start the server locally.
bin/start
You should be able to open up a browser and goto http://localhost:3000/ and see the human essentials page.
To login to the web application, use these default credentials:
Super Users
username: superadmin@example.com
password: password!
Bank users
Organization Admin
Email: org_admin1@example.com
Password: password!
User
Email: user_1@example.com
Password: password!Partner Users
Verified Partner
Email: verified@example.com
Password: password!
Invited Partner
Email: invited@pawneehomeless.com
Password: password!
Unverified Partner
Email: unverified@pawneepregnancy.com
Password: password!
Recertification Required Partner
Email: recertification_required@example.com
Password: password!Let's recap! You should now be able to run bin/start and login as one of the sample users to see their dashboard. If you've gotten to that point, you are ready to start contributing!
Please let us know by opening up an issue! We have many new contributors come through and it is likely what you experienced will happen to them as well. Documentation often goes out of date... documentations... ama'right?
Please feel free to contribute! While we welcome all contributions to this app, pull-requests that address outstanding Issues and have appropriate test coverage for them will be strongly prioritized. In particular, addressing issues that are tagged with the next milestone should be prioritized higher.
To contribute, do these things:
- Identify an issue you want to work on that is not currently assigned to anyone
- Assign it to yourself (so that no one else works on it while you are)
- (If not already a Contributor, fork the repo first)
- Checkout a new issue branch -- there's no absolute requirements on this, but we encourage the branch name format
XXX-brief-description-of-featurewhereXXXis the issue number. - Do the work -- discuss any questions on the Issues as needed (we try to be pretty good about answering questions!)
- (If you created a new model, run
bundle exec annotatefrom the root of the app) - Create tests to provide proof that your work fixes the Issue (if you need help with this, please reach out!)
- Commit locally, using descriptive commit messages that acknowledge, to the best of your ability, the parts of the app that are affected by the commit.
- Run the tests and make sure they run green; if they don't, fix whatever broke so that the tests pass
- Final commit if any tests had to be fixed
- Push up the branch
- Create a Pull Request - Please indicate which issue it addresses in your pull-request title.
Squashing your own commits before pushing is totally fine. Please don't squash other people's commits. (Everyone who contributes here deserves credit for their work! :) ). Also, consider the balance of "polluting the git log with commit messages" vs. "providing useful detail about the history of changes in the git log". If you have several (or many) smaller commits that all serve one purpose, and these can be squashed into a single commit whose message describes the thing, you're encouraged to squash.
There's no hard and fast rule here about this (for now), just use your best judgement.
At that point, someone will work with you on doing a code review (typically pretty minor unless it's a very significant PR). If TravisCI gives π to the PR merging, we can then merge your code in; if your feature branch was in this main repository, the branch will be deleted after the PR is merged.
Sometimes we want to get a PR up there and going so that other people can review it or provide feedback, but maybe it's incomplete. This is OK, but if you do it, please tag your PR with in-progress label so that we know not to review / merge it.
Users that are frequent contributors and are involved in discussion (join the slack channel! :)) may be given direct Contributor access to the Repo so they can submit Pull Requests directly, instead of Forking first.
Try to keep your PRs limited to one particular issue and don't make changes that are out of scope for that issue. If you notice something that needs attention but is out-of-scope, please create a new issue.
Run all the tests with:
bundle exec rspec
Run a single test with:
bundle exec rspec {path_to_test_name}_spec.rb
This app uses RSpec, Capybara, and FactoryBot for testing. Make sure the tests run clean & green before submitting a Pull Request. If you are inexperienced in writing tests or get stuck on one, please reach out so one of us can help you. :)
The one situation where you probably don't need to write new tests is when simple re-stylings are done (ie. the page may look slightly different but the Test suite is unaffected by those changes).
Tip: If you need to skip a failing test, place pending("Reason you are skipping the test") into the it block rather than skipping with xit. This will allow rspec to deliver the error message without causing the test suite to fail.
example:
it "works!" do
pending("Need to implement this")
expect(my_code).to be_valid
endIf you need to see a browser/system spec run in the browser, you can use the following env variable:
NOT_HEADLESS=true bundle exec rspec
We've added magic_test which makes creating browser specs much easier. It does this by giving you the ability to record actions on the browser running the specs and easily paste them into the spec.
For example you can do this by adding magic_test within your system spec:
it "does some browser stuff" do
magic_test
endand run the spec using this command:
MAGIC_TEST=1 NOT_HEADLESS=true bundle exec rspec <path_to_spec>
See videos of it in action here
The human-essentials & partner application should be deployed ideally on a weekly or bi-weekly schedule. However, this depends on the amount of updates that we have merged into main. Assuming there is updates that we want to ship into deploy, this is the process we take to getting updates from our main branch deployed to our servers.
- You will need SSH access to our servers. Access is usually only given to core maintainers of the human-essentials & partner projects.
You can run delayed jobs locally by running the rake jobs:work command. You'll need to do this to see any e-mails (they should
pop up in your browser). Alternatively, you can run a specific delayed job by opening a Rails console and doing something like:
Delayed::Job.last.invoke_jobYou can replace the last query with any other query (e.g. Delayed::Job.find(123)).
Sometimes we want to get a PR up there and going so that other people can review it or provide feedback, but maybe it's incomplete. This is OK, but if you do it, please tag your PR with in-progress label so that we know not to review / merge it.
- The generated
schema.rbfile may include or omitid: :serialforcreate table, andnull: falsefort.datetime. According to Aaron, this can safely be ignored, and it is probably best to commit the schema.rb only if you have committed anything that would change the DB schema (i.e. a migration). - If you have trouble relating to SSL libraries installing Ruby using
rvmorrbenvon a Mac, you may need to add a command line option to specify the location of the SSL libraries. Assuming you are usingbrew, this will probably result in a command looking something like:
rvm install 2.6.4 --with-openssl-dir='brew --prefix openssl'Users that are frequent contributors and are involved in discussion (join the slack channel! :)) may be given direct Contributor access to the Repo so they can submit Pull Requests directly, instead of Forking first.
The human-essentials application should be deployed ideally on a weekly or bi-weekly schedule. However, this depends on the amount of updates that we have merged into main. Assuming there is updates that we want to ship into deploy, this is the process we take to getting updates from our main branch deployed to our servers.
-
You will need SSH access to our servers
- Access is usually only given to core maintainers of the human-essentials project
-
Login credentials to our Mailchimp account
- You'll need to push up a tag with the proper semantic versioning. Check out the releases to get the correct semantic versioning tag to use. For example, if the last release was
2.1.0and the update is a hotfix then the next one should be2.1.1
git tag x.y.z
git push --tags- Publish a release associated to that tag pushed up in the previous step. You can do that here. Make sure to include details on what the release's updates achieves (we use this to notify our stakeholders on updates via email).
We will now want to inform the stakeholders that we've recently made a deployment and include details on what was updated. This is achieved by accessing all the user records and sending out a email via our Mailchimp account.
- Fetch all the emails of our users by accessing our human essentials production database
cap production rails:console
emails = User.all.pluck(:email)
puts "Email Address\n" + emails.join("\n") # Copy this output-
Use the list of the emails copied from the output from the previous step to send a update audience via Mailchimp. Go to Audience > Manage Audience > Import Contacts and select "Copy and paste" option. Then paste the output of step 1. Complete the subsequent steps.
-
Draft the email and send it with updates.
Thanks to Rachel (from PDX Diaperbank) for all of her insight, support, and assistance with this application, and Sarah ( http://www.sarahkasiske.com/ ) for her wonderful design and CSS work at Ruby For Good '17!
Thanks goes to these wonderful people (emoji key):
This project follows the all-contributors specification. Contributions of any kind welcome!