Skip to content

dockleryxk/PSO

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

24 Commits
 
 
 
 
 
 
 
 

Repository files navigation

PSO

Overview

From Wikipedia:

In computer science, particle swarm optimization (PSO) is a computational method 
that optimizes a problem by iteratively trying to improve a candidate solution 
with regard to a given measure of quality. PSO optimizes a problem by having a 
population of candidate solutions, here dubbed particles, and moving these 
particles around in the search-space according to simple mathematical formulae 
over the particle's position and velocity. Each particle's movement is influenced 
by its local best known position but, is also guided toward the best known 
positions in the search-space, which are updated as better positions are found 
by other particles. This is expected to move the swarm toward the best solutions.

Parameters

The following is some guidance for the ranges of the parameters.

Number of Particles

A typical range is 20-40. For many problems, as few as 10 particles may be enough. For larger or more difficult problems, 100, 200, or more particles might be more appropriate.

Inertia

Generally the range is 0-1, typically very close to 1.

Cognition, Social, and Local parameters

Usually they are nearly equal and typically around 2, but they can range from 0-4. If the local parameter is set to 0, then the neighbors take no part in the optimization.

World Width and World Height

The range in the x and y directions, respectively. A good range is -50 to 50 in both directions. In that case, both the world width and height would be 100.

Maximum Velocity

Limits how much a particle can move for a given iteration. Typical values to try are 1, 2, and 10. Some implementations define maximum velocity as the world width or height.

Usage

swarm.py [-v] [test] numParticles inertia cognition socialRate localRate worldWidth worldHeight maxVelocity maxEpochs k fname

  • -v invokes the verbose option, which will print the error as the algorithm runs in the format [error_x, error_y]
  • whether or not the verbose option is used, information about each particle state at the final epoch is printed. The data printed first is the globally most fit particle in the format [Q value, x position, y position]. Immediately below is the index of that particle in the array. Next, info about each particle is printed in blocks as follows:
    • i: index in particle array
    • x: x position
    • y: y position
    • v_x: x velocity
    • v_y: y velocity
    • b: personal best Q value
  • using the test argument will automatically provide the below parameters, -v works
    • Number of Particles = 20
    • Inertia = 0.95
    • Cognition = 2
    • Social Rate = 2
    • Local Rate = 2
    • World Width = 100
    • World Height = 100
    • Max Velocity = 2
    • k = 0 (no neighbors taken into account)
    • Max Epochs = 10,000
    • no CSV file will be generated, which is normally specified by fname

Note: do not include an extension for fname, .csv is appended automatically

Additional Info

The problems solved in this particular program are as show:

Problems

These are hard coded in, and only Problem 1 remains uncommented, however anyone could write their own problem and make it into a Q function.

To give a better idea of what these particles are doing, here are two gifs of the particles coverging at the global max (20, 7) and the local max (-20, -7) over time, respectively.

Global Max Local Max

Further, here is a line plot of the average error of the particles over time. This run was using the test parameters for problem 1:

error over time

It is observed that the particles quickly near the solution, but "bounce around" until they have achieved an error of less that 0.01 each. Riveting.

Contact

Richard Jeffords

rajeffords@gmail.com

About

Particle Swarm Optimization

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages