Skip to content

4) Irrigation Settings

Devin R. Olsen edited this page Jul 27, 2017 · 2 revisions

Found at the root menus; irrigation settings allows you to configure the follow OS settings:

  • Reservoir Volume
  • Drain Length
  • Flow Meter Calibration
  • Top Off Concentrate
  • Top Off Amount

Reservoir Volume

Allows you to configure the set amount of water your reservoir will be using (fix amount, see automated reservoirs) in order for the OS to do all proper calculations of programmed ml amounts per regimen dosing.

Drain Length

Allows you to configure how long the irrigation "Out" drain line should be open for when doing plant water flushing.

Flow Meter Calibration

Allows you to calibrate each of the two required flow meters for your system depending on your sizes of water lines going to and coming from your reservoir. You will find the specs for ml per second on the back of your flow meters and very depending on size and manufacturer.

Top Off Concentrate

Allows you to configure the concentration level of regimen's configured dosing ml for top off water (water fed to plants during full feedings).

Clone this wiki locally