hotspot

shell script for setup and management of hotspot (hostapd) functions on rpi platform

functions:

• try
• start
• stop
• restart
• enable
• disable
• retry
• status
• setup
• setchan [channel]
• syslog [lines]
• ipt [wipe]
• ovpn [start|stop|refresh]
• tor [start|stop]
• version
• wlan [start|stop]
• modpar <dnsmasq|hostapd|self> <name> [value]
• automatic start at boot process by systemd

will use onboard wlan adaptor for hotspot functionality and
the on board ethernet port or an optional external usb wlan adaptor (e.g. EW-7811Un Realtek RTL8188CUS)
for internet access.

best wlan channel for hotspot functionality will be determined automatically by least used frequency spectrum.

create .ovpn config files for free openvpn server taken from https://www.vpngate.net

actions will be logged to /tmp/hotspot and syslog
pls. see examples in troubleshooting section.

for full installation and setup sequence, pls. see installation and setup section at the bottom of this file

installation

rpi login as root required

root:# cd /usr/local/sbin
root:# rm hotspot                  # just remove old hotspot script
root:# wget https://raw.githubusercontent.com/rudiratlos/hotspot/master/hotspot
root:# chmod +x hotspot
root:# apt-get update
root:# apt-get upgrade

setup

will install all required packages (e.g. iw tor hostapd dnsmasq),
setting parameters and create config files:

• /etc/sysctl.conf (activate line net.ipv4.ip_forward=1)
• /etc/rc.local
• /etc/issues
• /etc/dhcpcd.conf
• /etc/dnsmasq.conf
• /etc/default/hostapd
• /etc/hostapd/hostapd.conf
• /etc/tor/torrc

Existing files will be backed up with a date extension (YYYYMMDDhhmmss).

hotspot setup
hotspot try

above command sequence will create a hotspot with following default parameter:

ssid: <HOSTNAME>wlan-<MAC3ByteAdr> (e.g. RPIwlan-abcdef)
pwd: hallohallo
country: DE

next commands will create all config files and adjusts parameter to your environment.

hotspot setup
hotspot modpar hostapd ssid myHotspotID 
hotspot modpar hostapd wpa_passphrase myHotspotPassword
hotspot modpar hostapd country_code SE
hotspot modpar crda REGDOMAIN SE

hotspot try

tor opvn install disable

before executing hotspot setup command,
you can disable the installation of tor and/or ovpn package by modifying the aptaddinstlist variable.

hotspot modpar self aptaddinstlist "tor"           # install tor only
hotspot modpar self aptaddinstlist "openvpn"       # install openvpn only 
hotspot modpar self aptaddinstlist "tor openvpn"   # install both (default)
hotspot modpar self aptaddinstlist ""              # do not install tor and openvpn

enable

enable hotspot service

hotspot will be started by systemd service
control file: /lib/systemd/system/hotspot.service
the service will be started at boot stage where
network interfaces are available.
If autostart variable is set to "yes", hotspot will be tried to start. \

Older versions, hotspot was started by rc.local.

hotspot enable

disable

disable hotspot service

hotspot disable

start

start all hotspot associated functions:

• terminate connection on wlan0
• create device ap0 and assign IP addr
• start dnsmasq
• start hostapd

hotspot start

try

will start hotspot if following condition is met:

• wlan0 or eth0 not connected
• wlan0 and eth0 IP addresses are on same IP subnet (wlan0 connection will be stopped)

hotspot try

stop [nowlan]

stop hotspot functions:

• stop hostapd
• stop dnsmasq
• optional: restart wlan

hotspot stop

restart

executes following hotspot sequence:

• hotspot stop nowlan
• sleep some seconds (settling time)
• hotspot start

hotspot restart

retry

executes following hotspot sequence:

• hotspot stop nowlan
• sleep some seconds (settling time)
• hotspot try

hotspot retry

modpar

change parameter value in config file

format: hotspot modpar <dnsmasq|hostapd|self> <name> [value]

file selector:
dnsmasq                 /etc/dnsmasq.conf
hostapd                 /etc/hostapd/hostapd.conf
self                    /usr/local/sbin/hotspot

name			parameter name
value			parameter value

examples:

hotspot modpar hostapd ssid myHotspotID      # set parameter ssid=myHotspotID
hotspot modpar hostapd country_code DE       # set parameter country_code=DE

special hostapd parameter

autostart

During boot process systemd service hotspot.service will look for
file content autostart="yes" in /usr/local/sbin/hotspot and will execute hotspot try command.\

V0.960: This is not needed anymore, use hotspot enable/disable command.

hotspot modpar self autostart yes            # enable  autostart (default)
hotspot modpar self autostart no             # disable autostart

ovpnstart

start openvpn automatically

hotspot modpar self ovpnstart yes           # enable  ovpnstart
hotspot modpar self ovpnstart no            # disable ovpnstart (default)

adjust specific openvpn parameter

hotspot modpar self ovpn_dev tun3           # change ovpn device for iptables

to work correctly, ovpn_dev has to be the same, that is defined in .ovpn config file (parameter dev).

torstart

start tor service automatically

hotspot modpar self torstart yes            # enable  torstart
hotspot modpar self torstart no             # disable torstart (default)

wipeiptables

hotspot script will look for file content wipeiptables="yes" at startup and will flush/wipe all rules before hotspot will set new rules.

hotspot modpar self wipeiptables yes        # reset all rules (default)
hotspot modpar self wipeiptables no         # no rules wipeing

openvpn (user specific)

copy your.ovpn and your.pwd file to /etc/ovpn/client/

cp your.ovpn /etc/ovpn/client/
cp your.pwd  /etc/ovpn/client/
hotspot modpar self ovpncfg your.ovpn
hotspot modpar self ovpnpwd your.pwd
hotspot modpar self ovpnrefreshbeforestart no
hotspot modpar self ovpnstart yes

if you do not have a your.pwd, set the parameter to an emtpy string

openvpn (vpngate)

start, stop openvpn or refresh .ovpn files from vpngate.net experimental
refresh will download the CSV list of free openvpn server and will create .ovpn files.
server from these countries will be used, defined by ovpnsel parameter: AT CH DE ES FR GB JP KR SC TW US out of these, the server with the highest score is defined in /etc/openvpn/client/vpngate_bestscore.ovpn and will be used as default openvpn server.

pls. see ovpnstart parameter for automatic starting openvpn and modifying parameter

hotspot ovpn start                          # start openvpn service
hotspot ovpn stop                           # stop  openvpn service (default)
hotpsot ovpn refresh                        # recreate .ovpn config files

tor

start or stop tor service experimental
pls. see torstart parameter for automatic starting tor service.

hotspot tor start                           # start tor service
hotspot tor stop                            # stop  tor service

syslog [lines]

show hotspot related syslog entries

hotspot syslog
hotspot syslog 5

version

show hotspot script version

hotspot version

installation and setup

rpi login as root required

root:# cd /usr/local/sbin
root:# rm hotspot                           # just remove old hotspot script
root:# wget https://raw.githubusercontent.com/rudiratlos/hotspot/master/hotspot
root:# chmod +x hotspot
root:# apt-get update
root:# apt-get upgrade                      # optional

root:# hotspot setup

root:# hotspot modpar hostapd ssid myHotspotID 
root:# hotspot modpar hostapd wpa_passphrase myHotspotPassword
root:# hotspot modpar hostapd country_code SE
root:# hotspot modpar crda REGDOMAIN SE
root:# hotspot modpar self autostart yes    # optional autostart enable

root:# reboot                               # if autostart enable or use hotspot try

troubleshooting

log entries will be sent to the file /tmp/hotspot.log and syslog utility

following commands will show you hotspot script activity

hotspot syslog
cat /tmp/hotspot.log
tail -500 /var/log/syslog | grep -a "hotspot:"
cat /var/log/syslog | grep -a "hotspot:"

these commands will show 5 log entries of involved SW packages caused by hotspot command sequence

hotspot syslog 5
tail -500 /var/log/syslog | grep -a -A 5 "hotspot:"
cat /var/log/syslog | grep -a -A 5 "hotspot:"