Skip to content
This repository has been archived by the owner on Apr 26, 2024. It is now read-only.

Installation

Jump to bottom
Hassan Ait Nacer edited this page Apr 17, 2024 · 33 revisions

Table of Contents

Requirements

Dependencies

  • linux or bsd or macOS (iTerm2) or windows (no terminal support)
  • python 3.5+
  • imagemagick
    • Colorscheme generation.
  • pidof (procps)
    • Detection of running programs.
  • xfce, gnome, cinnamon, mate
    • Desktop wallpaper setting.
  • feh, nitrogen, bgs, hsetroot, habak, display
    • Universal wallpaper setting.

Terminal Emulator

To use wal your terminal emulator must support a special type of escape sequence. The command below can be used as a test to see if wal will work with your setup.

Run the command below, does the background color of your terminal become red?

printf "%b" "\033]11;#ff0000\007"

Note: Before the test, clean your current memory's Xresources with xrdb -remove *. The .Xresources file overrides the printf "%b" "\033]11;#ff0000\007" command.

If your terminal's background color is now red, your terminal should work with wal.

Terminals that DON'T work with wal.

Installation

Pip install

System-wide install (sudo)

sudo pip3 install pywal

User install (No sudo)

pip3 install --user pywal

# Add local 'pip' to PATH:
# (In your .bashrc, .zshrc etc)
export PATH="${PATH}:${HOME}/.local/bin/"

Manual/Git install

git clone https://github.com/dylanaraps/pywal
cd pywal
pip3 install --user .

# Add local 'pip' to PATH:
# (In your .bashrc, .zshrc etc)
export PATH="${PATH}:${HOME}/.local/bin/"

OS/Distro Packages

Arch Linux

pywal is available in the Arch Linux repos as python-pywal.

Nixpkgs/NixOS

pywal is availalble in Nixpkgs as pywal

Void Linux

pywal is availalble in the main Void Linux repo as pywal

Source Mage GNU/Linux

pywal is available in test grimoire as pywal

MacOS

pywal should be installed on MacOS with the following command

# Downloads the master release, the pip release is not functional out-of-the box for MacOS
pip install --user https://github.com/dylanaraps/pywal/archive/master.zip

#Prints your pywal installation path
pip show pywal | grep "Location"

Then, paste the path from above in place of the word replace below into a line of your .bashrc/.zshrc/other:

export PATH="${PATH}:REPLACE"

Backends

If you want to enable alternative backends, install the supported backend via pip. To install colorz for example:

pip3 install --user colorz
Clone this wiki locally