Board config
Board config file is named board.cfg is stored on cfg partition. During flashing there is option BOARD_CONFIG_DEPLOY for deploy config and option BOARD_CONFIG say which config will be deployed. This is required only first time, or after changing configuratrion. All board configs are stored in cfg directory.
| Key | Description | Representation |
|---|---|---|
| DEVICE_NAME | Name of the device | char[32] |
| LED_CHARGING | Has charging led | bool |
| LED_CHARGING_GPIO | Charging led gpio | uint32 |
| LED_ERROR | Has error led | bool |
| LED_ERROR_GPIO | Error led gpio | uint32 |
| LED_WIFI | Has WiFi connection led | bool |
| LED_WIFI_GPIO | WiFi connection led gpio | uint32 |
| BUTTION_WIFI_GPIO | WiFi button gpio | uint32 |
| PILOT_PWM_GPIO | CP pwm generator gpio | uint32 |
| PILOT_ADC_CHANNEL | CP sensing adc channel | uint32 |
| PILOT_DOWN_THRESHOLD_12 | A state high voltage down threshold in mV | uint16 |
| PILOT_DOWN_THRESHOLD_9 | B state high voltage down threshold in mV | uint16 |
| PILOT_DOWN_THRESHOLD_6 | C state high voltage down threshold in mV | uint16 |
| PILOT_DOWN_THRESHOLD_3 | D state high voltage down threshold in mV | uint16 |
| PILOT_DOWN_THRESHOLD_N12 | B,C,D state low voltage threshold in mV | uint16 |
| PROXIMITY | Has PP detection | bool |
| PROXIMITY_ADC_CHANNEL | PP sensing adc channel | uint32 |
| PROXIMITY_DOWN_THRESHOLD_13 | Cable 13A down threshold | uint16 |
| PROXIMITY_DOWN_THRESHOLD_20 | Cable 20A down threshold | uint16 |
| PROXIMITY_DOWN_THRESHOLD_32 | Cable 32A down threshold | uint16 |
| AC_RELAY_GPIO | AC relay gpio for controlling mains contactor | uint32 |
| SOCKET_LOCK | Has socket lock | bool |
| SOCKET_LOCK_A_GPIO | uint32 | |
| SOCKET_LOCK_B_GPIO | uint32 | |
| SOCKET_LOCK_DETECTION_GPIO | uint32 | |
| SOCKET_LOCK_DETECTION_DELAY | uint16 | |
| SOCKET_LOCK_MIN_BREAK_TIME | uint16 | |
| RCM | Has residual current monitor | bool |
| RCM_GPIO | Residual current monitor gpio | uint32 |
| RCM_TEST_GPIO | Resudal current monitor test gpio | uint32 |
| ENERGY_METER | Energy meter | enum(none, cur, cur_vlt) |
| ENERGY_METER_THREE_PHASES | bool | |
| ENERGY_METER_L1_CUR_ADC_CHANNEL | uint32 | |
| ENERGY_METER_L2_CUR_ADC_CHANNEL | uint32 | |
| ENERGY_METER_L3_CUR_ADC_CHANNEL | uint32 | |
| ENERGY_METER_CUR_SCALE | float | |
| ENERGY_METER_L1_VLT_ADC_CHANNEL | uint32 | |
| ENERGY_METER_L2_VLT_ADC_CHANNEL | uint32 | |
| ENERGY_METER_L3_VLT_ADC_CHANNEL | uint32 | |
| ENERGY_METER_VLT_SCALE | float | |
| AUX_IN_1 | Has digital input 1 | bool |
| AUX_IN_1_NAME | Digital input 1 name | char[8] |
| AUX_IN_1_GPIO | Digital input 1 gpio | uint32 |
| AUX_IN_2 | Has digital input 2 | bool |
| AUX_IN_2_NAME | Digital input 2 name | char[8] |
| AUX_IN_2_GPIO | Digital input 2 gpio | uint32 |
| AUX_IN_3 | Has digital input 3 | bool |
| AUX_IN_3_NAME | Digital input 3 name | char[8] |
| AUX_IN_3_GPIO | Digital input 3 gpio | uint32 |
| AUX_IN_4 | Has digital input 4 | bool |
| AUX_IN_4_NAME | Digital input 4 name | char[8] |
| AUX_IN_4_GPIO | Digital input 4 gpio | uint32 |
| AUX_OUT_1 | Has digital output 1 | bool |
| AUX_OUT_1_NAME | Digital output 1 name | char[8] |
| AUX_OUT_1_GPIO | Digital output 1 gpio | uint32 |
| AUX_OUT_2 | Has digital output 2 | bool |
| AUX_OUT_2_NAME | Digital output 2 name | char[8] |
| AUX_OUT_2_GPIO | Digital output 2 gpio | uint32 |
| AUX_OUT_3 | Has digital output 3 | bool |
| AUX_OUT_3_NAME | Digital output 3 name | char[8] |
| AUX_OUT_3_GPIO | Digital output 3 gpio | uint32 |
| AUX_OUT_4 | Has digital output 4 | bool |
| AUX_OUT_4_NAME | Digital output 4 name | char[8] |
| AUX_OUT_4_GPIO | Digital output 4 gpio | uint32 |
| AUX_AIN_1 | Has analog input 1 | bool |
| AUX_AIN_1_NAME | Analog input 1 name | bool |
| AUX_AIN_1_ADC_CHANNEL | Analog input 1 adc channel | uint32 |
| AUX_AIN_2 | Has analog input 2 | bool |
| AUX_AIN_2_NAME | Analog input 2 name | bool |
| AUX_AIN_2_ADC_CHANNEL | Analog input 2 adc channel | uint32 |
| SERIAL_1 | Type of serial | enum(none, uart, rs485) |
| SERIAL_1_NAME | Name of serial | char[16] |
| SERIAL_1_RXD_GPIO | Serial rx gpio | uint32 |
| SERIAL_1_TXD_GPIO | Serial tx gpio | uint32 |
| SERIAL_1_RTS_GPIO | Serial rts gpio | uint32 |
| SERIAL_2 | Type of serial | enum(none, uart, rs485) |
| SERIAL_2_NAME | Name of serial | char[16] |
| SERIAL_2_RXD_GPIO | Serial rx gpio | uint32 |
| SERIAL_2_TXD_GPIO | Serial tx gpio | uint32 |
| SERIAL_2_RTS_GPIO | Serial rts gpio | uint32 |
| SERIAL_3 * | Type of serial | enum(none, uart, rs485) |
| SERIAL_3_NAME * | Name of serial | char[16] |
| SERIAL_3_RXD_GPIO * | Serial rx gpio | uint32 |
| SERIAL_3_TXD_GPIO * | Serial tx gpio | uint32 |
| SERIAL_3_RTS_GPIO * | Serial rts gpio | uint32 |
| ONEWIRE | Has onewire bus | bool |
Note Serial 3 is available only on MCU that have more than two uarts.