P3Steel Probing fix

effgarces · Aug 13, 2020 · 218234a · 218234a
1 parent 128e24f
commit 218234a
Showing 1 changed file with 7 additions and 7 deletions.
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -633,9 +633,9 @@
 #define USE_XMIN_PLUG
 #define USE_YMIN_PLUG
 #define USE_ZMIN_PLUG
-//#define USE_XMAX_PLUG
+#define USE_XMAX_PLUG
 //#define USE_YMAX_PLUG
-//#define USE_ZMAX_PLUG
+#define USE_ZMAX_PLUG
 
 // Enable pullup for all endstops to prevent a floating state
 #define ENDSTOPPULLUPS
@@ -987,7 +987,7 @@
  *
  * Specify a Probe position as { X, Y, Z }
  */
-#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
+#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -0.4 }
 
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
@@ -1033,7 +1033,7 @@
 #define Z_CLEARANCE_MULTI_PROBE     5 // Z Clearance between multiple probes
 //#define Z_AFTER_PROBING           5 // Z position after probing is done
 
-#define Z_PROBE_LOW_POINT          -2 // Farthest distance below the trigger-point to go before stopping
+#define Z_PROBE_LOW_POINT          -5 // Farthest distance below the trigger-point to go before stopping
 
 // For M851 give a range for adjusting the Z probe offset
 #define Z_PROBE_OFFSET_RANGE_MIN -20
@@ -1112,7 +1112,7 @@
 #define Z_HOMING_HEIGHT  1      // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
                                   // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding.
 
-//#define Z_AFTER_HOMING  10      // (mm) Height to move to after homing Z
+#define Z_AFTER_HOMING  10      // (mm) Height to move to after homing Z
 
 // Direction of endstops when homing; 1=MAX, -1=MIN
 // :[-1,1]
@@ -1313,8 +1313,8 @@
 
   //#define MESH_EDIT_GFX_OVERLAY   // Display a graphics overlay while editing the mesh
 
-  #define MESH_INSET 1              // Set Mesh bounds as an inset region of the bed
-  #define GRID_MAX_POINTS_X 15      // Don't use more than 15 points per axis, implementation limited.
+  #define MESH_INSET 10              // Set Mesh bounds as an inset region of the bed
+  #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle