Merge remote-tracking branch 'upstream/bugfix-2.0.x' into X5SA-2E-Bug…

…fix-2.0.x

Marlin/src/gcode/config/M575.cpp

@@ -33,7 +33,21 @@
  *   B<baudrate> - Baud rate (bits per second)
  */
 void GcodeSuite::M575() {
-  const int32_t baud = parser.ulongval('B');
+  int32_t baud = parser.ulongval('B');
+  switch (baud) {
+    case   24:
+    case   96:
+    case  192:
+    case  384:
+    case  576:
+    case 1152: baud *= 100; break;
+    case  250:
+    case  500: baud *= 1000; break;
+    case   19: baud = 19200; break;
+    case   38: baud = 38400; break;
+    case   57: baud = 57600; break;
+    case  115: baud = 115200; break;
+  }
   switch (baud) {
     case 2400: case 9600: case 19200: case 38400: case 57600:
     case 115200: case 250000: case 500000: case 1000000: {

Marlin/src/gcode/gcode.cpp

@@ -896,7 +896,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
         case 422: M422(); break;                                  // M422: Set Z Stepper automatic alignment position using probe
       #endif
 
-      #if BOTH(HAS_SPI_FLASH, SDSUPPORT)
+      #if ALL(HAS_SPI_FLASH, SDSUPPORT, MARLIN_DEV_MODE)
         case 993: M993(); break;                                  // M993: Backup SPI Flash to SD
         case 994: M994(); break;                                  // M994: Load a Backup from SD to SPI Flash
       #endif

Marlin/src/inc/Version.h

@@ -42,7 +42,7 @@
  * version was tagged.
  */
 #ifndef STRING_DISTRIBUTION_DATE
-  #define STRING_DISTRIBUTION_DATE "2020-08-09"
+  #define STRING_DISTRIBUTION_DATE "2020-08-10"
 #endif
 
 /**

Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp

@@ -591,16 +591,17 @@ void ST7920_Lite_Status_Screen::draw_fan_speed(const uint8_t value) {
   write_byte('%');
 }
 
-void ST7920_Lite_Status_Screen::draw_print_time(const duration_t &elapsed) {
+void ST7920_Lite_Status_Screen::draw_print_time(const duration_t &elapsed, char suffix) {
   #if HOTENDS == 1
     set_ddram_address(DDRAM_LINE_3);
   #else
     set_ddram_address(DDRAM_LINE_3 + 5);
   #endif
   char str[7];
-  str[elapsed.toDigital(str)] = ' ';
+  int str_length = elapsed.toDigital(str);
+  str[str_length++] = suffix;
   begin_data();
-  write_str(str, 6);
+  write_str(str, str_length);
 }
 
 void ST7920_Lite_Status_Screen::draw_feedrate_percentage(const uint16_t percentage) {
@@ -714,6 +715,7 @@ void ST7920_Lite_Status_Screen::update_indicators(const bool forceUpdate) {
   if (forceUpdate || indicators_changed()) {
     const bool       blink             = ui.get_blink();
     const duration_t elapsed           = print_job_timer.duration();
+    duration_t       remaining         = TERN0(USE_M73_REMAINING_TIME, ui.get_remaining_time());
     const uint16_t   feedrate_perc     = feedrate_percentage;
     const int16_t    extruder_1_temp   = thermalManager.degHotend(0),
                      extruder_1_target = thermalManager.degTargetHotend(0);
@@ -738,7 +740,19 @@ void ST7920_Lite_Status_Screen::update_indicators(const bool forceUpdate) {
     #endif
 
     draw_fan_speed(thermalManager.fanPercent(spd));
-    draw_print_time(elapsed);
+
+    // Draw elapsed/remaining time
+    const bool show_remaining = ENABLED(SHOW_REMAINING_TIME) && (DISABLED(ROTATE_PROGRESS_DISPLAY) || blink);
+    if (show_remaining && !remaining.second()) {
+      const auto progress = ui.get_progress_percent();
+      if (progress)
+        remaining = elapsed.second() * (100 - progress) / progress;
+    }
+    if (show_remaining && remaining.second())
+      draw_print_time(remaining, 'R');
+    else
+      draw_print_time(elapsed);
+
     draw_feedrate_percentage(feedrate_perc);
 
     // Update the fan and bed animations

Marlin/src/lcd/dogm/status_screen_lite_ST7920.h

@@ -80,14 +80,14 @@ class ST7920_Lite_Status_Screen {
     static void draw_fan_icon(const bool whichIcon);
     static void draw_heat_icon(const bool whichIcon, const bool heating);
     static void draw_temps(uint8_t line, const int16_t temp, const int16_t target, bool showTarget, bool targetStateChange);
-    static void draw_extruder_1_temp(const int16_t temp, const int16_t target, bool forceUpdate = false);
-    static void draw_extruder_2_temp(const int16_t temp, const int16_t target, bool forceUpdate = false);
-    static void draw_bed_temp(const int16_t temp, const int16_t target, bool forceUpdate = false);
+    static void draw_extruder_1_temp(const int16_t temp, const int16_t target, bool forceUpdate=false);
+    static void draw_extruder_2_temp(const int16_t temp, const int16_t target, bool forceUpdate=false);
+    static void draw_bed_temp(const int16_t temp, const int16_t target, bool forceUpdate=false);
     static void draw_fan_speed(const uint8_t value);
-    static void draw_print_time(const duration_t &elapsed);
+    static void draw_print_time(const duration_t &elapsed, char suffix=' ');
     static void draw_feedrate_percentage(const uint16_t percentage);
     static void draw_status_message();
-    static void draw_position(const xyze_pos_t &pos, bool position_known = true);
+    static void draw_position(const xyze_pos_t &pos, bool position_known=true);
 
     static bool indicators_changed();
     static bool position_changed();

Marlin/src/module/planner.cpp

@@ -1281,7 +1281,7 @@ void Planner::recalculate() {
 void Planner::check_axes_activity() {
 
   #if ANY(DISABLE_X, DISABLE_Y, DISABLE_Z, DISABLE_E)
-    xyze_bool_t axis_active = { true, true, true, true };
+    xyze_bool_t axis_active = { false };
   #endif
 
   #if HAS_FAN
@@ -1316,10 +1316,10 @@ void Planner::check_axes_activity() {
     #if ANY(DISABLE_X, DISABLE_Y, DISABLE_Z, DISABLE_E)
       for (uint8_t b = block_buffer_tail; b != block_buffer_head; b = next_block_index(b)) {
         block_t *block = &block_buffer[b];
-        if (ENABLED(DISABLE_X) && block->steps[X_AXIS]) axis_active[X_AXIS] = true;
-        if (ENABLED(DISABLE_Y) && block->steps[Y_AXIS]) axis_active[Y_AXIS] = true;
-        if (ENABLED(DISABLE_Z) && block->steps[Z_AXIS]) axis_active[Z_AXIS] = true;
-        if (ENABLED(DISABLE_E) && block->steps[E_AXIS]) axis_active[E_AXIS] = true;
+        if (ENABLED(DISABLE_X) && block->steps.x) axis_active.x = true;
+        if (ENABLED(DISABLE_Y) && block->steps.y) axis_active.y = true;
+        if (ENABLED(DISABLE_Z) && block->steps.z) axis_active.z = true;
+        if (ENABLED(DISABLE_E) && block->steps.e) axis_active.e = true;
       }
     #endif
   }

Marlin/src/module/tool_change.cpp

@@ -1133,7 +1133,7 @@ void tool_change(const uint8_t new_tool, bool no_move/*=false*/) {
               if (toolchange_settings.enable_park) do_blocking_move_to_xy_z(destination, destination.z, MMM_TO_MMS(TOOLCHANGE_PARK_XY_FEEDRATE));
             #else
               do_blocking_move_to_xy(destination, planner.settings.max_feedrate_mm_s[X_AXIS]);
-              do_blocking_move_to_z(destination, planner.settings.max_feedrate_mm_s[Z_AXIS]);
+              do_blocking_move_to_z(destination.z, planner.settings.max_feedrate_mm_s[Z_AXIS]);
             #endif
 
           #endif

buildroot/bin/use_example_configs

@@ -1,18 +1,21 @@
 #!/usr/bin/env bash
 
 IFS=: read -r PART1 PART2 <<< "$@"
-[ -n "${PART2}" ] && { REPO="$PART1" ; RDIR="$PART2" ; } \
-                  || { REPO=bugfix-2.0.x   ; RDIR="$PART1" ; }
+[ -n "${PART2}" ] && { REPO="$PART1" ; RDIR="${PART2// /%20}" ; } \
+                  || { REPO=bugfix-2.0.x   ; RDIR="${PART1// /%20}" ; }
 EXAMPLES="https://raw.githubusercontent.com/MarlinFirmware/Configurations/$REPO/config/examples"
 
+which curl >/dev/null && TOOL='curl -L -s -S -f -o wgot'
+which wget >/dev/null && TOOL='wget -q -O wgot'
+
 restore_configs
 
 cd Marlin
 
-wget -q "$EXAMPLES/$RDIR/Configuration.h"     -O wgot && mv wgot Configuration.h
-wget -q "$EXAMPLES/$RDIR/Configuration_adv.h" -O wgot && mv wgot Configuration_adv.h
-wget -q "$EXAMPLES/$RDIR/_Bootscreen.h"       -O wgot && mv wgot _Bootscreen.h
-wget -q "$EXAMPLES/$RDIR/_Statusscreen.h"     -O wgot && mv wgot _Statusscreen.h
-rm -f wgot
+$TOOL "$EXAMPLES/$RDIR/Configuration.h"     >/dev/null 2>&1 && mv wgot Configuration.h
+$TOOL "$EXAMPLES/$RDIR/Configuration_adv.h" >/dev/null 2>&1 && mv wgot Configuration.h
+$TOOL "$EXAMPLES/$RDIR/_Bootscreen.h"       >/dev/null 2>&1 && mv wgot Configuration.h
+$TOOL "$EXAMPLES/$RDIR/_Statusscreen.h"     >/dev/null 2>&1 && mv wgot Configuration.h
 
+rm -f wgot
 cd - >/dev/null

buildroot/share/fonts/uxggenpages.sh

@@ -139,11 +139,14 @@ BEGIN {
 }
 EOF
 
+which awk  >/dev/null && AWK=awk
+which gawk >/dev/null && AWK=gawk
+
 grep -Hrn _UxGT . | grep '"' \
   | sed 's/_UxGT("/\n&/g;s/[^\n]*\n_UxGT("\([^"]*\)[^\n]*/\1 /g;s/.$//' \
   | ${EXEC_GENPAGES} \
   | sort -k 1n -k 2n | uniq \
-  | gawk -v EXEC_PREFIX=${DN_EXEC} -f "proc.awk" \
+  | "$AWK" -v EXEC_PREFIX=${DN_EXEC} -f "proc.awk" \
   | while read PAGE BEGIN END UTF8BEGIN UTF8END; do \
     if [ ! -f ${DN_DATA}/fontpage_${PAGE}_${BEGIN}_${END}.h ]; then \
       ${EXEC_BDF2U8G} -u ${PAGE} -b ${BEGIN} -e ${END} ${FN_FONT} fontpage_${PAGE}_${BEGIN}_${END} ${DN_DATA}/fontpage_${PAGE}_${BEGIN}_${END}.h > /dev/null 2>&1 ;

buildroot/share/git/ghtp

@@ -13,14 +13,17 @@ case "$1" in
   -[Hh]) TYPE=HTTPS ; MATCH="git@" ; FORMULA="$GH_SSH/$GH_HTTPS" ;;
   -[Ss]) TYPE=SSH ; MATCH="https:" ; FORMULA="$GH_HTTPS/$GH_SSH" ;;
   *)
-    echo "usage: `basename $0` -h | -s" 1>&2
+    echo "Usage: `basename $0` -h | -s" 1>&2
     echo -e " \e[0;92m-h\e[0m to switch to HTTPS" 1>&2
     echo -e " \e[0;92m-s\e[0m to switch to SSH" 1>&2
     exit 1
     ;;
 esac
 
-REMOTES=$(git remote -v | egrep "\t$MATCH" | gawk '{print $1 " " $2}' | sort -u | sed "s/$FORMULA/")
+which awk  >/dev/null && AWK=awk
+which gawk >/dev/null && AWK=gawk
+
+REMOTES=$(git remote -v | egrep "\t$MATCH" | "$AWK" '{print $1 " " $2}' | sort -u | sed  "s/$FORMULA/")
 
 if [[ -z $REMOTES ]]; then
   echo "Nothing to do." ; exit
@@ -29,5 +32,5 @@ fi
 echo "$REMOTES" | xargs -n2 git remote set-url
 
 echo -n "Remotes set to $TYPE: "
-echo "$REMOTES" | gawk '{printf "%s ", $1}'
+echo "$REMOTES" | "$AWK" '{printf "%s ", $1}'
 echo

buildroot/share/git/mfclean

@@ -6,6 +6,9 @@
 # Great way to clean up your branches after messing around a lot
 #
 
+which awk  >/dev/null && AWK=awk
+which gawk >/dev/null && AWK=gawk
+
 KEEP="RC|RCBugFix|dev|master|bugfix-1|bugfix-2"
 
 echo "Fetching latest upstream and origin..."
@@ -18,7 +21,7 @@ git branch --merged | egrep -v "^\*|$KEEP" | xargs -n 1 git branch -d
 echo
 
 echo "Pruning Remotely-deleted Branches..."
-git branch -vv | egrep -v "^\*|$KEEP" | grep ': gone]' | gawk '{print $1}' | xargs -n 1 git branch -D
+git branch -vv | egrep -v "^\*|$KEEP" | grep ': gone]' | "$AWK" '{print $1}' | xargs -n 1 git branch -D
 echo
 
 # List fork branches that don't match local branches