Undo provoke test failure #52

	name: VTK6 C++ CI

	on: [push, pull_request]

	jobs:
	build:
	runs-on: ubuntu-20.04
	steps:
	- uses: actions/checkout@v1
	- name: Install packages
	run: sudo apt-get update && sudo apt-get install -y libvtk6-dev cmake libproj-dev
	- name: Check installed versions
	run: cmake --version
	- name: Build VTK-Dicom Library
	run: git clone https://github.com/dgobbi/vtk-dicom.git && cd vtk-dicom && mkdir build && cd build && cmake .. && make
	- name: Configure Simple
	run: mkdir build && cd build && cmake -DBUILD_GUI=OFF -DUSE_VTK_DICOM=OFF -DTESTDICOM2MESH=ON -DTESTDICOM2MESHLIB=ON ..
	- name: Build D2M Simple
	run: cd build && make
	- name: Run Test Simple
	run: ./build/lib/runLibTests && ./build/dicom2mesh/runD2MTests
	- name: Run Smoke Test Dicom2Mesh
	run: \|
	if ./build/dicom2mesh/dicom2mesh -h \| grep -q "How to use dicom2Mesh:"; then
	echo "Smoke test passed: Application started successfully."
	else
	echo "Smoke test failed: Expected output not found."
	exit 1
	fi

	- name: Clean
	run: rm -rf build

	- name: Configure VTK_DICOM
	run: mkdir build && cd build && cmake -DBUILD_GUI=OFF -DTESTDICOM2MESH=ON -DTESTDICOM2MESHLIB=ON -DUSE_VTK_DICOM=ON ..
	- name: Build D2M VTK_DICOM
	run: cd build && make
	- name: Run Test VTK_DICOM
	run: ./build/lib/runLibTests && ./build/dicom2mesh/runD2MTests
	- name: Run Smoke Test VTK_DICOM Dicom2Mesh
	run: \|
	if ./build/dicom2mesh/dicom2mesh -h \| grep -q "How to use dicom2Mesh:"; then
	echo "Smoke test passed: Application started successfully."
	else
	echo "Smoke test failed: Expected output not found."
	exit 1
	fi

Provide feedback