Pointcloud

[] (http://travis-ci.org/pgpointcloud/pointcloud)

Pointcloud

A PostgreSQL extension for storing point cloud (LIDAR) data.

Mailing list: http://lists.osgeo.org/mailman/listinfo/pgpointcloud/

Build/Install

Requirements

PostgreSQL and PostgreSQL development packages must be installed (pg_config and server headers). For Red Hat and Ubuntu, the package names are usually "postgresql-dev" or "postgresql-devel"
LibXML2 development packages must be installed, usually "libxml2-dev" or "libxml2-devel".
CUnit packages must be installed, or source built and installed.
[Optional] GHT library may be installed for GHT compression support, built from source
[Optional] LAZPERF library may be installed for LAZ compression support, built from source

Tests can be disabled by passing WITH_TESTS=FALSE to cmake, e.g. cmake .. -DWITH_TESTS=FALSE. This removes the CUnit dependency.

Build

CMake

Make a build directory, and run cmake from there. Use ccmake to browse and set the options on your build.

mkdir build
cd build
cmake ../
make
sudo make install

Autotools

After generating the configure script with autogen, ./configure --help to get a complete listing of configuration options.

./autogen.sh
./configure
make
sudo make install

Activate

Create a new database: CREATE DATABASE mynewdb
Connect to that database.
Activate the pointcloud extension: CREATE EXTENSION pointcloud

Schemas

LIDAR sensors quickly produce millions of points with large numbers of variables measured on each point. The challenge for a point cloud database extension is efficiently storing this data while allowing high fidelity access to the many variables stored.

Much of the complexity in handling LIDAR comes from the need to deal with multiple variables per point. The variables captured by LIDAR sensors varies by sensor and capture process. Some data sets might contain only X/Y/Z values. Others will contain dozens of variables: X, Y, Z; intensity and return number; red, green, and blue values; return times; and many more. There is no consistency in how variables are stored: intensity might be stored in a 4-byte integer, or in a single byte; X/Y/Z might be doubles, or they might be scaled 4-byte integers.

PostgreSQL Pointcloud deals with all this variability by using a "schema document" to describe the contents of any particular LIDAR point. Each point contains a number of dimensions, and each dimension can be of any data type, with scaling and/or offsets applied to move between the actual value and the value stored in the database. The schema document format used by PostgreSQL Pointcloud is the same one used by the PDAL library.

Here is a simple 4-dimensional schema document you can insert into pointcloud_formats to work with the examples below:

INSERT INTO pointcloud_formats (pcid, srid, schema) VALUES (1, 4326, 
'<?xml version="1.0" encoding="UTF-8"?>
<pc:PointCloudSchema xmlns:pc="http://pointcloud.org/schemas/PC/1.1" 
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
  <pc:dimension>
    <pc:position>1</pc:position>
    <pc:size>4</pc:size>
    <pc:description>X coordinate as a long integer. You must use the 
                    scale and offset information of the header to 
                    determine the double value.</pc:description>
    <pc:name>X</pc:name>
    <pc:interpretation>int32_t</pc:interpretation>
    <pc:scale>0.01</pc:scale>
  </pc:dimension>
  <pc:dimension>
    <pc:position>2</pc:position>
    <pc:size>4</pc:size>
    <pc:description>Y coordinate as a long integer. You must use the 
                    scale and offset information of the header to 
                    determine the double value.</pc:description>
    <pc:name>Y</pc:name>
    <pc:interpretation>int32_t</pc:interpretation>
    <pc:scale>0.01</pc:scale>
  </pc:dimension>
  <pc:dimension>
    <pc:position>3</pc:position>
    <pc:size>4</pc:size>
    <pc:description>Z coordinate as a long integer. You must use the 
                    scale and offset information of the header to 
                    determine the double value.</pc:description>
    <pc:name>Z</pc:name>
    <pc:interpretation>int32_t</pc:interpretation>
    <pc:scale>0.01</pc:scale>
  </pc:dimension>
  <pc:dimension>
    <pc:position>4</pc:position>
    <pc:size>2</pc:size>
    <pc:description>The intensity value is the integer representation 
                    of the pulse return magnitude. This value is optional 
                    and system specific. However, it should always be 
                    included if available.</pc:description>
    <pc:name>Intensity</pc:name>
    <pc:interpretation>uint16_t</pc:interpretation>
    <pc:scale>1</pc:scale>
  </pc:dimension>
  <pc:metadata>
    <Metadata name="compression">dimensional</Metadata>
  </pc:metadata>
</pc:PointCloudSchema>');

Schema documents are stored in the pointcloud_formats table, along with a pcid or "pointcloud identifier". Rather than store the whole schema information with each database object, each object just has a pcid, which serves as a key to find the schema in pointcloud_formats. This is similar to the way the srid is resolved for spatial reference system support in PostGIS.

The central role of the schema document in interpreting the contents of a point cloud object means that care must be taken to ensure that the right pcid reference is being used in objects, and that it references a valid schema document in the pointcloud_formats table.

Point Cloud Objects

PcPoint

The basic point cloud type is a PcPoint. Every point has a (large?) number of dimensions, but at a minimum an X and Y coordinate that place it in space.

Points can be rendered in a human-readable JSON form using the PC_AsText(pcpoint) function. The "pcid" is the foreign key reference to the pointcloud_formats table, where the meaning of each dimension in the "pt" array of doubles is explained. The underlying storage of the data might not be double, but by the time it has been extracted, scaled and offset, it is representable as doubles.

{
    "pcid" : 1,
      "pt" : [0.01, 0.02, 0.03, 4]
}

PcPatch

The structure of database storage is such that storing billions of points as individual records in a table is not an efficient use of resources. Instead, we collect a group of PcPoint into a PcPatch. Each patch should hopefully contain points that are near together.

Instead of a table of billions of single PcPoint records, a collection of LIDAR data can be represented in the database as a much smaller collection (10s of millions) of PcPatch records.

Patches can be rendered into a human-readable JSON form using the PC_AsText(pcpatch) function. The "pcid" is the foreign key reference to the pointcloud_formats table.

{
    "pcid" : 1,
     "pts" : [
              [0.02, 0.03, 0.05, 6],
              [0.02, 0.03, 0.05, 8]
             ]
}

Tables

Usually you will only be creating tables for storing PcPatch objects, and using PcPoint objects as transitional objects for filtering, but it is possible to create tables of both types. PcPatch and PcPoint columns both require an argument that indicate the pcid that will be used to interpret the column.

-- This example requires the schema entry from the previous 
-- section to be loaded so that pcid==1 exists.

-- A table of points
CREATE TABLE points (
    id SERIAL PRIMARY KEY,
    pt PCPOINT(1)
);

-- A table of patches
CREATE TABLE patches (
    id SERIAL PRIMARY KEY,
    pa PCPATCH(1)
);

In addition to any tables you create, you will find two other system-provided point cloud tables,

the pointcloud_formats table that holds all the pcid entries and schema documents
the pointcloud_columns view, that displays all the columns in your database that contain point cloud objects

Now that you have created two tables, you'll see entries for them in the pointcloud_columns view:

SELECT * FROM pointcloud_columns;

 schema |    table    | column | pcid | srid |  type   
--------+-------------+--------+------+------+---------
 public | points      | pt     |    1 | 4326 | pcpoint
 public | patches     | pa     |    1 | 4326 | pcpatch

Functions

PC_MakePoint(pcid integer, vals float8[]) returns pcpoint

Given a valid pcid schema number and an array of doubles that matches the schema, construct a new pcpoint.
SELECT PC_MakePoint(1, ARRAY[-127, 45, 124.0, 4.0]);

010100000064CEFFFF94110000703000000400
Insert some test values into the points table.
INSERT INTO points (pt)
SELECT PC_MakePoint(1, ARRAY[x,y,z,intensity])
FROM (
  SELECT  
  -127+a/100.0 AS x, 
    45+a/100.0 AS y,
         1.0*a AS z,
          a/10 AS intensity
  FROM generate_series(1,100) AS a
) AS values;

PC_AsText(p pcpoint) returns text

Return a JSON version of the data in that point.
SELECT PC_AsText('010100000064CEFFFF94110000703000000400'::pcpoint);

{"pcid":1,"pt":[-127,45,124,4]}

PC_PCId(p pcpoint) returns integer (from 1.1.0)

Return the pcid schema number of this point.
SELECT PC_PCId('010100000064CEFFFF94110000703000000400'::pcpoint));

1     

PC_AsBinary(p pcpoint) returns bytea

Return the OGC "well-known binary" format for the point.

SELECT PC_AsBinary('010100000064CEFFFF94110000703000000400'::pcpoint);

\x01010000800000000000c05fc000000000008046400000000000005f40

PC_Get(pt pcpoint, dimname text) returns numeric

Return the numeric value of the named dimension. The dimension name must exist in the schema.
SELECT PC_Get('010100000064CEFFFF94110000703000000400'::pcpoint, 'Intensity');

4

PC_Get(pt pcpoint) returns float8[] (from 1.1.0)

Return values of all dimensions in an array.
SELECT PC_Get('010100000064CEFFFF94110000703000000400'::pcpoint);

{-127,45,124,4}

PC_Patch(pts pcpoint[]) returns pcpatch

Aggregate function that collects a result set of pcpoint values into a pcpatch.
INSERT INTO patches (pa)
SELECT PC_Patch(pt) FROM points GROUP BY id/10;

PC_NumPoints(p pcpatch) returns integer

Return the number of points in this patch.
SELECT PC_NumPoints(pa) FROM patches LIMIT 1;

9     

PC_PCId(p pcpatch) returns integer (from 1.1.0)

Return the pcid schema number of points in this patch.
SELECT PC_PCId(pa) FROM patches LIMIT 1;

1     

PC_Envelope(p pcpatch) returns bytea

Return the OGC "well-known binary" format for bounds of the patch. Useful for performing intersection tests with geometries.
SELECT PC_Envelope(pa) FROM patches LIMIT 1;

\x0103000000010000000500000090c2f5285cbf5fc0e17a
14ae4781464090c2f5285cbf5fc0ec51b81e858b46400ad7
a3703dba5fc0ec51b81e858b46400ad7a3703dba5fc0e17a
14ae4781464090c2f5285cbf5fc0e17a14ae47814640

PC_AsText(p pcpatch) returns text

Return a JSON version of the data in that patch.

SELECT PC_AsText(pa) FROM patches LIMIT 1;

{"pcid":1,"pts":[
 [-126.99,45.01,1,0],[-126.98,45.02,2,0],[-126.97,45.03,3,0],
 [-126.96,45.04,4,0],[-126.95,45.05,5,0],[-126.94,45.06,6,0],
 [-126.93,45.07,7,0],[-126.92,45.08,8,0],[-126.91,45.09,9,0]
]}

PC_Summary(p pcpatch) returns text (from 1.1.0)

Return a JSON formatted summary of the data in that point.

SELECT PC_Summary(pa) FROM patches LIMIT 1;

{"pcid":1, "npts":9, "srid":4326, "compr":"dimensional","dims":[{"pos":0,"name":"X","size":4,"type":"int32_t","compr":"sigbits","stats":{"min":-126.99,"max":-126.91,"avg":-126.95}},{"pos":1,"name":"Y","size":4,"type":"int32_t","compr":"sigbits","stats":{"min":45.01,"max":45.09,"avg":45.05}},{"pos":2,"name":"Z","size":4,"type":"int32_t","compr":"sigbits","stats":{"min":1,"max":9,"avg":5}},{"pos":3,"name":"Intensity","size":2,"type":"uint16_t","compr":"rle","stats":{"min":0,"max":0,"avg":0}}]}

PC_Uncompress(p pcpatch) returns pcpatch

Returns an uncompressed version of the patch (compression type 'none'). In order to return an uncompressed patch on the wire, this must be the outer function with return type pcpatch in your SQL query. All other functions that return pcpatch will compress output to the schema-specified compression before returning.
SELECT PC_Uncompress(pa) FROM patches 
   WHERE PC_NumPoints(pa) = 1;

01010000000000000001000000C8CEFFFFF8110000102700000A00 

PC_Union(p pcpatch[]) returns pcpatch

Aggregate function merges a result set of pcpatch entries into a single pcpatch.
-- Compare npoints(sum(patches)) to sum(npoints(patches))
SELECT PC_NumPoints(PC_Union(pa)) FROM patches;
SELECT Sum(PC_NumPoints(pa)) FROM patches;

100 

PC_Intersects(p1 pcpatch, p2 pcpatch) returns boolean

Returns true if the bounds of p1 intersect the bounds of p2.

-- Patch should intersect itself
SELECT PC_Intersects(
         '01010000000000000001000000C8CEFFFFF8110000102700000A00'::pcpatch,
         '01010000000000000001000000C8CEFFFFF8110000102700000A00'::pcpatch);

t

PC_Explode(p pcpatch) returns SetOf[pcpoint]

Set-returning function, converts patch into result set of one point record for each point in the patch.

SELECT PC_AsText(PC_Explode(pa)), id 
FROM patches WHERE id = 7;

              pc_astext               | id 
--------------------------------------+----
 {"pcid":1,"pt":[-126.5,45.5,50,5]}   |  7
 {"pcid":1,"pt":[-126.49,45.51,51,5]} |  7
 {"pcid":1,"pt":[-126.48,45.52,52,5]} |  7
 {"pcid":1,"pt":[-126.47,45.53,53,5]} |  7
 {"pcid":1,"pt":[-126.46,45.54,54,5]} |  7
 {"pcid":1,"pt":[-126.45,45.55,55,5]} |  7
 {"pcid":1,"pt":[-126.44,45.56,56,5]} |  7
 {"pcid":1,"pt":[-126.43,45.57,57,5]} |  7
 {"pcid":1,"pt":[-126.42,45.58,58,5]} |  7
 {"pcid":1,"pt":[-126.41,45.59,59,5]} |  7

PC_PatchAvg(p pcpatch, dimname text) returns numeric

Reads the values of the requested dimension for all points in the patch and returns the average of those values. Dimension name must exist in the schema.
SELECT PC_PatchAvg(pa, 'intensity') 
FROM patches WHERE id = 7;

5.0000000000000000

PC_PatchMax(p pcpatch, dimname text) returns numeric

Reads the values of the requested dimension for all points in the patch and returns the maximum of those values. Dimension name must exist in the schema.
SELECT PC_PatchMax(pa, 'x') 
FROM patches WHERE id = 7;

-126.41

PC_PatchMin(p pcpatch, dimname text) returns numeric

Reads the values of the requested dimension for all points in the patch and returns the minimum of those values. Dimension name must exist in the schema.
SELECT PC_PatchMin(pa, 'y') 
FROM patches WHERE id = 7;

45.5

PC_PatchAvg(p pcpatch,) returns pcpoint (from 1.1.0)

Returns a PcPoint with the average values of each dimension in the patch.
SELECT PC_AsText(PC_PatchAvg(pa))
FROM patches WHERE id = 7;

{"pcid":1,"pt":[-126.46,45.54,54.5,5]}

PC_PatchMax(p pcpatch) returns pcpoint (from 1.1.0)

Returns a PcPoint with the maximum values of each dimension in the patch.
SELECT PC_PatchMax(pa)
FROM patches WHERE id = 7;

{"pcid":1,"pt":[-126.41,45.59,59,5]}

PC_PatchMin(p pcpatch) returns pcpoint (from 1.1.0)

Returns a PcPoint with the minimum values of each dimension in the patch.
SELECT PC_PatchMin(pa)
FROM patches WHERE id = 7;

{"pcid":1,"pt":[-126.5,45.5,50,5]}

PC_FilterGreaterThan(p pcpatch, dimname text, float8 value) returns pcpatch

Returns a patch with only points whose values are greater than the supplied value for the requested dimension.
SELECT PC_AsText(PC_FilterGreaterThan(pa, 'y', 45.57)) 
FROM patches WHERE id = 7;

 {"pcid":1,"pts":[[-126.42,45.58,58,5],[-126.41,45.59,59,5]]}

PC_FilterLessThan(p pcpatch, dimname text, float8 value) returns pcpatch

Returns a patch with only points whose values are less than the supplied value for the requested dimension.

PC_FilterBetween(p pcpatch, dimname text, float8 value1, float8 value2) returns pcpatch

Returns a patch with only points whose values are between the supplied values for the requested dimension.

PC_FilterEquals(p pcpatch, dimname text, float8 value) returns pcpatch

Returns a patch with only points whose values are the same as the supplied values for the requested dimension.

PC_Compress(p pcpatch,global_compression_scheme text,compression_config text) returns pcpatch (from 1.1.0)

Compress a patch with a manually specified scheme. The compression_config semantic depends on the global compression scheme. Allowed global compression schemes are:

auto -- determined by pcid

ght -- no compression config supported

laz -- no compression config supported

dimensional configuration is a comma-separated list of per-dimension compressions from this list:

auto -- determined automatically, from values stats

zlib -- deflate compression

sigbits -- significant bits removal

rle -- run-length encoding

PC_PointN(p pcpatch, n int4) returns pcpoint

Returns the n-th point of the patch with 1-based indexing. Negative n counts point from the end.

PostGIS Integration

The pointcloud_postgis extension adds functions that allow you to use PostgreSQL Pointcloud with PostGIS, converting PcPoint and PcPatch to Geometry and doing spatial filtering on point cloud data. The pointcloud_postgis extension depends on both the postgis and pointcloud extensions, so they must be installed first:

CREATE EXTENSION postgis;
CREATE EXTENSION pointcloud;
CREATE EXTENSION pointcloud_postgis;

PC_Intersects(p pcpatch, g geometry) returns boolean
PC_Intersects(g geometry, p pcpatch) returns boolean

Returns true if the bounds of the patch intersect the geometry.
SELECT PC_Intersects('SRID=4326;POINT(-126.451 45.552)'::geometry, pa)
FROM patches WHERE id = 7;

t

PC_Intersection(pcpatch, geometry) returns pcpatch

Returns a PcPatch which only contains points that intersected the geometry.

SELECT PC_AsText(PC_Explode(PC_Intersection(
      pa, 
      'SRID=4326;POLYGON((-126.451 45.552, -126.42 47.55, -126.40 45.552, -126.451 45.552))'::geometry
)))
FROM patches WHERE id = 7;

             pc_astext               
--------------------------------------
 {"pcid":1,"pt":[-126.44,45.56,56,5]}
 {"pcid":1,"pt":[-126.43,45.57,57,5]}
 {"pcid":1,"pt":[-126.42,45.58,58,5]}
 {"pcid":1,"pt":[-126.41,45.59,59,5]}

Geometry(pcpoint) returns geometry
pcpoint::geometry returns geometry

Cast PcPoint to the PostGIS geometry equivalent, placing the x/y/z of the PcPoint into the x/y/z of the PostGIS point.
SELECT ST_AsText(PC_MakePoint(1, ARRAY[-127, 45, 124.0, 4.0])::geometry);

POINT Z (-127 45 124)

Compressions

One of the issues with LIDAR data is that there is a lot of it. To deal with data volumes, PostgreSQL Pointcloud allows schemas to declare their preferred compression method in the <pc:metadata> block of the schema document. In the example schema, we declared our compression as follows:

<pc:metadata>
  <Metadata name="compression">dimensional</Metadata>
</pc:metadata>

There are currently four supported compressions:

None, which stores points and patches as byte arrays using the type and formats described in the schema document.
Dimensional, which stores points the same as 'none' but stores patches as collections of dimensional data arrays, with an "appropriate" compression applied. Dimensional compression makes the most sense for smaller patch sizes, since small patches will tend to have more homogeneous dimensions.
GHT or "GeoHash Tree", which stores the points in a tree where each node stores the common values shared by all nodes below. For larger patch sizes, GHT should provide effective compression and performance for patch-wise operations. You must build Pointcloud with libght support to make use of the GHT compression.
LAZ or "LASZip". You must build Pointcloud with LAZPERF support to make use of the LAZ compression.

If no compression is declared in <pc:metadata>, then a compression of "none" is assumed.

Dimensional Compression

Dimensional compression first flips the patch representation from a list of N points containing M dimension values to a list of M dimensions each containing N values.

{"pcid":1,"pts":[
      [-126.99,45.01,1,0],[-126.98,45.02,2,0],[-126.97,45.03,3,0],
      [-126.96,45.04,4,0],[-126.95,45.05,5,0],[-126.94,45.06,6,0]
     ]}

Becomes, notionally:

{"pcid":1,"dims":[
      [-126.99,-126.98,-126.97,-126.96,-126.95,-126.94],
      [45.01,45.02,45.03,45.04,45.05,45.06],
      [1,2,3,4,5,6],
      [0,0,0,0,0,0]
     ]}

The potential benefit for compression is that each dimension has quite different distribution characteristics, and is amenable to different approaches. In this example, the fourth dimension (intensity) can be very highly compressed with run-length encoding (one run of six zeros). The first and second dimensions have relatively low variability relative to their magnitude and can be compressed by removing the repeated bits.

Dimensional compression currently uses only three compression schemes:

run-length encoding, for dimensions with low variability
common bits removal, for dimensions with variability in a narrow bit range
raw deflate compression using zlib, for dimensions that aren't amenable to the other schemes

For LIDAR data organized into patches of points that sample similar areas, the dimensional scheme compresses at between 3:1 and 5:1 efficiency.

Binary Formats

In order to preserve some compactness in dump files and network transmissions, the binary formats need to retain their native compression. All binary formats are hex-encoded before output.

The point and patch binary formats start with a common header, which provides:

endianness flag, to allow portability between architectures
pcid number, to look up the schema information in the pointcloud_formats table

The patch binary formats have additional standard header information:

the compression number, which indicates how to interpret the data
the number of points in the patch

Point Binary

byte:     endianness (1 = NDR, 0 = XDR)
uint32:   pcid (key to POINTCLOUD_SCHEMAS)
uchar[]:  pointdata (interpret relative to pcid)

Patch Binary

Patch Binary (Uncompressed)

byte:         endianness (1 = NDR, 0 = XDR)
uint32:       pcid (key to POINTCLOUD_SCHEMAS)
uint32:       0 = no compression
uint32:        npoints
pointdata[]:  interpret relative to pcid

Patch Binary (Dimensional)

byte:          endianness (1 = NDR, 0 = XDR)
uint32:        pcid (key to POINTCLOUD_SCHEMAS)
uint32:        2 = dimensional compression
uint32:        npoints
dimensions[]:  dimensionally compressed data for each dimension

Each compressed dimension starts with a byte, that gives the compression type, and then a uint32 that gives the size of the segment in bytes.

byte:           dimensional compression type (0-3)
uint32:         size of the compressed dimension in bytes
data[]:         the compressed dimensional values

There are four possible compression types used in dimensional compression:

no compression = 0,
run-length compression = 1,
significant bits removal = 2,
deflate = 3

No dimension compress

For dimensional compression 0 (no compression) the values just appear in order. The length of words in this dimension must be determined from the schema document.

word[]:

Run-length compress dimension

For run-length compression, the data stream consists of a set of pairs: a byte value indicating the length of the run, and a data value indicating the value that is repeated.

 byte:          number of times the word repeats
 word:          value of the word being repeated
 ....           repeated for the number of runs

The length of words in this dimension must be determined from the schema document.

Significant bits removal on dimension

Significant bits removal starts with two words. The first word just gives the number of bits that are "significant", that is the number of bits left after the common bits are removed from any given word. The second word is a bitmask of the common bits, with the final, variable bits zeroed out.

 word1:          number of variable bits in this dimension
 word2:          the bits that are shared by every word in this dimension
 data[]:         variable bits packed into a data buffer

Deflate dimension

Where simple compression schemes fail, general purpose compression is applied to the dimension using zlib. The data area is a raw zlib buffer suitable for passing directly to the inflate() function. The size of the input buffer is given in the common dimension header. The size of the output buffer can be derived from the patch metadata by multiplying the dimension word size by the number of points in the patch.

Patch Binary (GHT)

byte:          endianness (1 = NDR, 0 = XDR)
uint32:        pcid (key to POINTCLOUD_SCHEMAS)
uint32:        1 = GHT compression
uint32:        npoints
uint32:        GHT data size
uint8:         GHT data

GHT patches are much like dimensional patches, except their internal structure is more opaque. Use LibGHT to read the GHT data buffer out into a GHT tree in memory.

Patch Binary (LAZ)

byte:          endianness (1 = NDR, 0 = XDR)
uint32:        pcid (key to POINTCLOUD_SCHEMAS)
uint32:        3 = LAZ compression
uint32:        npoints
uint32:        LAZ data size
data[]:        LAZ data

LAZ patches are much like GHT patches. Use LAZPERF library to read the LAZ data buffer out into a LAZ buffer.

Loading Data

The examples above show how to form patches from array of doubles, and well-known binary. You can write your own loader, using the uncompressed WKB format, or more simply you can load existing LIDAR files using the PDAL processing and format conversion library.

From WKB

If you are writing your own loading system and want to write into Pointcloud types, create well-known binary inputs, in uncompressed format. If you schema indicates that your patch storage is compressed, Pointcloud will automatically compress your patch before storing it, so you can create patches in uncompressed WKB without worrying about the nuances of particular internal compression schemes.

The only issues to watch when creating WKB patches are: ensuring the data you write is sized according to the schema (use the specified dimension type); ensuring that the endianness of the data matches the declared endianness of the patch.

From PDAL

Build and Install PDAL

Support for PostgreSQL Pointcloud has been added to PDAL. It is in most recent builds, but if you want the latest version, you can build from source.

First, you will need to install the many, many dependencies of PDAL.

Read the compilation instructions: http://www.pdal.io/compilation/index.html
Read the dependency information: http://www.pdal.io/compilation/dependencies.html
Install the "proj4" library: https://trac.osgeo.org/proj/
Install the "geos" library: https://trac.osgeo.org/geos/
Install the "geotiff" library: http://trac.osgeo.org/geotiff/
Install the "gdal" library: http://gdal.org/
Install the "liblas" library: http://liblas.org/

Then, clone the PDAL repository:

Clone into a source directory: git clone https://github.com/PDAL/PDAL PDAL
Make a build directory: mkdir PDAL-build
Enter the build directory: cd PDAL-build
Run CMake to find dependencies: cmake ../PDAL
- Or, see https://github.com/PDAL/PDAL/blob/master/cmake/examples/pramsey-config.sh
If dependencies are not found, manually set them: ccmake ../PDAL
Once CMake has found all dependencies, run the build: make all
And install the artifacts: make install

If all the dependencies were found, you're ready to run a PDAL import into PostgreSQL Pointcloud!

Running `pdal pipeline`

PDAL includes a command linen program <http://www.pointcloud.org/apps.html>_ that allows both simple format translations and more complex "pipelines" of transformation. The pdal translate does simple format transformations. In order to load data into Pointcloud we use a "PDAL pipeline", by calling pdal pipeline. A pipeline combines a format reader, and format writer, with filters that can alter or group the points together.

PDAL pipelines are XML files, which nest together readers, filters, and writers into a processing chain that will be applied to the LIDAR data.

To execute a pipeline file, run it through the pdal pipeline command:

pdal pipeline --input pipelinefile.xml

Here is a simple example pipeline that reads a LAS file and writes into a PostgreSQL Pointcloud database.

<?xml version="1.0" encoding="utf-8"?>
<Pipeline version="1.0">
    <Writer type="writers.pgpointcloud">
        <Option name="connection">host='localhost' dbname='pc' user='lidar'</Option>
        <Option name="table">sthsm</Option>
        <Option name="srid">26910</Option>
        <Filter type="filters.chipper">
            <Option name="capacity">600</Option>
            <Filter type="filters.cache">
                <Reader type="readers.las">
                    <Option name="filename">/home/lidar/st-helens-small.las</Option>
                    <Option name="spatialreference">EPSG:26910</Option>
                </Reader>
            </Filter>
        </Filter>
    </Writer>
</Pipeline>

PostgreSQL Pointcloud storage of LIDAR works best when each "patch" of points consists of points that are close together, and when most patches do not overlap. In order to convert unordered data from a LIDAR file into patch-organized data in the database, we need to pass it through a filter to "chip" the data into compact patches. The "chipper" is one of the filters we need to apply to the data while loading.

Similarly, reading data from a PostgreSQL Pointcloud uses a Pointcloud reader and a file writer of some sort. This example reads from the database and writes to a CSV text file:

<?xml version="1.0" encoding="utf-8"?>
<Pipeline version="1.0">
    <Writer type="writers.text">
        <Option name="filename">/home/lidar/st-helens-small-out.txt</Option>
        <Option name="cache_block_size">32184</Option>
        <Option name="spatialreference">EPSG:26910</Option>
        <Reader type="readers.pgpointcloud">
            <Option name="connection">host='localhost' dbname='pc' user='lidar'</Option>
            <Option name="table">sthsm</Option>
            <Option name="column">pa</Option>
            <Option name="srid">26910</Option>
        </Reader>
    </Writer>
</Pipeline>

Note that we do not need to chip the data stream when reading from the database, as the writer does not care if the points are blocked into patches or not.

You can use the "where" option to restrict a read to just an envelope, allowing partial extracts from a table:

<?xml version="1.0" encoding="utf-8"?>
<Pipeline version="1.0">
    <Writer type="writers.las">
        <Option name="filename">st-helens-small-out.las</Option>
        <Option name="spatialreference">EPSG:26910</Option>
        <Reader type="readers.pgpointcloud">
            <Option name="connection">dbname='pc' user='pramsey'</Option>
            <Option name="table">sthsm</Option>
            <Option name="column">pa</Option>
            <Option name="srid">26910</Option>
            <Option name="where">PC_Intersects(pa, ST_MakeEnvelope(560037.36, 5114846.45, 562667.31, 5118943.24, 26910))</Option>
        </Reader>
    </Writer>
</Pipeline>

PDAL pgpointcloud Reader/Writer Options

The PDAL writers.pgpointcloud for PostgreSQL Pointcloud takes the following options:

connection: The PostgreSQL database connection string. E.g. host=localhost user=username password=pw db=dbname port=5432
table: The database table create to write the patches to.
schema: The schema to create the table in. [Optional]
column: The column name to use in the patch table. [Optional: "pa"]
compression: The patch compression format to use [Optional: "dimensional"]
overwrite: Replace any existing table [Optional: true]
srid: The spatial reference id to store data in [Optional: 4326]
pcid: An existing PCID to use for the point cloud schema [Optional]
pre_sql: Before the pipeline runs, read and execute this SQL file or command [Optional]
post_sql: After the pipeline runs, read and execute this SQL file or command [Optional]

The PDAL readers.pgpointcloud for PostgreSQL Pointcloud takes the following options:

connection: The PostgreSQL database connection string. E.g. host=localhost user=username password=pw db=dbname port=5432
table: The database table to read the patches from.
schema: The schema to read the table from. [Optional]
column: The column name in the patch table to read from. [Optional: "pa"]
where: SQL where clause to constrain the query [Optional]
spatialreference: Overrides the database declared SRID [Optional]

Name		Name	Last commit message	Last commit date
Latest commit History 360 Commits
cmake/modules		cmake/modules
lib		lib
macros		macros
pgsql		pgsql
pgsql_postgis		pgsql_postgis
tools		tools
util		util
.gitattributes		.gitattributes
.gitignore		.gitignore
.install-lazperf.sh		.install-lazperf.sh
.travis.yml		.travis.yml
CMakeLists.txt		CMakeLists.txt
COPYRIGHT		COPYRIGHT
Makefile		Makefile
NEWS		NEWS
README.md		README.md
Version.config		Version.config
autogen.sh		autogen.sh
config.mk.in		config.mk.in
configure.ac		configure.ac

elemoine/pointcloud

Folders and files

Latest commit

History

Repository files navigation

Pointcloud

Build/Install

Requirements

Build

CMake

Autotools

Activate

Schemas

Point Cloud Objects

PcPoint

PcPatch

Tables

Functions

PostGIS Integration

Compressions

Dimensional Compression

Binary Formats

Point Binary

Patch Binary

Patch Binary (Uncompressed)

Patch Binary (Dimensional)

No dimension compress

Run-length compress dimension

Significant bits removal on dimension

Deflate dimension

Patch Binary (GHT)

Patch Binary (LAZ)

Loading Data

From WKB

From PDAL

Build and Install PDAL

Running pdal pipeline

PDAL pgpointcloud Reader/Writer Options

About

Resources

Stars

Watchers

Forks

Releases

Packages 0

Languages

Running `pdal pipeline`

Packages