Skip to content

Simulation code for “A Primer on Near-Field Beamforming for Arrays and Reconfigurable Intelligent Surfaces,” by Emil Björnson, Özlem Tuğfe Demir, and Luca Sanguinetti, Asilomar Conference on Signals, Systems, and Computers, Virtual conference, October-November 2021.

Notifications You must be signed in to change notification settings

emilbjornson/nearfield-primer

Repository files navigation

Open in MATLAB Online

A Primer on Near-Field Beamforming for Arrays and Reconfigurable Intelligent Surfaces

This code package is related to the following scientific article:

Emil Björnson, Özlem Tuğfe Demir, and Luca Sanguinetti “A Primer on Near-Field Beamforming for Arrays and Reconfigurable Intelligent Surfaces,” Asilomar Conference on Signals, Systems, and Computers, Virtual conference, October-November 2021.

The package contains a simulation environment, based on Matlab, that reproduces some of the numerical results and figures in the article. We encourage you to also perform reproducible research!

Abstract of Article

Wireless communication systems have almost exclusively operated in the far-field of antennas and antenna arrays, which is conventionally characterized by having propagation distances beyond the Fraunhofer distance. This is natural since the Fraunhofer distance is normally only a few wavelengths. With the advent of active arrays and passive reconfigurable intelligent surfaces (RIS) that are physically large, it is plausible that the transmitter or receiver is located in between the Fraunhofer distance of the individual array/surface elements and the Fraunhofer distance of the entire array. An RIS then can be configured to reflect the incident waveform towards a point in the radiative near-field of the surface, resulting in a beam with finite depth, or as a conventional angular beam with infinity focus, which only results in amplification in the far-field. To understand when these different options are viable, an accurate characterization of the near-field behaviors is necessary. In this paper, we revisit the motivation and approximations behind the Fraunhofer distance and show that it is not the right metric for determining when near-field focusing is possible. We obtain the distance range where finite-depth beamforming is possible and the distance where the beamforming gain tapers off.

Content of Code Package

The article contains 6 simulation figures, numbered 3-5 and 7-9. Figures 3, 4, 5, 7, 8, and 9 are generated respectively by the Matlab scripts simulateFigure3.m, simulateFigure4.m, simulateFigure5.m, simulateFigure7.m, simulateFigure8.m, and simulateFigure9.m. You can run the code in MATLAB online without a license by clicking on the link above.

See each file for further documentation.

Acknowledgements

This work was supported by the FFL18-0277 grant from the SSF.

License and Referencing

This code package is licensed under the GPLv2 license. If you in any way use this code for research that results in publications, please cite our original article listed above.

About

Simulation code for “A Primer on Near-Field Beamforming for Arrays and Reconfigurable Intelligent Surfaces,” by Emil Björnson, Özlem Tuğfe Demir, and Luca Sanguinetti, Asilomar Conference on Signals, Systems, and Computers, Virtual conference, October-November 2021.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages