Emitter: Distributed Publish-Subscribe Platform

Emitter is a distributed, scalable and fault-tolerant publish-subscribe platform built with MQTT protocol and featuring message storage, security, monitoring and more:

• Publish/Subscribe using MQTT over TCP or Websockets.
• Resilient, highly available and partition tolerant (AP in CAP terms).
• Able to handle 3+ million of messages/sec on a single broker.
• Supports message storage with history and message-level expiry.
• Provides secure channel keys with permissions and can face the internet.
• Automatic TLS/SSL and encrypted inter-broker communication.
• Built-in monitoring with Prometheus, StatsD and more.
• Shared subscriptions, links and private links for channels.
• Easy deployment with Docker and Kubernetes of production-ready clusters.

Emitter can be used for online gaming and mobile apps by satisfying the requirements for low latency, binary messaging and high throughput. It can also be used for the real-time web application such as dashboards or visual analytics or chat systems. Moreover, Emitter is perfect for the internet of things and allows sensors to be controlled and data gathered and analyzed.

Tutorials & Demos

The following video tutorials demonstrate various features of Emitter in action.

How to Deploy

Quick Start

Run Server

The quick way to start an Emitter broker is by using docker run command as shown below.

Notice: You must use -e for docker environment.You could get it from your docker log.

docker run -d --name emitter -p 8080:8080 --restart=unless-stopped emitter/server

Alternatively, you can build and run from source.

# install git and go
# depending on your system, you may also need to install gcc and musl-dev
git clone https://github.com/emitter-io/emitter
cd emitter
go get -x .
go build -x .
./emitter

Get License

Both commands above start a new server and if no configuration or environment variables were supplied, it will print out a message(or you could find it in the docker log) similar to the message below once the server has started :

[service] unable to find a license, make sure 'license' value is set in the config file or EMITTER_LICENSE environment variable
[service] generated new license: uppD0PFIcNK6VY-7PTo7uWH8EobaOGgRAAAAAAAAAAI
[service] generated new secret key: JUoOxjoXLc4muSxXynOpTc60nWtwUI3o

This message shows that a new security configuration was generated, you can then re-run EMITTER_LICENSE set to the specified value. Alternatively, you can set "license" property in the emitter.conf configuration file.

Re-Run Command

References are available. Please replace your EMITTER_LICENSE to it.

docker run -d --name emitter -p 8080:8080 -e EMITTER_LICENSE=uppD0PFIcNK6VY-7PTo7uWH8EobaOGgRAAAAAAAAAAI --restart=unless-stopped emitter/server

Generate Key

Finally, open a browser and navigate to http://127.0.0.1:8080/keygen in order to generate your key. Now you can use the secret key generated to create channel keys, which allow you to secure individual channels and start using emitter.

Warning: If you use upon command, you secret is JUoOxjoXLc4muSxXynOpTc60nWtwUI3o. And it's not safe!!!

Usage Example

The code below shows a small example of usage of emitter with the Javascript SDK. As you can see, the API exposes straightforward methods such as publish and subscribe which can take binary payload and are secured through channel keys.

// connect to emitter service
var connection = emitter.connect({ host: '127.0.0.1' });

// once we're connected, subscribe to the 'chat' channel
emitter.on('connect', function(){
    emitter.subscribe({
        key: "<channel key>",
        channel: "chat"
    });
});

// publish a message to the chat channel
emitter.publish({
    key: "<channel key>",
    channel: "chat/my_name",
    message: "hello, emitter!"
});

Further documentation, demos and language/platform SDKs are available in the develop section of our website. Make sure to check out the getting started tutorial which explains the basic usage of emitter and MQTT.

Command line arguments

The Emitter broker accepts command line arguments, allowing you to specify a configuration file, usage is shown below.

-config string
   The configuration file to use for the broker. (default "emitter.conf")

-help
   Shows the help and usage instead of running the broker.

Configuration File

The configuration file (defaulting to emitter.conf) is the main way of configuring the broker. The configuration file is however, not the only way of configuring it as it allows a multi-level override through environment variables and/or hashicorp Vault.

The configuration file is in JSON format, but you can override any value by providing an environment variable which follows a particular format, for example if you'd like to provide a license through environment variable, simply define EMITTER_LICENSE environment variable, similarly, if you want to specify a certificate, define EMITTER_TLS_CERTIFICATE environment variable. Example of configuration file:

{
    "listen": ":8080",
    "license": "/*The license*/",
    "tls": {
        "listen": ":443",
        "host": "example.com"
    },
    "cluster": {
        "listen": ":4000",
        "seed": " 192.168.0.2:4000",
        "advertise": "public:4000"
    },
    "storage": {
        "provider": "inmemory"
    }
}

The structure of the configuration is described below:

Property	Env. Variable	Description
license	EMITTER_LICENSE	The license file to use for the broker. This contains the encryption key.
listen	EMITTER_LISTEN	The API address used for TCP & Websocket communication, in IP:PORT format (e.g: :8080).
limit.messageSize	EMITTER_LIMIT_MESSAGESIZE	Maximum message size. Default is 64KB.
tls.listen	EMITTER_TLS_LISTEN	The API address used for Secure TCP & Websocket communication, in IP:PORT format (e.g: :443).
tls.host	EMITTER_TLS_HOST	The hostname to whitelist for the certificate.
tls.email	EMITTER_TLS_EMAIL	The email account to use for autocert.
vault.address	EMITTER_VAULT_ADDRESS	The Hashicorp Vault address to use to further override configuration.
vault.app	EMITTER_VAULT_APP	The Hashicorp Vault application ID to use.
cluster.name	EMITTER_CLUSTER_NAME	The name of this node. This must be unique in the cluster. If this is not set, Emitter will set it to the external IP address of the running machine.
cluster.listen	EMITTER_CLUSTER_LISTEN	The IP address and port that is used to bind the inter-node communication network. This is used for the actual binding of the port.
cluster.advertise	EMITTER_CLUSTER_ADVERTISE	The address and port to advertise inter-node communication network. This is used for nat traversal.
cluster.seed	EMITTER_CLUSTER_SEED	The seed address (or a domain name) for cluster join.
cluster.passphrase	EMITTER_CLUSTER_PASSPHRASE	Passphrase is used to initialize the primary encryption key in a keyring. This key is used for encrypting all the gossip messages (message-level encryption).
storage.provider	EMITTER_STORAGE_PROVIDER	This property represents the publishers publish message storage mode. there are two kinds of can use, they are respectively inmemory and ssd, defaults to the former.
storage.config.dir	EMITTER_STORAGE_CONFIG	If the storage mode is ssd, this property indicates where the messages are stored (emitter server nodes are not allowed to use the same directory within the same machine)

Building and Testing

The server requires Golang 1.9 to be installed. Once you have this installed, simply go get this repository and run the following commands to download the package and run the server.

go get -u github.com/emitter-io/emitter && emitter

If you want to run the tests, simply run go test command as demonstrated below.

go test ./...

Deploying as Docker Container

Emitter is conveniently packaged as a docker container. To run the emitter service on a single server, use the command below. Once the server is started, it will generate a new security configuration, you can then re-run the same command with an additional environment variable -e EMITTER_LICENSE set to the provided value.

docker run -d -p 8080:8080 emitter/server

For the clustered (multi-server) mode, the container can be started using the simple docker run with 3 main parameters.

docker run -d -p 8080:8080 -p 4000:4000 -e EMITTER_LICENSE=[key] -e EMITTER_CLUSTER_SEED=[seed] -e EMITTER_CLUSTER_PASSPHRASE=[name] emitter/server

Support, Discussion, and Community

If you need any help with Emitter Server or any of our client SDKs, please join us at either our gitter chat where most of our team hangs out at or drop us an e-mail at info@emitter.io.

Please submit any Emitter bugs, issues, and feature requests to emitter-io>emitter. If there are any security issues, please email info@emitter.io instead of posting an open issue in Github.

Contributing

If you'd like to contribute, please fork the repository and use a feature branch. Pull requests are warmly welcome.

Licensing

Copyright (c) 2009-2019 Misakai Ltd. This project is licensed under Affero General Public License v3.

Emitter offers support contracts and is now also offered via a commercial license. Please contact info@emitter.io for more information.