Add DNS forwarder to DNSServer

libraries/DNSServer/examples/NAPTCaptivePortal/NAPTCaptivePortal.ino

@@ -0,0 +1,385 @@
+/*
+   This example shows the use of the 'DNS forwarder' feature in the DNSServer.
+   It does so by combining two examples CaptivePortalAdvanced and
+   RangeExtender-NAPT. Additionally the CaptivePortalAdvanced part has a few
+   upgrades to the HTML presentation to improve readability and ease of use on
+   mobile devices.
+
+   Also for an example of using HTML chunked response, see handleWifi() in
+   handleHttp.ino.
+
+   This example starts up in Captive Portal mode by default.
+   It starts the SoftAP and NAPT w/o connecting the WLAN side.
+
+   You connect your computer or mobile device to the WiFi Network 'MagicPortal'
+   password 'ShowTime'. Your device should shortly notify you of a Captive
+   Portal and the need to login. If it fails to do so in a timely maner,
+   navigate to http://172.217.28.1/wifi and configure it there.
+
+   Note, until a successful WLAN connection is made all DNS lookups will point
+   back to the SoftAP at 172.217.28.1. This is the Captive Portal element of
+   this example.
+
+   Once the WLAN is connected, your device should notify you that you are
+   connected. This, of course, assumes your WLAN connection has a path to the
+   Internet.
+
+   At this stage we are no longer running as a Captive Portal, but a regular
+   NAPT. The DNSServer will be running with the DNS forwarder enabled. The
+   DNSServer will resolve lookups for 'margicportal' to point to 172.217.28.1
+   and all other lookup request will be forwarded to the 1st DNS server that was
+   in the DHCP response for the WLAN interface.
+
+   You should now be able to access things on the Internet. The ease of access
+   to devices on your home Network may vary. By IP address it should work.
+   Access by a hostname - maybe. Some home routers will use the hostname
+   supplied during DHCP to support a local DNS table; some do not.
+
+   There is an additional possible complication for using the local DNS, the DNS
+   suffix list, this subject is seldom discussed. It is normally handled
+   automaticly by the host computers DNS lookup code. For the DHCP case, the
+   DHCP server will supply a suffix list, if there is one. Then when a name
+   lookup fails and the name does not have a trailing (.)dot the host computer
+   will append a suffix from the list and try again, until successful or the
+   list is exhaused. This topic I fear can become a TL;DR. A quick wrapup by way
+   of an example. On an Ubuntu system run `nmcli dev show eth0 | grep
+   IP4\.DOMAIN` that may show you a suffix list. (replace eth0 with your wlan
+   interface name) Try adding them to the local name you are failing to connect
+   to. For example, assume 'myhost' fails. You see that 'lan' is in the suffix
+   list. Try connecting to 'myhost.lan'.
+
+   mDNS names also will not work. We do not have a way to pass those request
+   back and forth through the NAPT.
+
+   Note if hostnames are going to work for an ESP8266 device on your home
+   Network, you have to have the call to WiFi.hostname(...) before you call
+   WiFi.begin().
+
+   In this example the SoftAP in 'Captive Portal' uses the same public address
+   that was used in the CaptivePortalAdvanced example. Depending on your devices
+   you may or may not be successful in using a private address. A previous
+   PR-author discovered a fix that made the CaptivePortalAdvanced example work
+   better with Android devices. That fix was to use that public address. At this
+   time, this PR-author with a different Android device running the latest
+   version of Android has seen no problems in using either. At least not yet :)
+   FWIW: My device also works with the original CaptivePortalAdvanced example
+   when using a private address. I would suggest keeping the public address
+   for a while. At lest until you are confident everything is working well
+   before experimenting with a private address.
+*/
+
+
+#if LWIP_FEATURES && !LWIP_IPV6
+
+#include <ESP8266WiFi.h>
+#include <lwip/napt.h>
+#include <lwip/dns.h>
+#include <dhcpserver.h>
+#include <WiFiClient.h>
+#include <ESP8266WebServer.h>
+#include <DNSServer.h>
+#include <ESP8266mDNS.h>
+#include <EEPROM.h>
+
+#define NAPT 1000
+#define NAPT_PORT 10
+
+/*
+  Some defines for debugging
+*/
+#ifdef DEBUG_ESP_PORT
+#define CONSOLE DEBUG_ESP_PORT
+#else
+#define CONSOLE Serial
+#endif
+
+#define _PRINTF(a, ...) printf_P(PSTR(a), ##__VA_ARGS__)
+#define _PRINT(a)       print(String(F(a)))
+#define _PRINTLN(a)     println(String(F(a)))
+#define _PRINTLN2(a, b) println(String(F(a)) + b )
+
+#define CONSOLE_PRINTF   CONSOLE._PRINTF
+#define CONSOLE_PRINT    CONSOLE._PRINT
+#define CONSOLE_PRINTLN  CONSOLE._PRINTLN
+#define CONSOLE_PRINTLN2 CONSOLE._PRINTLN2
+
+#ifdef DEBUG_SKETCH
+#define DEBUG_PRINTF    CONSOLE_PRINTF
+#define DEBUG_PRINT     CONSOLE_PRINT
+#define DEBUG_PRINTLN   CONSOLE_PRINTLN
+#define DEBUG_PRINTLN2  CONSOLE_PRINTLN2
+
+#else
+#define DEBUG_PRINTF(...) do { } while(false)
+#define DEBUG_PRINT(...) do { } while(false)
+#define DEBUG_PRINTLN(...) do { } while(false)
+#define DEBUG_PRINTLN2(...) do { } while(false)
+#endif
+
+
+
+/* Set these to your desired softAP credentials. They are not configurable at runtime */
+#ifndef APSSID
+#define APSSID "MagicPortal"
+#define APPSK  "ShowTime"
+#endif
+
+const char *softAP_ssid = APSSID;
+const char *softAP_password = APPSK;
+
+/* hostname for mDNS. Should work at least on windows. Try http://esp8266.local */
+const char *myHostname = "magicportal";
+
+/* Don't set this wifi credentials. They are configurated at runtime and stored on EEPROM */
+char ssid[33] = "";
+char password[65] = "";
+uint8_t bssid[6];
+WiFiEventHandler staModeConnectedHandler;
+WiFiEventHandler staModeDisconnectedHandler;
+
+// DNS server
+const byte DNS_PORT = 53;
+DNSServer dnsServer;
+
+// Web server
+ESP8266WebServer server(80);
+
+/* Soft AP network parameters */
+IPAddress apIP(172, 217, 28, 1);
+IPAddress netMsk(255, 255, 255, 0);
+
+
+/** Should I connect to WLAN asap? */
+bool connect = false;
+
+/** Set to true to start WiFi STA at setup time when credentials loaded successfuly from EEPROM */
+/** Set to false to defer WiFi STA until configured through web interface. */
+bool staReady = false; // Don't connect right away
+
+/** Last time I tried to connect to WLAN */
+unsigned long lastConnectTry = 0;
+
+/** Current WLAN status */
+unsigned int status = WL_IDLE_STATUS;
+
+void setup() {
+  WiFi.persistent(false); // w/o this a flash write occurs at every boot
+  WiFi.mode(WIFI_OFF);    // Prevent use of SDK stored credentials
+  CONSOLE.begin(115200);
+  CONSOLE_PRINTLN("\r\n\r\nNAPT with Configuration Portal ...");
+
+  staModeConnectedHandler = WiFi.onStationModeConnected(
+  [](WiFiEventStationModeConnected data) {
+    // Keep a copy of the BSSID for the AP that WLAN connects to.
+    // This is used in the WLAN report on WiFi Details page.
+    memcpy(bssid, data.bssid, sizeof(bssid));
+  });
+
+  staModeDisconnectedHandler = WiFi.onStationModeDisconnected(
+  [](WiFiEventStationModeDisconnected data) {
+    (void)data;
+    if (dnsServer.isForwarding()) {
+      dnsServer.disableForwarder("*");
+      dnsServer.setTTL(0);
+      // Reminder, Serial.println() will not work from these callbacks.
+      // For debug printf use ets_uart_printf().
+    }
+  });
+
+  /*
+    While you can remove the password parameter to make the AP open.
+    You will be operating with less security and allowing snoopers to see
+    the credentials you use for your WiFi.
+  */
+  WiFi.softAPConfig(apIP, apIP, netMsk);
+  WiFi.softAP(softAP_ssid, softAP_password);
+  // The following comment for delay(500) was committed Aug 19, 2015; is it
+  // still true? Commented out for verification. - APR 2020
+  // delay(500); // Without delay I've seen the IP address blank
+  CONSOLE_PRINTF("SoftAP '%s' started\r\n", softAP_ssid);
+  CONSOLE_PRINTLN2("  IP address: ", WiFi.softAPIP().toString());
+
+  /* Captive portals will usually use a TTL of 0 to avoid DNS cache poisoning. */
+  dnsServer.setTTL(0);
+
+  /* Setup the DNS server redirecting all the domains to the apIP */
+  dnsServer.start(IANA_DNS_PORT, "*", apIP);
+  CONSOLE_PRINTLN("DNSServer started:");
+  CONSOLE_PRINTF("  DNS Forwarding is %s\r\n", dnsServer.isForwarding() ? "on" : "off");
+  CONSOLE_PRINTF("  Resolve all domain lookups, '%s', to this AP's IP address, '%s' %s.\r\n",
+                 dnsServer.getDomainName().c_str(),
+                 softAP_ssid,
+                 WiFi.softAPIP().toString().c_str());
+  CONSOLE_PRINTF("  TTL set to %u\r\n", dnsServer.getTTL());
+
+  /*
+    Do some NAPT startup stuff
+  */
+  CONSOLE_PRINTLN("Begin NAPT initialization:");
+  CONSOLE_PRINTF("  Heap before NAPT init: %d\r\n", ESP.getFreeHeap());
+
+  err_t ret = ip_napt_init(NAPT, NAPT_PORT);
+  CONSOLE_PRINTF("  ip_napt_init(%d,%d): ret=%d (OK=%d)\r\n", NAPT, NAPT_PORT, (int)ret, (int)ERR_OK);
+  if (ret == ERR_OK) {
+    ret = ip_napt_enable_no(SOFTAP_IF, 1);
+    CONSOLE_PRINTF("  ip_napt_enable_no(SOFTAP_IF): ret=%d (OK=%d)\r\n", (int)ret, (int)ERR_OK);
+    if (ret == ERR_OK) {
+      CONSOLE_PRINTF("  NAPT AP '%s' started.\r\n", softAP_ssid);
+      if (WiFi.localIP().isSet()) {
+        CONSOLE_PRINTF("    It is an extension of '%s' made through WLAN interface.\r\n", ssid);
+        CONSOLE_PRINTF("    Remote WLAN IP Address: %s.\r\n", WiFi.localIP().toString().c_str());
+      }
+    }
+  }
+  CONSOLE_PRINTF("  Heap after NAPT init: %d\r\n", ESP.getFreeHeap());
+  if (ret != ERR_OK) {
+    CONSOLE_PRINTF("  NAPT initialization failed!!!\r\n");
+  }
+
+  /* Setup web pages: root, wifi config pages, SO captive portal detectors and not found. */
+  server.on("/", handleRoot);
+  server.on("/wifi", handleWifi);
+  server.on("/wifisave", handleWifiSave);
+  server.on("/generate_204", handleRoot);  //Android captive portal. Maybe not needed. Might be handled by notFound handler.
+  server.on("/fwlink", handleRoot);  //Microsoft captive portal. Maybe not needed. Might be handled by notFound handler.
+  server.onNotFound(handleNotFound);
+  server.begin(); // Web server start
+  CONSOLE_PRINTLN("HTTP server started");
+  loadCredentials(); // Load WLAN credentials from network
+  connect = (strlen(ssid) > 0 && staReady); // Request WLAN connect if there is a SSID and we want to connect at startup
+}
+
+void connectWifi() {
+  CONSOLE_PRINTF("Connecting as wifi client, WLAN, to '%s' ...\r\n", ssid);
+  WiFi.disconnect();
+  /*
+    A call to set hostname, must be set before the call to WiFi.begin, otherwise
+    the name may be missing from the routers DNS lookup results. Note, not all
+    routers will import registered DHCP host names from clients into the active
+    local DNS resolver. For those that do, it is best to set hostname before
+    calling WiFi.begin().
+  */
+  WiFi.hostname(myHostname);
+  WiFi.begin(ssid, password);
+  int connRes = WiFi.waitForConnectResult();
+  if (-1 == connRes) {
+    CONSOLE_PRINTLN("  WiFi.waitForConnectResult() timed out.");
+  } else {
+    CONSOLE_PRINTF("  Connection status: %s, %d\r\n", getWiFiStatusString(connRes).c_str(), connRes);
+  }
+}
+
+void loop() {
+  if (connect) {
+    connect = false;
+    connectWifi();
+    lastConnectTry = millis();
+  }
+  {
+    unsigned int s = WiFi.status();
+    if (s == 0 && millis() > (lastConnectTry + 60000) && ssid[0] && staReady) {
+      /* When all of the following conditions are true, try to connect */
+      /*  1) If WLAN disconnected */
+      /*  2) Required idle time between connect attempts has passed. */
+      /*  3) We have an ssid configured */
+      /*  4) We are ready for the STA to come up */
+      /* Don't set retry time too low as retry interfere the softAP operation */
+      connect = true;
+    }
+    if (status != s) { // WLAN status change
+      CONSOLE_PRINTF("WLAN Status changed:\r\n");
+      CONSOLE_PRINTF("  new status:      %s, %d\r\n", getWiFiStatusString(s).c_str(), s);
+      CONSOLE_PRINTF("  previous status: %s, %d\r\n", getWiFiStatusString(status).c_str(), status);
+      status = s;
+      if (s == WL_CONNECTED) {
+        /* Just connected to WLAN */
+        CONSOLE.println();
+        if (WiFi.localIP().isSet() && WiFi.softAPIP().isSet()) {
+          CONSOLE_PRINTF("NAPT AP '%s' status:\r\n", softAP_ssid);
+          if (WiFi.localIP().isSet()) {
+            CONSOLE_PRINTF("  It is an extension of '%s' made through WLAN interface.\r\n", ssid);
+            CONSOLE_PRINTF("  WLAN connected with IP Address: %s.\r\n", WiFi.localIP().toString().c_str());
+          }
+        } else {
+          CONSOLE_PRINT("WLAN connected to ");
+          CONSOLE.println(ssid);
+          CONSOLE_PRINT("  IP address: ");
+          CONSOLE.println(WiFi.localIP());
+        }
+        // Setup MDNS responder
+        if (!MDNS.begin(myHostname, WiFi.localIP())) {
+          CONSOLE_PRINTLN("  Error setting up MDNS responder!");
+        } else {
+          CONSOLE_PRINTLN("  mDNS responder started");
+          // Add service to MDNS-SD
+          MDNS.addService("http", "tcp", 80);
+        }
+        /*
+          Setup the DNSServer to respond only to request for our hostname and
+          forward other name request to the DNS configured to the WLAN.
+        */
+        dnsServer.setTTL(600); // 10 minutes
+        dnsServer.enableForwarder(myHostname, WiFi.dnsIP(0));
+        CONSOLE_PRINTF("DNSServer changes/status:\r\n");
+        CONSOLE_PRINTF("  DNS Forwarding is %s\r\n", dnsServer.isForwarding() ? "on" : "off");
+        CONSOLE_PRINTF("  Resolve '%s' to this AP's IP address, '%s' %s.\r\n",
+                       dnsServer.getDomainName().c_str(),
+                       softAP_ssid,
+                       WiFi.softAPIP().toString().c_str());
+        if (dnsServer.isDNSSet()) {
+          CONSOLE_PRINTF("  Forward other lookups to DNS: %s\r\n", dnsServer.getDNS().toString().c_str());
+        }
+        CONSOLE_PRINTF("  TTL set to %u\r\n", dnsServer.getTTL());
+
+      } else  {
+        /* Captive portals will usually use a TTL of 0 to avoid DNS cache poisoning. */
+        dnsServer.setTTL(0);
+        /* Setup the DNSServer to redirect all the domain lookups to the apIP */
+        dnsServer.disableForwarder("*");
+        CONSOLE_PRINTF("DNSServer changes/status:\r\n");
+        CONSOLE_PRINTF("  DNS Forwarding is %s\r\n", dnsServer.isForwarding() ? "on" : "off");
+        CONSOLE_PRINTF("  Resolve all domain lookups, '%s', to this AP's IP address, '%s' %s.\r\n",
+                       dnsServer.getDomainName().c_str(),
+                       softAP_ssid,
+                       WiFi.softAPIP().toString().c_str());
+        CONSOLE_PRINTF("  TTL set to %u\r\n", dnsServer.getTTL());
+
+        // Note, it is not necessary to clear the DNS forwarder address. This
+        // is being done here, to test that methods isDNSSet() and setDNS() work.
+        dnsServer.setDNS(0U);
+        if (dnsServer.isDNSSet()) {
+          CONSOLE_PRINTF("  DNS forwarder address: %s\r\n", dnsServer.getDNS().toString().c_str());
+        } else {
+          CONSOLE_PRINTF("  DNS forwarder address not set.\r\n");
+        }
+
+        if (s == WL_NO_SSID_AVAIL) {
+          WiFi.disconnect();
+        }
+      }
+    }
+    if (s == WL_CONNECTED) {
+      MDNS.update();
+    }
+  }
+  // Do work:
+  //DNS
+  dnsServer.processNextRequest();
+  //HTTP
+  server.handleClient();
+}
+
+#else  // LWIP_FEATURES && !LWIP_IPV6
+
+#include <ESP8266WiFi.h>
+void setup() {
+  WiFi.persistent(false);
+  WiFi.mode(WIFI_OFF);
+  Serial.begin(115200);
+  Serial.printf("\n\nNAPT not supported in this configuration\n");
+}
+
+void loop() {
+}
+
+#endif // LWIP_FEATURES && !LWIP_IPV6