Elvi shows 0.0 kW while charging with 11 kW #14138
-
Describe the bugHi, like the title says, whenever I'm charging my car it does not show the power used and therefor doesn't show any historical charging sessions either. (The car is charging at 11 kW on those screenshots). Inverter: Charger: The documentation says, that even without an integrated meter at the wallbox it should show those charging values:
Even the log is showing Any help is appreciated. Steps to reproduce
... Configuration details# open evcc at http://evcc.local:7070
network:
schema: http
host: evcc.local # .local suffix announces the hostname on MDNS
port: 7070
log: debug
levels:
cache: error
# unique installation id
plant: <ID>
interval: 30s # control cycle interval
meters:
- type: template
template: fronius-solarapi-v1
usage: grid
host: <IPADDRESS>
user: customer
password: <PASSWORD>
name: grid1
- type: template
template: fronius-solarapi-v1
usage: pv
host: <IPADDRESS>
user: customer
password: <PASSWORD>
name: pv2
- type: template
template: fronius-solarapi-v1
usage: battery
host: <IPADDRESS>
user: customer
password: <PASSWORD>
name: battery3
chargers:
- type: template
template: elvi
stationid: <STATION_ID>
idtag: <ID_TAG>
connecttimeout: 5m
timeout: 2m
meter: false
name: wallbox_garage
vehicles:
- type: template
template: hyundai
title: Hyundai IONIQ 5
icon: car
user: <USER>
password: <PASSWORD>
vin: <VIN>
capacity: 77.4
phases: 3
cache: 15m
language: de
mode: pv
minCurrent: 6
maxCurrent: 16
name: ev4
loadpoints:
- title: Garage
charger: wallbox_garage
vehicle: ev4
mode: pv
enable:
threshold: 0
delay: 15m
disable:
threshold: 300
delay: 15m
site:
title: Mein Zuhause
meters:
grid: grid1
pv:
- pv2
battery:
- battery3 Log details
What type of operating system are you running?Linux Versionevcc version 0.126.5 |
Beta Was this translation helpful? Give feedback.
Replies: 8 comments 58 replies
-
Seems charger is starting by itself:
After that the disable timer starts:
But according to config it will take 15m to do anything. I think we're not reducing the current within these 15min since we kinda assume that disabling the loadpoint will sooner or later fix the problem. |
Beta Was this translation helpful? Give feedback.
-
And what exactly does that mean? Like why is the charger logic not working but charging anyways? |
Beta Was this translation helpful? Give feedback.
-
In order to prevent charging you have to:
That way evcc has full control over the charging process. |
Beta Was this translation helpful? Give feedback.
-
The answer is still #14138 (comment) |
Beta Was this translation helpful? Give feedback.
-
okay will open ticket with evbox, keep you posted |
Beta Was this translation helpful? Give feedback.
-
Hello, chargers:
vehicles:
loadpoints:
Major difference is, that there is no enable: / disable: and mode: , phases:, mincurrent:, maxcurrent: belongs to the loadpoint instead of the vehicle. I understand that your configuration is more flexible if you have different cars, but it may be worth a try that way. But in general it works without a meter - as far as I understand evcc shows the power value which has been sent to the wallbox and calculates the energy by the power and the time of charging. Wish you good luck! |
Beta Was this translation helpful? Give feedback.
-
Using the |
Beta Was this translation helpful? Give feedback.
-
From what I understood, Elvi claims meter values even if no meter installed? Please try
that should make evcc not find any meter value. If that doesn't work another log would be helpful. |
Beta Was this translation helpful? Give feedback.
Ist nicht read-only:
{"key":"MeterValuesSampledData","readonly":false,"value":"Current.Import,Current.Offered,Energy.Active.Import.Register,Power.Active.Import,Temperature,Voltage,Frequency"}
aber "blafoowusel" kein gültiger Measurand und wird daher hier
abgelehnt.
Es dürfen nur gültige Measurands verwenden werden, ggf. auch ein Leerstring.
In letzterem Fall kann man
MeterValueSampleInterval
aber auch einfach auf 0 setzen.Für die Elvi ohne Zähler w…