Habitat Navigation Challenge 2023

This repository contains the starter code for the 2023 Habitat [1] challenge, details of the tasks, and training and evaluation setups. For an overview of habitat-challenge, visit aihabitat.org/challenge.

If you are looking for our 2022/2021/2020/2019 starter code, it’s available in the challenge-YEAR branch.

This year, we are hosting a challenges on the ObjectNav and ImageNav embodied navigation task.

Task #1: ObjectNav focuses on egocentric object/scene recognition and a commonsense understanding of object semantics (where is a bed typically located in a house?).

Task #2: ImageNav focuses on visual reasoning and embodied instance disambiguation (is the particular chair I observe the same one depicted by the goal image?).

New in 2023

We are instantiating ObjectNav on a new version of the HM3D-Semantics dataset called HM3D-Semantics v0.2.
We are announcing the ImageNav track, also on the HM3D-Semantics v0.2 scene dataset.
We are introducing several changes in the agent config for easier sim-to-real transfer. We are using the HelloRobot Stretch robot configuration with support of continuous action space and updating the dataset such that all episodes can be navigated without traversing between floors.

Task: ObjectNav

In ObjectNav, an agent is initialized at a random starting position and orientation in an unseen environment and asked to find an instance of an object category (‘find a chair’) by navigating to it. A map of the environment is not provided and the agent must only use its sensory input to navigate.

The agent is modeled after the Hello Stretch robot and equipped with an RGB-D camera and a (noiseless) GPS+Compass sensor. GPS+Compass sensor provides the agent’s current location and orientation information relative to the start of the episode.

Dataset

The 2023 ObjectNav challenge uses 216 scenes from the HM3D-Semantics v0.2 [2] dataset with train/val/test splits on 145/36/35. Following Chaplot et al. [3], we use 6 object goal categories: chair, couch, potted plant, bed, toilet and tv. All episodes can be navigated without traversing between floors.

Task: ImageNav

In ImageNav, an agent is initialized at a random start pose in an unseen environment and given an RGB goal image. We adopt the Instance ImageNav [4] task definition where the goal image depicts a particular object instance and the agent is asked to navigate to that object.

The goal camera is disentangled from the agent's camera; sampled parameters such as height, look-at-angle, and field-of-view reflect the realistic use case of a user-supplied goal image.

Similar to ObjectNav, the agent is modeled after the Hello Stretch robot and equipped with an RGB-D camera and a (noiseless) GPS+Compass sensor.

Dataset

The 2023 ImageNav challenge uses 216 scenes from the HM3D-Semantics v0.2[2] dataset with train/val/test splits on 145/36/35. Following Krantz et al. [4], we sample goal images depicting object instances belonging to the same 6 goal categories used in the ObjectNav challenge: chair, couch, potted plant, bed, toilet, and tv. All episodes can be navigated without traversing between floors.

Action Space

To allow easier sim-to-real transfer of the policies from simulation to the Stretch Robot, we are changing the agent's action space from discrete space to continuous space. The agent now accepts the following actions:

linear_velocity: Moves the agent forward or backward. Accepts values between [-1,1], scaled according to lin_vel_range defined in the VelocityControlActionConfig.
angular_velocity: Moves the agent left or right. Accepts values between [-1,1], scaled according to ang_vel_range defined in the VelocityControlActionConfig.
camera_pitch_velocity: Tilts the camera up or down. Accepts values between [-1,1], scaled according to ang_vel_range_camera_pitch defined in the VelocityControlActionConfig.
velocity_stop: Action used for ending the episode. Accepts values between [-1,1]. Value greater than 0 ends the episode.

While the agent accepts actions only in the continuous space, we are also providing the following set of controllers that will allow policy to predict actions in a more abstract action space:

Waypoint Controller: The waypoint controller takes in the following inputs and calculates the velocity commands that are passed to the simulator:
1. xyt_waypoint: Moves the agent to a waypoint (x, y) and turns the agent by t radians. Accepts values between [-1,1], scaled according to waypoint_lin_range and waypoint_ang_range defined in the WaypointControlActionConfig.
2. max_duration: The amount of seconds the waypoint controller should take steps in the simulator before asking the policy for the next waypoint. Accepts values between [0,1], scaled according to wait_duration_range defined in the WaypointControlActionConfig.
3. delta_camera_pitch_angle: np.random.rand(1), Accepts values between [-1,1], scaled according to ang_vel_range from the WaypointControlActionConfig.
4. velocity_stop: Action used for ending the episode. Accepts values between [-1,1]. Value greater than 0 ends the episode.
Discrete Waypoint Controller: This controller allows you to try out the policies trained with the discrete action space that was used in the older versions of the navigation tasks in Habitat. The controller accepts one of the following actions:
1. move_forward_waypoint: Moves the agent forward by 25 centimeters.
2. turn_left_waypoint: Turns the agent towards the left by 30 degrees.
3. turn_right_waypoint: Turns the agent towards the left by 30 degrees.
4. look_up_discrete_to_velocity: Tilts the camera upwards by 30 degrees, while respecting the maximum tilt angle defined by ang_range_camera_pitch in the VelocityControlActionConfig.
5. look_down_discrete_to_velocity: Tilts the camera downwards by 30 degrees, while respecting the minimum tilt angle defined by ang_range_camera_pitch in the VelocityControlActionConfig.

Evaluation

Similar to 2022 Habitat Challenge, we measure performance along the same two axes as specified by Anderson et al.[4]:

Success: Did the agent navigate to an instance of the goal object? (Notice: any instance, regardless of distance from starting location.)

Concretely, an episode is deemed successful if on calling the STOP action, the agent is within 1.0m Euclidean distance from any instance of the target object category AND the object can be viewed by an oracle from that stopping position by turning the agent or looking up/down. Notice: we do NOT require the agent to be actually viewing the object at the stopping location, simply that such oracle-visibility is possible without moving. Why? Because we want participants to focus on navigation, not object framing. In Embodied AI’s larger goal, the agent is navigating to an object instance to interact with it (say point at or manipulate an object). Oracle-visibility is our proxy for ‘the agent is close enough to interact with the object’.
SPL: How efficient was the agent’s path compared to an optimal path? (Notice: for ObjectNav, optimal path = shortest path from the agent’s starting position to the closest instance of the target object category.)

After calling the STOP action, the agent is evaluated using the ‘Success weighted by Path Length’ (SPL) metric [4].

ObjectNav-SPL is defined analogous to PointNav-SPL. The only key difference is that the shortest path is computed to the object instance closest to the agent start location. Thus, if an agent spawns very close to ‘chair1’ but stops at a distant ‘chair2’, it will achieve 100% success (because it found a ‘chair’) but a fairly low SPL (because the agent path is much longer compared to the oracle path). ImageNav-SPL is similar to ObjectNav-SPL except that there is exactly one correct object instance (shown in the goal image).

We reserve the right to use additional metrics to choose winners in case of statistically insignificant SPL differences.

Participation Guidelines

Participate in the contest by registering on the EvalAI challenge page and creating a team. Participants will upload docker containers with their agents that are evaluated on an AWS GPU-enabled instance. Before pushing the submissions for remote evaluation, participants should test the submission docker locally to ensure it is working. Instructions for training, local evaluation, and online submission are provided below.

For your convenience, please check our Habitat Challenge video tutorial and Colab step-by-step tutorial from previous year.

Local Evaluation

Clone the challenge repository:

git clone https://github.com/facebookresearch/habitat-challenge.git
cd habitat-challenge

Implement your own agent or try one of ours. We provide an agent in agents/agent.py that takes random actions:

import habitat
from omegaconf import DictConfig

class RandomAgent(habitat.Agent):
    def __init__(self, task_config: DictConfig):
        self._task_config = task_config

    def reset(self):
        pass

    def act(self, observations):
        return {
            'action': ("velocity_control", "velocity_stop"),
            'action_args': {
                "angular_velocity": np.random.rand(1),
                "linear_velocity": np.random.rand(1),
                "camera_pitch_velocity": np.random.rand(1),
                "velocity_stop": np.random.rand(1),
            }
        }


def main():
    agent = RandomAgent(task_config=config)
    challenge = habitat.Challenge()
    challenge.submit(agent)

Install nvidia-docker v2 following instructions here: https://docs.nvidia.com/datacenter/cloud-native/container-toolkit/install-guide.html#docker. Note: only supports Linux; no Windows or MacOS.
Modify the provided Dockerfile (docker/{ObjectNav, ImageNav}_random_baseline.Dockerfile) if you need custom modifications. Let’s say your code needs pytorch, these dependencies should be pip installed inside a conda environment called habitat that is shipped with our habitat-challenge docker, as shown below:
```
FROM fairembodied/habitat-challenge:habitat_navigation_2023_base_docker

# install dependencies in the habitat conda environment
RUN /bin/bash -c ". activate habitat; pip install torch"

ADD agents/agent.py /agent.py
ADD submission.sh /submission.sh
```
Build your docker container using: docker build . --file docker/{ObjectNav, ImageNav}_random_baseline.Dockerfile -t {objectnav, imagenav}_submission.

Note #1: you may need sudo privileges to run this command.

Note #2: Please make sure that you keep your local version of fairembodied/habitat-challenge:habitat_navigation_2023_base_docker image up to date with the image we have hosted on dockerhub. This can be done by pruning all cached images, using:
```
docker system prune -a
```
[Optional] Modify submission.sh file if your agent needs any custom modifications (e.g. command-line arguments). Otherwise, nothing to do. Default submission.sh is simply a call to RandomAgent agent in agent.py

Scene Dataset: Download Habitat-Matterport3D Dataset scenes used for Habitat Challenge here. Place this data in: habitat-challenge/habitat-challenge-data/data/scene_datasets/hm3d_v0.2

Using Symlinks: If you used symlinks (i.e. ln -s) to link to an existing download of HM3D, there is an additional step. First, make sure there is only one level of symlink (instead of a symlink to a symlink link to a .... symlink) with

ln -f -s $(realpath habitat-challenge-data/data/scene_datasets/hm3d_v0.2) \
    habitat-challenge-data/data/scene_datasets/hm3d_v0.2

Then modify the docker command in scripts/test_local_{objectnav, imagenav}.sh file to mount the linked to location by adding -v $(realpath habitat-challenge-data/data/scene_datasets/hm3d_v0.2):/habitat-challenge-data/data/scene_datasets/hm3d_v0.2. The modified docker command would be

# ObjectNav
docker run \
     -v $(pwd)/habitat-challenge-data:/habitat-challenge-data \
     -v $(realpath habitat-challenge-data/data/scene_datasets/hm3d_v0.2):/habitat-challenge-data/data/scene_datasets/hm3d_v0.2 \
     --runtime=nvidia \
     -e "AGENT_EVALUATION_TYPE=local" \
     -e "TRACK_CONFIG_FILE=/configs/benchmark/nav/objectnav/objectnav_v2_hm3d_stretch_challenge.yaml" \
     ${DOCKER_NAME}

# ImageNav
docker run \
     -v $(pwd)/habitat-challenge-data:/habitat-challenge-data \
     -v $(realpath habitat-challenge-data/data/scene_datasets/hm3d_v0.2):/habitat-challenge-data/data/scene_datasets/hm3d_v0.2 \
     --runtime=nvidia \
     -e "AGENT_EVALUATION_TYPE=local" \
     -e "TRACK_CONFIG_FILE=/configs/benchmark/nav/imagenav/imagenav_hm3d_v3_challenge.yaml" \
     ${DOCKER_NAME}

Evaluate your docker container locally:

# Testing ObjectNav
./scripts/test_local_objectnav.sh --docker-name objectnav_submission

# Testing ImageNav
./scripts/test_local_imagenav.sh --docker-name imagenav_submission

If the above command runs successfully you will get an output similar to:

2023-03-01 16:35:02,244 distance_to_goal: 6.446822468439738
2023-03-01 16:35:02,244 success: 0.0
2023-03-01 16:35:02,244 spl: 0.0
2023-03-01 16:35:02,244 soft_spl: 0.0014486297806195665
2023-03-01 16:35:02,244 num_steps: 1.0
2023-03-01 16:35:02,244 collisions/count: 0.0
2023-03-01 16:35:02,244 collisions/is_collision: 0.0
2023-03-01 16:35:02,244 distance_to_goal_reward: 0.0009365876515706381

Note: this same command will be run to evaluate your agent for the leaderboard. Please submit your docker for remote evaluation (below) only if it runs successfully on your local setup.

If you want to try out one of the controllers we provide, change the "--action_space" in the dockerfile (docker/{ObjectNav, ImageNav}_random_baseline.Dockerfile) to use either waypoint_controller or discrete_waypoint_controller.

Online submission

Follow instructions in the submit tab of the EvalAI challenge page to submit your docker image. Note that you will need a version of EvalAI >= 1.2.3. Pasting those instructions here for convenience:

# Installing EvalAI Command Line Interface
pip install "evalai>=1.3.5"

# Set EvalAI account token
evalai set_token <your EvalAI participant token>

# Push docker image to EvalAI docker registry
# ObjectNav
evalai push objectnav_submission:latest --phase <phase-name>

# ImageNav
evalai push imagenav_submission:latest --phase <phase-name>

The challenge consists of the following phases:

Minival phase: This split is the same as the one used in ./scripts/test_local_{objectnav, imagenav}.sh. The purpose of this phase/split is sanity checking -- to confirm that our remote evaluation reports the same result as the one you’re seeing locally. Each team is allowed maximum of 100 submissions per day for this phase, but please use them judiciously. We will block and disqualify teams that spam our servers.
Test Standard phase: The purpose of this phase/split is to serve as the public leaderboard establishing the state of the art; this is what should be used to report results in papers. Each team is allowed maximum of 10 submissions per day for this phase, but again, please use them judiciously. Don’t overfit to the test set.
Test Challenge phase: This phase/split will be used to decide challenge winners. Each team is allowed a total of 5 submissions until the end of challenge submission phase. The highest performing of these 5 will be automatically chosen. Results on this split will not be made public until the announcement of final results at the Embodied AI workshop at CVPR.

Note: Your agent will be evaluated on 1000 episodes and will have a total available time of 48 hours to finish. Your submissions will be evaluated on AWS EC2 p2.xlarge instance which has a Tesla K80 GPU (12 GB Memory), 4 CPU cores, and 61 GB RAM. If you need more time/resources for evaluation of your submission please get in touch. If you face any issues or have questions you can ask them by opening an issue on this repository.

ObjectNav/ImageNav Baselines and DD-PPO Training Starter Code

We have added a config in configs/ddppo_objectnav_v2_hm3d_stretch.yaml | configs/ddppo_imagenav_v3_hm3d_stretch.yaml that includes a baseline using DD-PPO from Habitat-Lab.

Install the Habitat-Sim and Habitat-Lab packages. You can install Habitat-Sim using our custom Conda package for habitat challenge 2023 with: conda install -c aihabitat habitat-sim-challenge-2023. For Habitat-Lab, we have created the habitat-challenge-2023 tag in our Github repo, which can be cloned using: git clone --branch challenge-2023 https://github.com/facebookresearch/habitat-lab.git. Please ensure that both habitat-lab and habitat-baselines packages are installed using pip install -e habitat-lab and pip install -e habitat-baselines. You will find further information for installation in the Github repositories.
Download the HM3D scene dataset following the instructions here. After downloading extract the dataset to folder habitat-lab/data/scene_datasets/hm3d_v0.2/ folder (this folder should contain the .glb files from HM3D). Note that the habitat-lab folder is the habitat-lab repository folder. You could also just symlink to the path of the HM3D scenes downloaded in step-4 of local-evaluation under the habitat-challenge/habitat-challenge-data/data/scene_datasets folder. This can be done using ln -s /path/to/habitat-challenge-data/data/scene_datasets /path/to/habitat-lab/data/scene_datasets/ (if on OSX or Linux).
ObjectNav: Download the episodes dataset for HM3D ObjectNav from link and place it in the folder habitat-challenge/habitat-challenge-data/data/datasets/objectnav/hm3d. If placed correctly, you should have the train and val splits at habitat-challenge/habitat-challenge-data/data/datasets/objectnav/hm3d/v2/train/ and habitat-challenge/habitat-challenge-data/data/datasets/objectnav/hm3d/v2/val/ respectively.

ImageNav Download the episodes dataset for HM3D InstanceImageNav from link and place it in the folder habitat-challenge/habitat-challenge-data/data/datasets/instance_imagenav/hm3d. If placed correctly, you should have the train and val splits at habitat-challenge/habitat-challenge-data/data/datasets/instance_imagenav/hm3d/v3/train/ and habitat-challenge/habitat-challenge-data/data/datasets/instance_imagenav/hm3d/v3/val/ respectively.
An example on how to train DD-PPO model can be found in habitat-lab/habitat-baselines/habitat_baselines/rl/ddppo. See the corresponding README in habitat-lab for how to adjust the various hyperparameters, save locations, visual encoders and other features.
1. To run on a single machine use the script single_node.sh from the habitat-lab directory, where $task={objectnav_v2, imagenav_v3}:
```
#/bin/bash

export GLOG_minloglevel=2
export MAGNUM_LOG=quiet

set -x

python -u -m torch.distributed.launch \
    --use_env \
    --nproc_per_node 1 \
    habitat_baselines/run.py \
    --config-name=configs/ddppo_${task}_hm3d_stretch.yaml
```
2. There is also an example script named multi_node_slurm.sh for running the code in distributed mode on a cluster with SLURM. While this is not necessary, if you have access to a cluster, it can significantly speed up training. To run on multiple machines in a SLURM cluster run the following script: change #SBATCH --nodes $NUM_OF_MACHINES to the number of machines and #SBATCH --ntasks-per-node $NUM_OF_GPUS and $SBATCH --gpus $NUM_OF_GPUS to specify the number of GPUS to use per requested machine.
```
#!/bin/bash
#SBATCH --job-name=ddppo
#SBATCH --output=logs.ddppo.out
#SBATCH --error=logs.ddppo.err
#SBATCH --gpus 1
#SBATCH --nodes 1
#SBATCH --cpus-per-task 10
#SBATCH --ntasks-per-node 1
#SBATCH --mem=60GB
#SBATCH --time=72:00:00
#SBATCH --signal=USR1@90
#SBATCH --requeue
#SBATCH --partition=dev

export GLOG_minloglevel=2
export MAGNUM_LOG=quiet

MAIN_ADDR=$(scontrol show hostnames "${SLURM_JOB_NODELIST}" | head -n 1)
export MAIN_ADDR

set -x
srun python -u -m habitat_baselines.run \
    --config-name=configs/ddppo_${task}_hm3d_stretch.yaml
```

The checkpoint specified by $PATH_TO_CHECKPOINT can evaluated based on the SPL and other measurements by running the following command:

python -u -m habitat_baselines.run \
    --config-name=configs/ddppo_${task}_hm3d_stretch.yaml \
    habitat_baselines.evaluate=True \
    habitat_baselines.eval_ckpt_path_dir=$PATH_TO_CHECKPOINT \
    habitat.dataset.data_path.split=val

The weights used for our DD-PPO Objectnav or Imagenav baseline for the Habitat-2023 challenge can be downloaded with the following command:

wget https://dl.fbaipublicfiles.com/habitat/data/baselines/v1/{task}_baseline_habitat_navigation_challenge_2023.pth

where $task={objectnav, imagenav}.

To submit your entry via EvalAI, you will need to build a docker file. We provide Dockerfiles ready to use with the DD-PPO baselines in docker/{ObjectNav, ImageNav}_ddppo_baseline.Dockerfile. For the sake of completeness, we describe how you can make your own Dockerfile below. If you just want to test the baseline code, feel free to skip this bullet because ObjectNav_ddppo_baseline.Dockerfile is ready to use.
1. You may want to modify the {ObjectNav, ImageNav}_ddppo_baseline.Dockerfile to include PyTorch or other libraries. To install pytorch, ifcfg and tensorboard, add the following command to the Docker file:
```
RUN /bin/bash -c ". activate habitat; pip install ifcfg torch tensorboard"
```
2. You change which agent.py and which submission.sh script is used in the Docker, modify the following lines and replace the first agent.py or submission.sh with your new files:
```
ADD agents/agent.py agent.py
ADD submission.sh submission.sh
```
3. Do not forget to add any other files you may need in the Docker, for example, we add the demo.ckpt.pth file which is the saved weights from the DD-PPO example code.
4. Finally, modify the submission.sh script to run the appropriate command to test your agents. The scaffold for this code can be found in agent.py and the DD-PPO specific agent can be found in habitat_baselines_agents.py. In this example, we only modify the final command of the ObjectNav/ImageNav docker: by adding the following args to submission.sh --model-path demo.ckpt.pth --input-type rgbd. The default submission.sh script will pass these args to the python script. You may also replace the submission.sh.

Once your Dockerfile and other code is modified to your satisfaction, build it with the following command.

docker build . --file docker/{ObjectNav, ImageNav}_ddppo_baseline.Dockerfile -t {objectnav, imagenav}_submission

To test locally simple run the scripts/test_local_{objectnav, imagenav}.sh script. If the docker runs your code without errors, it should work on Eval-AI. The instructions for submitting the Docker to EvalAI are listed above.
Happy hacking!

Citing Habitat Challenge 2023

Please cite the following bibtex when referring to the 2023 Navigation challenge:

@misc{habitatchallenge2023,
  title         =     Habitat Challenge 2023,
  author        =     {Karmesh Yadav and Jacob Krantz and Ram Ramrakhya and Santhosh Kumar Ramakrishnan and Jimmy Yang and Austin Wang and John Turner and Aaron Gokaslan and Vincent-Pierre Berges and Roozbeh Mootaghi and Oleksandr Maksymets and Angel X Chang and Manolis Savva and Alexander Clegg and Devendra Singh Chaplot and Dhruv Batra},
  howpublished  =     {\url{https://aihabitat.org/challenge/2023/}},
  year          =     {2023}
}

Acknowledgments

The Habitat challenge would not have been possible without the infrastructure and support of EvalAI team. We also thank the team behind Habitat-Matterport3D and HM3D-Semantics datasets.

References

[1] Habitat: A Platform for Embodied AI Research. Manolis Savva*, Abhishek Kadian*, Oleksandr Maksymets*, Yili Zhao, Erik Wijmans, Bhavana Jain, Julian Straub, Jia Liu, Vladlen Koltun, Jitendra Malik, Devi Parikh, Dhruv Batra. IEEE/CVF International Conference on Computer Vision (ICCV), 2019.

[2] Habitat-Matterport 3D Semantics Dataset (HM3DSem). Karmesh Yadav*, Ram Ramrakhya*, Santhosh Kumar Ramakrishnan*, Theo Gervet, John Turner, Aaron Gokaslan, Noah Maestre, Angel Xuan Chang, Dhruv Batra, Manolis Savva, Alexander William Clegg^, Devendra Singh Chaplot^. arXiv:2210.05633, 2022.

[3] Object Goal Navigation using Goal-Oriented Semantic Exploration Devendra Singh Chaplot, Dhiraj Gandhi, Abhinav Gupta, Ruslan Salakhutdinov. NeurIPS, 2020.

[4] Instance-Specific Image Goal Navigation: Training Embodied Agents to Find Object Instances. Jacob Krantz, Stefan Lee, Jitendra Malik, Dhruv Batra, Devendra Singh Chaplot. arxiv:2211.15876, 2022.

[5] On evaluation of embodied navigation agents. Peter Anderson, Angel Chang, Devendra Singh Chaplot, Alexey Dosovitskiy, Saurabh Gupta, Vladlen Koltun, Jana Kosecka, Jitendra Malik, Roozbeh Mottaghi, Manolis Savva, Amir R. Zamir. arXiv:1807.06757, 2018.

Name		Name	Last commit message	Last commit date
Latest commit History 206 Commits
.circleci		.circleci
agents		agents
configs		configs
docker		docker
habitat-challenge-data/data/datasets		habitat-challenge-data/data/datasets
res/img		res/img
scripts		scripts
.dockerignore		.dockerignore
.editorconfig		.editorconfig
.gitignore		.gitignore
CODE_OF_CONDUCT.md		CODE_OF_CONDUCT.md
CONTRIBUTING.md		CONTRIBUTING.md
LICENSE		LICENSE
README.md		README.md

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Habitat Navigation Challenge 2023

New in 2023

Task: ObjectNav

Dataset

Task: ImageNav

Dataset

Action Space

Evaluation

Participation Guidelines

Local Evaluation

Online submission

ObjectNav/ImageNav Baselines and DD-PPO Training Starter Code

Citing Habitat Challenge 2023

Acknowledgments

References

About

Releases

Packages

Contributors 14

Languages

License

facebookresearch/habitat-challenge

Folders and files

Latest commit

History

Repository files navigation

Habitat Navigation Challenge 2023

New in 2023

Task: ObjectNav

Dataset

Task: ImageNav

Dataset

Action Space

Evaluation

Participation Guidelines

Local Evaluation

Online submission

ObjectNav/ImageNav Baselines and DD-PPO Training Starter Code

Citing Habitat Challenge 2023

Acknowledgments

References

About

Resources

License

Code of conduct

Security policy

Stars

Watchers

Forks

Releases

Packages 0

Contributors 14

Languages

Packages