AVRDUDE - AVR Downloader Uploader - is a program for downloading and uploading the on-chip memories of Microchip’s AVR microcontrollers. It can program the Flash and EEPROM, and where supported by the programming protocol, it can program fuse and lock bits. AVRDUDE also supplies a direct instruction mode allowing one to issue any programming instruction to the AVR chip regardless of whether AVRDUDE implements that specific feature of a particular chip.
AVRDUDE was originally written in 2003 by Brian S. Dean. Since 2006, AVRDUDE has been maintained by Jörg Wunsch, with the help of various contributors.
The latest version of AVRDUDE is always available here:
https://github.com/avrdudes/avrdude
Documentation for current and previous releases is on Github Pages.
To get AVRDUDE for Windows, install the latest version from the Releases page.
Alternatively, you may build AVRDUDE yourself from source.
To install AVRDUDE for Linux, install the package avrdude using the software package manager. For example, under Debian/Ubuntu, you can use the following commands:
sudo apt-get install avrdudeAlternatively, you may build AVRDUDE yourself from source.
On macOS, AVRDUDE can be installed through MacPorts or Homebrew.
Alternatively, you may build AVRDUDE yourself from source.
AVRDUDE is a command-line application. Run the command avrdude without any arguments for a list of options.
A typical command to program your HEX file into your AVR microcontroller looks like this:
avrdude -c <programmer> -p <part> -U flash:w:<file>:iFor instance, to program an Arduino Uno connected to the serial port COM1 with a HEX file called blink.hex,
you would run the following command:
avrdude -c arduino -P COM1 -b 115200 -p atmega328p -D -U flash:w:objs/blink.hex:iThere are many different programmers and options that may be required for the programming to succeed.
For more information, refer to the AVRDUDE documentation.